Bobcat Drive Motor Troubleshooting using a Hydraulic Porta Power

Поділитися
Вставка
  • Опубліковано 13 жов 2024
  • Bobcat T590 has issues with both drive motors. We look at some troubleshooting tips to help with the repair.
    shop.bobcat.com
    www.4tetradgro...
    Tools We Use:
    Hydraulic Cylinder Spanner amzn.to/3SAlHYw
    Another Spanner Option amzn.to/3LR1JFb
    Hydraulic Seal Clasper www.4tetradgro...
    Hydraulic Seal Stretcher www.4tetradgro...
    Injector Block Off Cap www.4tetradgro...
    Bobcat Fuel Filter Bowl Wrench www.4tetradgro...
    Wrench Extender amzn.to/3Yt2yvl
    Spring Compressor Tool amzn.to/4fA030n
    Hydraulic Seal Installation Kit amzn.to/3Yrs6sV
    Hand Impact Tool amzn.to/3Sz0yOk
    Common Rail Fuel Injector Test Kit amzn.to/4dasD6T
    Injector Leak Back Test Kit amzn.to/46Btf3i
    Electrical Supplies:
    Milwaukee Solder Iron amzn.to/4dpp0cY
    Tesa Harness Tape amzn.to/3SAdG60
    X Fasten Harness Tape amzn.to/4cbItNA
    Non-Insulated Terminals amzn.to/4dp18XH
    Short / Open Tester Power Probe amzn.to/3WRdrpu
    Power Probe Master Kit amzn.to/3WPETUR
    Shop Supplies:
    Gloveworks Nitrile Gloves amzn.to/3WADdwW
    Oil Absorbent Pads amzn.to/4ckYq48
    Absorbent Pads amzn.to/3WOX64P
    Brake Cleaner (Its Really Good) amzn.to/3yse3sA

КОМЕНТАРІ • 25

  • @crf50crazy
    @crf50crazy 11 місяців тому +12

    Best guy to watch working on bobcat brand equipment on UA-cam. Thank you sir!!

  • @Asomesauc
    @Asomesauc 11 місяців тому +5

    I really appreciate the quality of your videos. They have gotten much better. I'm glad you worked it out with Bobcat To be able to make these videos.

  • @AlexPerez-gj7iu
    @AlexPerez-gj7iu 10 місяців тому +2

    this is more entertaining than the playoffs thank you big dog!!!!!!

  • @karanveersingh899
    @karanveersingh899 Місяць тому +1

    gave me such knowledgeable information. really appreciate you guys. I was looking for some information on drive motor these guys filled me in with that data

  • @HidráulicaSincelejoIngenieria
    @HidráulicaSincelejoIngenieria 11 місяців тому +2

    I have learned much more with your videos, keep it up I would like a video of the Bics valves in the S250

  • @kylejohnson7464
    @kylejohnson7464 11 місяців тому +2

    Thanks for your videos . They are always very informative . Looking forward to many . Keep up the great work .

  • @Stoparts
    @Stoparts 9 місяців тому

    Hello from Turkey/Istanbul colleagues.
    Nice job

  • @martincassidy4839
    @martincassidy4839 4 місяці тому

    On any hydrostatic pump.
    The slippers have groves in them for lubrication purposes, can not be lapped, plus you need to check the end float in the piston and the slippers, if lots of movement in slippers can cause massive failures.
    The lens plate can not be turned over it is one-sided only.
    The hydraulic functions have their own hydraulic pump and system .

  • @CTSCAPER
    @CTSCAPER 11 місяців тому +1

    Could this damage have been avoided if the machine was taken out of service at the first hint of a problem, or perhaps at the end of the day or the next day?

  • @christycarter75
    @christycarter75 3 місяці тому

    Hello great videos,can you tell me what size the caps are for the brake lines? Thanks

  • @jamalelmaskaouy2753
    @jamalelmaskaouy2753 10 місяців тому +1

    Sir, I have questions about the Bobcat engine. I am a Bobcat driver. Please help me. The Bobcat engine is leaking oil. It is not from Lagog. Oil is coming out from under the engine..? Thank you

  • @jonrdahlin4390
    @jonrdahlin4390 11 місяців тому +1

    I just pulled a drive motor on a t650 yesterday. Brake seals blown out and pushing oil out of the of the hub seal.

  • @chrishall8142
    @chrishall8142 11 місяців тому +1

    Should you get steam coming of a drive motor when you drive in a puddle .. I’ve got low power on all drive and lift functions .. and bucket drops fast with a load in it

  • @nlambuca
    @nlambuca 2 місяці тому

    question iwth an ASV MD70. when I try to move, motor starts stalling, that tells me pump is ok and motor is ok, right? now I can't find the break details on that motor to check. Can you help?

  • @Jimmysanders-k1v
    @Jimmysanders-k1v 2 місяці тому

    what is a normal operating temp on a drive motor i just got a t550 thx

  • @wademizelle3433
    @wademizelle3433 8 місяців тому

    Great video. Thanks

  • @jacobsargent7627
    @jacobsargent7627 4 місяці тому

    So I’m deployed over seas and there is a bobcat S130 here. Problem is the when you try and go forward and backward it will go maybe just a tad bit then bogs right out and dies.

  • @kevinalexander2888
    @kevinalexander2888 5 місяців тому

    Can you rotate the shaft of the drive motor to line up the mounting bolts?

  • @SILICONVALLEY-hc6ei
    @SILICONVALLEY-hc6ei 5 місяців тому

    My skid steer s770 stuck going forward to the right as soon as I turn it on. Seems like its stuck on one side . I unplugged the electric joysticks but still goes forward as soon as I turn it on. Any idea what it could be ? Im not getting any codes either . Ty in advance.

  • @noeturrubiates5018
    @noeturrubiates5018 5 місяців тому

    how do you remove the small line next to the hydraulic hoses

  • @irishcje1
    @irishcje1 8 місяців тому

    i got a bobcat t595 (tracks)that the parking brake is not engaging on the right side i still havent figured out why its not engaging

  • @firewoodsolutions
    @firewoodsolutions 11 місяців тому +2

    I liked it first

    • @tetradgroup
      @tetradgroup  11 місяців тому +1

      Yes you did, that was quick!

    • @jonb7470
      @jonb7470 11 місяців тому

      Great info. Ima cat dealer mechanic that works on larger stuff but I was trying to find a way to learn about the smaller stuff, and other brand stuff. This channel is a pleasant surprise.

  • @oursfort3024
    @oursfort3024 4 місяці тому

    Please french traduction