Klein Tools 32614 | 4-in-1 EDC Precision Screwdriver
Вставка
- Опубліковано 21 жов 2024
- Amazon: www.amazon.com...
Klein Website: www.kleintools...
Please Like, Subscribe, Comment & Share!
Instagram: / geared_toward_gear
Facebook: / gearedtowardgear
UA-cam: / gearedtowardgear1
Email: gearedtowardgear1@gmail.com
DISCOUNT CODES:
White Mountain Knives
10% Off Discount Code: GTG
whitemountaink...
Night Heron Leather
10% Off Code: GTG10
www.nightheron...
Cliff Original
20% Off Code: EDC20
clifforiginal.com
Companies that I endorse (they do not sponsor me or pay me in any way, I just highly recommend them from personal experience):
Cliff Original:
clifforiginal.com
DP Steel & Leather:
www.theclipsli...
Edge Of Perfection Sharpening:
www.edgeofperf...
Night Heron Leather:
www.nightheron...
Rustic EDC:
rusticedc.bigc...
Shadow Born Hanks:
/ shadow_born_hanks
Titanium Hardware:
www.ebay.com.a...
#KleinTools #Klein32614 #EDCscrewdriver
1:57 - So glad I found this video. I though the yellow part of the tool loosens first to pull that metal shaft out. I almost destroyed the tool because it wouldn't loosen, lol.
My slotted 3/32 broke the first week I had it. Expect more from Klein as I was carrying a general pocket clip flat head in my shirt that never failed. Go easy on it guys
That chancy clip is really good for keeping it from rolling away when dropped.
I got one of these a couple of years ago, and while I've been a huge Klein tool fan for years. going back to the late 70's when I was 14 and started wiring houses, this screwdriver has one huge flaw. If you apply too much downward pressure on a tight screw, the bit collapses back inside the tube. It does this on either side. They should have made positive stops on both sides.
Idk what you're talking about man. Mine doesn't do that
@@000622477 Well I must have got a bad one then. Maybe you haven't had to apply enough pressure for it to do what mine is doing.
@@deej19142 That sounds like you need to use the right tool for the job. This thing is designed for applications where the previous installer didn't give the screw the HULK treatment. 😂
@@sanders858 This has nothing to do with the right tool for the job, this screwdriver, at least the one I have is pretty much worthless. The slightest down force makes the end collapse into itself, and then you have to take it apart and retrieve it. Either I got a defective one or klien dropped the ball on this one.
@@deej19142 I think you just got a defective one, I've never had that issue with mine.
... Its nice, love from a Englander !. (ive not got any Klein products. There less know over this side of the pond. But i am consider this etc) !.
I'm buying one tomorrow I guess I have been using a cheap pen style one but the cap fell off and got lost on one side so I'm in the market for a good one
Doesnt sleeve help from screws from moving then as a protection?
Is the hex the standard 4 mm or Klien's special 3.5 mm?
Klien makes quality tools. Seems to be alot of good ideas involved in this one. I like the cover idea and the asymmetrical flip is great. Great video 👍
It’s a neat tool for sure, it’s not often something as simple as a screwdriver feels “innovative”, but this one certainly is.
I just bought one after watching this and it is a cool driver. the only negative is that Klein uses 3.5mm bits instead of 4mm and the main shaft isn't 1/4. basically you have to buy the 2 addon bits that klein offers and you are very limited. if you just want a philips/slot driver then it is great.
@@joe_ferreiraCan you provide a link for the bits you have personally purchased? And how far is it going?
Is 4.85" in the shortest form with the bit inserted? Just wondering if removing the bit would make it 11cm or under to fit into my pouch
I keep mine clipped in my jeans pocket every day. No issue with the clip
Look like I might have to pick up one for work. Thanks for the info.
You bet, thanks for watching!
Hey there! If you're looking for a versatile tool for maintaining a spotless workspace, I highly recommend the HOTO Compressed Air Capsule. It offers powerful vacuuming and blowing capabilities, perfect for cleaning your desktop, car, or even inflatables! With its efficient design and reliable features, it's definitely worth considering. Happy cleaning!
i like Klein but the middle piece wore out and i lost the piece yesterday, havent even had the thing a year and the warranty is terrible
The slide is meant to be a screw holder but it will cover the bit as well.
Would you recommend this one or the Stanley brand?
Thanks for highlighting this. Would be nice to have metric measurements...
I have one and the bits barely stay in. It’s only a matter of time before I loose them.
You find all of the best little gadgets 😂
Just call me inspector gadget.
Can it hold 1/4 bits when extended?
liked for the box cutter
Can we find a bit set for this screwdriver?
Very ingenious little tool. I have several sets of junk precision screwdrivers and every set is missing screwdrivers due to them breaking. Klein might be the solution
Hey, {{3}}! As a fellow tech enthusiast, I recommend checking out the HOTO Compressed Air Capsule. It's a versatile tool that offers powerful vacuuming and blowing capabilities. Its features, like the high suction power and swift keyboard cleaning, make it an excellent addition to any setup. Plus, it's portable and has long-lasting battery life. Definitely worth considering! Happy optimizing your tech experience! 🚀
Looks like a winner, might make a good handle for holding knife-sized T bits as you indicated.
How is this one regarding bits falling out, lots of accounts on the other style dropping bits all the time.
I like my little Klein screwdriver. Might have to get one of these at some point. Great video.
I just wish they would come with different bits.
I’ve tried the micro bits from Wiha and Wera nothing works except their own bits and they only seem to have the Philips and flat
Finds anything yet? I need a 4mm hex bit....
Is there a similar style that uses regular bits rather than the micro ones?
Man I’m still thinking about ordering the utility knife!!!!! And I have a feeling I’m going to do it because it’s written down!!!!! Lol
Peep the Olight!👌🏽
Only prob is you can't torque a screw without holding the black part of handle as the whole yellow part freely spins. The spinning grey cap which is pressed up against your palm your thumb and index finger can't spin the yellow part making it hard to work with when wiring up low voltage side of pool automation systems
This is an old video so I don't have much hope, but: anyone know a good source of additional bits for this driver? The reversible bits in the 27-in-1 apparently don't fit? This screwdriver is PERFECT for my laptop bag, but I need some additional bits that klein doesn't offer :(
I've read some owners complaining that the yellow sleeve is rotating freely and they need to hold the black rubberized grip to screw. Your unit does not do that?
The yellow sleeve is just to cover up the tip so you don't stab yourself when you put the screwdriver in your pocket. You are not supposed to use the yellow part to remove screws, because it slips on the shaft. To use the screwdriver, you use the black handle part on the end of the screwdriver, just like every other screwdriver.
@@Panotaker Of course! You did not understand the issue here. The black rubber part is very short in length and naturally your fingers end up on the yellow sleeve. I know, I finally bought one. So if you think about it it’s pretty obvious the design flaw here! As another owner said, it would have been very easy for Klein to design a notch to prevent the yellow/protector to freely rotate. It only needs to slide over the tip to protect your shirt pocket. The rotation is totally unnecessary. Note that for now the silicone O-ring is so tight that the yellow sleeve does not rotate so easily. But you cannot apply much torque (screw or unscrew a tight screw) by holding the screwdriver by the yellow sleeve that’s for sure. And the thing with the black rubberized section is that the pocket clip is almost as long. So I constantly hit the damn clip when using the screwdriver. I could easily take it off. But then who would like to use a pocket screwdriver without a pocket clip?!? Very bad ergonomics from Klein on that one.
@@mikem8145 I understand the issue just fine. It just never dawned on me to use the yellow part to turn a screw. I just naturally use the black handle, just like every other small screwdriver I have ever used. I mainly bought this screwdriver for the sliding yellow part, so it doesn't stab me when I put the tool in my pocket. Klein makes a cheaper version of this screwdriver without the yellow sliding piece. The pocket clip I took off, since I just put the screwdriver in my jeans pocket.
Pretty cool Lil driver at a good price
When applying torque, does the green bit spin around the shaft on yours? Mine did and made it essentially useless for anything tight. Aside from that and the soft bits I liked it. Had better luck with their full set of precision screwdrivers but those lack the variations you can have with this tool. I’m still looking for the perfect one. Also, loved hearing you say shaft so many times.
Hmmmm, maybe ours are different. The yellow part spins freely around the driver, but it moves independently - so the handle/shaft/bit are all in a fixed position and move together, so you basically get as much torque as your muscles will allow. The yellow piece’s ability to move freely doesn’t prevent that.
p.s. Shaft.
@@GearedTowardGear1 I guess I was using the yellow part as the handle instead of the black part so it was an issue. Maybe I’m a dumb dumb.
That's nice, have you tried a torx bit? Seems like they would disappear inside.
I have, yeah. The ones I’ve tried all worked fine, as long as it’s a standard micro torx they’ll work.
Great score Sean thanks for sharing
what pen is that/
Buen video saludos
Is there something similar for 1/4 in bits around that size?
Hey man. Not in this size, no. They’ve got some 1/4” bit drivers but they’re all quite big.
Do you have a link for that pocket knife I can't find it anywhere
Here you go! Exceed Designs TIRANT RAZOR V2 (Stonewashed) 6Al-4V Titanium Utility Knife & EDC Pocket Knife, Box Cutter, Razor Blade EDC Tool www.amazon.com/dp/B08QVWTRWL/ref=cm_sw_r_cp_api_glt_i_VSV3WA6JY62PN6ZXT2DS
@@GearedTowardGear1 That's a nice knife, but it's not $60 nice.
Amazing review, ty very much for posting, it’s much appreciated 🇺🇸🇺🇸👍👍
I need one of these with torx bits
Sweet tool!
Under 7 inches / tsa should allow you to carry on plane
oooh time for me to ask the wife if i can upgrade! nice video, ty.