I like that you stuck to standard bits. I work IT in a hospital and need to use a T20 Torx and 5/32 Hex almost daily. I created a list of tools and bits that are most useful for our techs that I share with new employees. I ordered the Steelman 10 in 1 today thanks to your videos!
I am so deep down this rabbit hole with you. I have realized that the most commonly used stuff where quality matters is worth having a dedicated tool. For me, it is pocket knife, scissors, knipex plier wrench, driver. Fill in the gaps with a multi tool. Recently tried to use my little driver with gloves on and couldnt get traction so am now looking at a new one. Great timing. Thanks
I commented a few months back but like many my EDC is constantly evolving. After looking at, and trying drivers designed specifically for EDC, folding or keychain, and even thinking outside the box and trying bike multitools, I've come to the conclusion that the best solutions are already made by established tool manufacturers. For example there's a Snap-on reversible magnet driver, about the size of a lighter, with a pocket clip. Would work with regular 2 inch bits as well as the double ended bit it's supplied with. Klein Tools make a couple of 8 in 1 variants which are a bit bigger but still smaller than the Steelman. A couple of people in the comments section have pointed out the Picquic Pic which seems pretty pocketable too. I can't get that model over here in the UK but I hadn't heard of Picquic before and I will buy one of their models for at home and more out of curiosity as don't own anything which is made in Canada. PB Swiss make a compact driver with onboard bit storage, again a bit big for the pocket but not bigger than the Steelman. I've settled on the Wera 813 handle/bit driver, about the size of a Bic lighter too so it sits nicely in the 5th pocket of my jeans. Sometimes I carry it with a couple of 2 inch bits, other times with small bits and a 2 in extender so I have the option of using it as a stubby. All of the above have better ergonomics than the pricey EDC Big Ideas Designs drivers and there are no quality concerns, they're just smaller versions of products made by reputable tool manufacturers, made in N. America or Europe. Another approach is to look for a mini ratchet which has a bit holder in the end of the handle, so it can be used as an inline driver as well. There are some made for cyclists, like the Topeak pocket rocket. I have one which is the size of a Swiss Army Knife, the Sealey mini ratchet, also branded Sabrecut. Then there is a really tiny one, about 2 inches long which was reviewed on this channel, made by the Taiwanese company 711L. The mini ratchets don't have ergonomic handles like the above examples of bit drivers but they are still better than most drivers made specifically for EDC, and you have the added feature of using the ratchet where accessibility is an issue.
Thanks for bringing all of these together in a single video! Saves a lot of legwork for the viewer. A video comparing small ratchets/ratchet kits would be welcomed.
The Victorinox bit wrench kit is amazing, carry 10 most used onboard and over 40 more in an Hamlet cigar tin, I’m committed to carrying it, it’s part of my pocket Ebike toolkit with Knipex xs, I could completely disassemble and reassemble my ebike with just those two.
I absolutely love the Milwaukee fastback. I thought that because it has plastic scales on top of a metal frame it would be cheaper than its predecessors, but I am a big fan of its design and functionality.
The plastic is surprisingly durable. Had a buddy of mine using it and dropped it about 20’ out of a lift, took it like a champ. The only bad thing that happened was I lost the bit, which wasn’t a huge deal.
Really impressed, you did a great job. Been looking to upgrade my edc tools. For me the weight of carrying edc tools is a major issue. And your attention to detail, and to give real expectations of each is greatly appreciated. Definitely looking forward to further videos.
For my daily use case, the Gerber Armbar Drive is EVERYTHING I want in a EDC multi tool. Only gripe is a lack of pliers or tweezers but those would be items I used the least anyways. When it first came out, I ordered one right away cause I never thought a tool could check all the boxes for the tool necessities plus form factor for me. Literally perfect. I’d use the Leatherman Skeletool as my main but scissors are more important for my daily use case than pliers, and the Skeletool has some heft to it.
Yeah it’s hard to beat the Milwaukee fastback 6 in 1 for the $! It’s in my work edc rotation almost every other day. Add some Shark Tooth blades makes it next level!
You are my “go-to” expert for all things techy and EDC, tool-wise. Thank you for all the effort, research, etc. you put into producing these quality videos. ☮️
Harbor Freight recently dropped a 1/4 ratcheting bit driver with a flex head. I believe its called the Icon locking flex head ratchet, or something to that sort. It also has the ability to be used as an inline bit driver and as a t-handle. Definitely recommend looking into it!
As someone who's needed an EDC utility knife I'm wishing I got the Milwaukee hybrid, for a do most things I need tool. But I went with the basic knife, because easy one handed open and close was a bigger priority than the bit driver.
That shuffle DIY knife is solid. I keep one in my "junk drawer" and that screwdriver gets used probably more than any others I have just because its conveniently located. The knife blade is short but has a big "belly" or whatever you want to call it so it still can do a lot of cutting. Mine pretty much only sees amazon packaging tape, but it works great for that too! I've seen that milwaukee knife recommended enough times that I'm definitely gonna grab one the next time I'm in HD. Seems perfect to throw in my apron.
The Kershaw Select Fire is a perfect blend between the two. It's a similar design to the Milwaukee, but with a traditional blade that's larger than the Shuffle, plus the bit storage in the Fire feels more secure than in the Shuffle. I usually keep the Kershaw in my pocket, desk, or bag, and the Milwaukee in my toolbox.
I've carried the fastback for a few years now, hands down one of my all time favorite/most used tools. Although working in IT I find the need for micro bits more than anything, really just need to pull the trigger on a fulcrum, can't decide on a size though. Great video, keep up the amazing work!
This is an excellent run down of the better options out there. Personally I've gone for the Victorinox L bar and bit set, and the mini wrench set. Both great options. Thanks for putting this video together.
Next up precision screwdriver kits? As someone who does phone repairs here and there, those come in clutch! I’ve a wallet type one that did me good for ages. Recently bought a phone repair kit the size of two of my hands, but it’s too big. Got a new one, those trending grey kits with a sliding door access to the whole kit, looks like thst pen driver. Perfect for me paired with a mini multitool and a couple plastic pry tools. I used to do repairs in school during lunchtime, now I’ve developed the rep in my college - people bring me their phones, tablets and often even laptops for me to repair any day so I need to be ready. I’m cheaper than those store repair shops because I don’t pay rent for a place. I can do it anytime anywhere as long as I have a table and dust free environment. Pretty cool side job/hobby.
I EDC milwaukee's stubby 8 in 1 ratcheting screwdriver with a 6" bit extension. its ultra durable, ratchets, and you can reach just about anywhere with it. I'ts not exactly something I would carry to the grocery store, but it can reasonably be carried in a pair of cargos, or any backpack. On the Job it works with everything in my tool bag, and the extension is super handy on a drill.
I just want a bit screwdriver version of those cylindrical hex key multitools. Key features is that the flipped out driver centers itself with the handle, the handle is more or less round, and every bit is in it's own socket, ready to go and no need to fiddle around with swapping bits.
This is a great video. A good alternative to the RUNOI bike tool is the Topeak Ratchet Rocket Lite DX. There are other variations but that one is the least bike specific. That is 100% what RUNOI based their design on for the ratcheting tool.
Awesome review of some innovative tools. 👍👍 Those 4mm wide pry tools look amazing. I was on a job many years ago where I pretty much had a Craftsman right angle mini ratchet screwdriver in my hand 8 hours a day for 9 months. I still count on that little guy for a lot of things. But I recently picked up a Topeak bike tool kit with a right angle ratchet, and that has an in-line option. That little ratchet, a 3 inch extension, and an Altoids Smalls tin full of bits all fit in my watch pocket nicely. I added a Wiha 1/4 hex to 4mm adapter to the mix, and I now have one driver for everything from 0.8mm pentalobe and 1mm flat, all the way to T25 and #3 Phillips.
Thanks so much for mentioned Fix-It Sticks. Barely anyone in the EDC community that I've seen has this tool. Most people are spending big money on the Big Idea Designs products, which are great but obviously at a different price point. I will be buying one soon!
I ended up making my own EDC screwdriver because I could not find a screwdriver on the market that fit my needs. I wanted the 4mm micro bits, and I liked the design of the Hoto, but only about half the bits included are ones I want, and they are proprietary double-ended bits so I wouldn’t be able to carry the ones I need. My goal was a full set of inch and metric hex, select torx, and Phillips/flat bits. I ended up 3D printing a design similar to the Hoto but about the length of a pen that holds 24 standard 4mm bits and takes a pen insert as well, unlike the Hoto. I’ve been very happy with it so far but still working out a few issues, and planning to share the files when I’m fully happy with it. I’m planning to add features like a metal bit holder (although the 3D print has been fine as I can heat gun it back into shape when it starts to wear out), and a way to use a lever for increased torque.
Honestly the only pocket screwdriver I ever carried was one of those old school breast pocket flatheads with the magnet on top. Still carry it at work cause the magnet controls the switch on my hydrant flow meter. Otherwise I never really thought about a pocket screwdriver until I watched some of these vids, and after I switched my Bond for a Curl I immediately missed the long reach phillips. So I picked up a Picquic "The Pic" for $7 that fits in my watch pocket beside a bic lighter.
I can't find that one in the UK unfortunately but I will probably buy a Picquic stubby for at home, seems pretty good and I like the fact it's made in Canada. I have the Wera 813 which fits in the same place besides a lighter, and it's about the same size as the lighter. Works great with 2 in bits, or a 2 in bit extender and small bits so I have the option of using it as a stubby.
I have done electrical and machine control systems for 23 years. I have EDCed a small tool kit for many years. I am one of those people that has to work on things everywhere I go. So, a medium size channel locks, a pair of Klein Wire stripper pliers, a single multi-bit screwdriver, one strait blade screw driver, a razor knife, and a tiny digital multimeter. All of it is stored in a leather belt pouch. With just a few tools, I have found that there isn't much I can't do with just those tools. My biggest problem with all of the compact mutitools is they won't survive the things I do with tools. And, I'm not spending money on disposable tools.
I'm a big fan of the Milwaukee fastback and I've been looking for a edc screwdriver. Now I know I can combine the two! Off to Home Depot in the morning!
Milwaukee fastback took me a while but I finally found one. There hasn't been a day I don't carry it, then I see your video and learn about the spare blade holder, thanks just when u think it can't get better..... lol
For me, that Milwaukee Fastback….I work in a blown film factory and we use box cutters constantly and the combination of back up box cutter and screwdriver to change the blades on a standard box cutter is incredibly handy. Also I carry a pocket kit with a dedicated pair of folding Munkees scissors… so I would love to see a video on what you like for edc scissors.
They’re definitely not expensive! But I carry a small edc kit I keep in a soft shed camera pouch and I prefer these for snipping threads, sewing and detail work than using my knife. It’s one of several handy small tools.
I like my picquic teeny turner. I bought it off the counter at a local ace for $6-8 several years back, thinking it had a handy assortment of bits and I still use it all the time! Bits have all held up very well, including the t6 and are actually if surprisingly good quality. Just a fairly standard little stubby driver with 6 bits stored in the handle plus one in the driver. Would definitely recommend! They seem to offer them with a variety of different bit configurations.
Great options I cared the seelmen for awhile but replaced it with the Gerber Armbar slim. Wasn’t a big fan of the full version but that slim has worked out great for the last 5 months simple working blade, bottle opener and driver
Love seeing these new videos that explain options for commonly used and needed EDC items. Maybe a follow up screwdriver video that is all proprietary? Wiha, double ended, etc. If there is enough to make a whole video.
Awesome video. 711L Lollipop is the best I've ever seen. No bit storage, but it has a spinning top like the Hoto 24 which allows it to be used like an in line ratchet. In addition, the top pulls out into an L handle for torque like the Fixitsticks.
I'm personally a big fan of the Victorinox bit set with the L shaped bit wrench. It's such a simple design, but just works. I've tried the ratcheting version that Victorinox also offers, but I much prefer the L wrench instead.
As an electrician that does strictly remodels this is an absolute essential tool. ua-cam.com/users/postUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI Being able to precision cut any material with a light weight tool is priceless.I upgraded to this Dewalt 20v from a competitor's 12v. The Dewalt 20v is just as light as the competitor's 12v. I am extremely pleased with the overall performance and battery life of this tool. As far as oscillators go, they just aren't very ergonomic tools. The dewalt oscillators have an offset handle that do make them somewhat more ergonomic than the competitors' oscillators.
This is a high quality video!!! I know you won’t see this and probably already have a video on this, but i would l like to see a video about the “mini multi tools”. Like I’d really like to have a customized half of a Leatherman. Lol. Essentially different versions of the CRKT Armbar.
Been using the Work Sharp Micro for quite a while now and so far, it's been performing very well. It's like the bare bones tool you need to keep your dedicated knife in top shape anywhere and anytime.
I fix air conditioners for a living, and carry the fastback with the Leatherman ratchet extension and a couple of nut driver bits in my pocket. If the battery dies on my drill gun, the fastback is all you need.
I have been carrying the Country Comm driver for years now. I also carry the County Comm titanium adjustable wrench. It allows me to put a bit more torque on the screws of the driver. I don't recommend doing it often since who knows how much abuse the clip screws can take, but when it's needed, it works great. My only complaint is that the 6in titanium wrench is loose. I'm not really a fan of it, to be honest but it's the lightest for it's price. I'm doing my best to cut down on weight since I bike everywhere and I like to carry *mostly* full sized tools. There's a titanium multi tool/worm drive wrench I want to get soon to replace the CC wrench if it's less loose.
This was a Great video -- It's rare to actually learn about things I never knew existed... congratulations! Suggestions for next video would include tools that include both a light and a pen ... those certainly fall within my edc carry along with a cutting edge and some tool capability (screwdriver/pliers/and pull bar). Again, good job, you'se set the bar rather high and I'm expecting a lot in future videos. Now I have to go out and get some of these toys!
All those multi has its own tasks & purpose. I use the bicycle kit for my edc. Almost similar to the Milwaukee I also use a Coleman. Multitool is basically legal to carry in Australia. Cheers mate.
For me definetly HOTO 24in1 because as a leatherman guy i have set of leatherman bit and this is great addition to that! Actually before i finished this video i already ordered one because the price is also good!
Love the HOTO Liked Both the Fixitsticks Pro & the one that Swiss Army Knife made ... If there is such a thing Scissors/ tin snips -- something that can make precision cuts in soft stuff Like a good pair of scissors BUT is strong enough to cut through metal
Teale Designs is one cool dude. I have three pry bars from him. He will do custom upgrades if they are within reason. Great maker. Glad to see you showing some of his work. Thanks as always 👍.
would like for you to make a video that shows us people that do not know how to take apart the multi tools how to do so. loved watching you videos on what you did with those.
Many of these have been out of stock for a long time. :/ The two Rujoi sets, the FixItSticks, the WorkSharp Mini. I got the FixItSticks, Rujoi driver, Milwaukee Fastback, all are just excellent. I'll get the HOTO too. It has a permanent %35 off coupon in Amazon. And the Worksharp Mini. Too good not to have. For edc, I also like the PB Swiss stubby bit driver with bit storage, and MichaelPro ratcheting stubby bit driver with bit storage. I also got the SATA 11 in 1, it is kinda like the Victorinox you showed. But it is very heavy and slippery, so not that great.
I've simply decided to take a Sealey brand 1/4" micro ratchet and Bahco T-handle bit driver with a Dewalt 32 piece bit set. Covers all my bases alongside a decent multi tool and doesn't take up much space at all regardless of my needs - either torque or precision.
Nice video man ! I bought the Bit Bar inline on Kickstater when theny came with it ! Such a cool edc tool ! I bought the Steelman cause of you ahaha ! 🤟
That 1/4" to 1/4" bit on the second screwdriver that you showed is usually able to be slid over the1/4" flat head screwdriver bit on most multi tools allowing you to carry that adapter with Bits in the sheath!
Whoe I just looked up like basically every option and had a lot of that same thoughts. I settled on fixit sticks. I needed standard bits and very small and pocketable. It’s crazy how hard to find that combo is in the sense that there should be a ton of cheap options but it’s mostly obscure or boutique things. I also have a custom driver made by machindedbyhand on Etsy that I like a lot as well as an extra cylinder for more bits. More options worth mentioning that didn’t make the video: the super small wera (I think it’s the 843?), mininch tool pen, Wheeler Multi-Driver Tool Pen, James brand cache River, bitzblade, Silca T-ratchet, wolftooth driver, mecarmy SGD1, CRKT pocket driver, CRKT driver roll, screwpop, sabercut mini driver, laser tools 8244, eos screwblaster, Titan 16091, dowl-it aluminum driver handle, gerber ambar slim, vital carry bolt action driver. A plot if folks seem to mention the “ring doorbell screwdriver” a lot for edc as well. There were a few others I saw when searching around but I forgot to bookmark them. I keep the ambar slim on the coin pocket of my pants and it’s the fist thing I reach for. If the issue needs something else I grab the fixitsticks. Because of what I do for work I keep lots of bits on me, so I usually have 3 pill containers with torx, hex, and precision bits with 1/4” shafts but it’s worth noting there is a 1/4” to 4mm adapter that is nice to have if you want one driver but a mix of precision and standard bits. There’s also a lot of fixit sticks ratcheting clones popping up for about $20. I bought a couple of them and they seem to work great. They generally come in a kit with a ratchet, 3 extensions, and 24 bits. I have the “ker 30-in-one” and “KBCSUN 24-in-1 ratcheting precision screw driver” but the shank size is standard 1/4. The Ker seems more heavy duty but you have to flip to the other hex insert side for forward and reverse, and might be prone to rust, the kbcsun (also branded by limoruns) is aluminum and a single side insert with a lever for changing directions.
I have been on a quest for EDC scewdrivers for a while. I've been using the fixit sticks and they are excellent. Got the countycomm en route and i hope it will work out well
understood, just keep in mind you are a small part of that base..and I try my best to make the best overall decisions. All your suggesting is that I give ppl less notice..why would that makes sense?
It also helps content makers who don't post on a "Every Tuesday at 11am". Setting up a premier helps them generate a buzz before the video hits. Channels like Project Farm that drop every Sunday gets that built in "anticipation" on Saturday, but this channel doesn't adhere to a scheduled release.
Very good video! To answer your final question I'd like to see more about edc scissors because I'm still searching for a good one approx 10cm in length. Cheers from Germany!
I own and enjoy the Kershaw 1920 select fire multi tool pocket knife. It's very similar to the DIY shuffle except it is a full size pocket knife it carries 4 different standard bits and the bit driver extends. It's a really nice tool but you don't hear people talk about them much. I've heard about the shuffle DIY from several different EDC reviewers but never the Kershaw select fire multi tool. It comes in 2 different colors that are also the blade design. The blue handle version the blade is part serrated and the black handle version is full non serrated blade. They're pretty cheap online also almost the same cost as the DIY shuffle, the shuffle is a little less but not by much. So if you like the shuffle but want it to be a full size pocket/folding knife than go with the Kershaw 1920 select fire
I decided to check Amazon for prices. The DIY shuffle is about $28 and the select fire is about $10 more for a cost of $39.80. There's a different multi tool that appears to be the exact same as the select fire made/sold by a company called OEMtools that costs$20 or $19.98 to be exact. Everything appears to be the exact same from the Kershaw select fire to the OEMtools version except that the OEM model is a bright HI VIS Neon/Zombie green. Since the Kershaw select fire is outsourced and made in China I bet that the OEMtools is the company that makes the Kershaw select fire and just changed the handle colors so they can sell it directly instead of going through Kershaw
I also have and love the Select Fire. The only complaint I've ever heard is that it's a little oversized, but I have large hands so it feels very comfortable to me.
to be honest, i never understant the botle oppener feature because a real man, if he's having a solid piece of metal in the hand than the beer it is already open. One of is are using just a chep firelightner....
My Fixit Sticks came. My set holds 18 bits. The two ends of the rubber holder have slots, so there is a bit in each end. Great bit of kit. Thanks for the recommendation.
Thank you for showing these and for adding a list. You have helped me extensively, for I have just begun my EDC small tool collection. I am looking forward to your reviews. And I will certainly be looking back at your other postings since I have only now found you. This is a very informative video!!
Nice selection of tools. I probably use the cheap, belkin credit card sized bit kit that I picked up in the impulse aisle at microcenter 20+ years ago the most out of any of my bit sets. It has 6 universal bits and an extender
Link to "Novel Carry Slideclick" is giving me a "403 Forbidden" error page. "Bolt EDC Tool" I believe is no longer in business. Great resource...Thank you for your hard work👍. Kudos from NYC🗽.
So thankful you have all these to discuss. I feel like multitool screwdrivers are the most challenging to discover and to pick among everything. I wanted something effective but small but I also wanted it to look beautiful/aesthetic. Was debating between the Bit Bar Inline, Wera 813R, Big Idea EDS 2 and Im' still not sure what to choose.
I've had a cybertool since they came out. If only the screwdriver was centered! I've looked for an edc screwdriver that could replace it. These are great options.
Great video, the precision drivers and utility knife in this video are what I didn't know I needed. So far the EDC tool that I've used the most is my Gerber dime. I've been laugh at by having it, but of all the tools I have, is the one that I've used the most and has helped me in dire situations as well.
Honestly if they made a Gerber Dime with Big Idea Design quality - but basically had the same size and parts - but better versions I'd totally buy it. The Gerber Dime is so portable in its size and in theory had the most useful tools (not in its actual usecase but the actual tools they were trying to provide). I just found that the parts were so hard to come out and didn't work as well. If it was like Victorinox quality but that size and look it'd be perfect. In many ways it's like the perfect size, the most useful tools (in theory) but just not executed correctly. TLDR if it actually had good tweezers (and weren't useless), if the scissors (were Victorionox quality), the bottle opener (is good), if the knife (came out easier and was more sleek), if the screw drivers were more better designed, if the pliers were like Knipex Cobra XS, etc. One can only dream. I'd have bought it and would pay a premium for them.
Ha! The Runoi is also the Power Torque Bit Ratchet, too. Very cool and glad it made in the video, as it's size is awesome and it's strength is awesomer. I also really like that HOTO... thanks for introducing me to it.
That one, the power torque, the Topeak, VIM, Toptul, Mac, Facom, USAG, Blackhawk, WURTH , Dean, KS Tool, and many many more of these thumb wheel bit ratchets marked REVERSE GEAR are all made by HI-FIVE in Taiwan. I'm trying to find a good affordable source for the Toptul CHEV 0811 here in the US. I have the Vim locking flex head that KS Tool and WURTH also offer, but it turned out to be longer. The Toptul CHEV 0811 is shorter and more like a flex head version of the GM power torque that I keep in my leatherman accessory pocket sheath next to my Leatherman Bond.
I love the Maxcraft! I’ve been looking for something with traditional screw drivers (slotted and Phillips) because I don’t seem to need Torx and other specialty drivers. My pair of small Swiss Army knives gives me small and large drivers, but obviously can’t take those on a plane. The Maxcraft is a little bulky, but it’s lightweight When does just what I wanted at all to do and nothing more. Great find!
Great video! I carry the Milwaukee fastback on occasion and it is really good. For my EDC I usually carry a leatherman bit kit and a tool that works with them (leatherman skeletool, gerber armbar, etc.) Would love to see a video on edc wrench options. I carry a leatherman piranha 2 but always looking out for cool options and ideas. in this area.
@@maxlvledc sure did and it was another good one. The cobra pliers are on the short list of my next purchase and I have a Boker tech tool city 5. I was thinking more like multi tool wrenches similar to the piranha 2, tpt slide, and the wrench/pry bar I’ve seen you post in the past. Something thin/flat with a step down system that could maybe fit in a sheath behind a multitool.
@@hardcore9erfan . I carry the Milwaukee 5-1 daily and carry extra bits in a tin and I also carry the cobra xs pliers . With a Craftsman ratchet bit driver . And rite rain polka pen. All in chums wallet . Works great Mr maxedc has see this set his words was that's a lot of stuff. A hole set of metric Allen bits and torx and Phillips 1,2,3. Large flat heads and 2 Robbie .
Victorinox bit wrench, I edc this and it gets used almost daily, I keep a small tin of extra bits in a hamlet miniature cigar tin, it’s only slightly thicker than 1/4”, I’ve glued some thin liner material to silence the rattle, you can store over 40 bits, 50 if you count the 10 on the tool. Wrap some gorilla tape round the shaft for additional grip, you can never have to much gorilla tape…
I really enjoyed this video and found the info really useful. Just commenting to give a little algorithmic boost as my way of thanking you for the effort of making and posting your thoughts on these items. Thanks.
Didn't think I'd wake up owning 5 new screwdrivers...
Hahaha! Payback!!! Your always enabling me...this time I win!!!
Can you do videos on android edc? I'm tired of you on apples nuts.
I know right.... how did those babies got here?... ah well
Only 5?
I like that you stuck to standard bits. I work IT in a hospital and need to use a T20 Torx and 5/32 Hex almost daily. I created a list of tools and bits that are most useful for our techs that I share with new employees. I ordered the Steelman 10 in 1 today thanks to your videos!
I am so deep down this rabbit hole with you. I have realized that the most commonly used stuff where quality matters is worth having a dedicated tool. For me, it is pocket knife, scissors, knipex plier wrench, driver. Fill in the gaps with a multi tool. Recently tried to use my little driver with gloves on and couldnt get traction so am now looking at a new one. Great timing. Thanks
Glad I could help
glad I'm not the only one that geeks out on this stuff....
best pocket tools: Viktorinox Hunter XT, Gerber Center Drive, Leatherman Raptor
@@rolandreichenbach2909 solid
@@maxlvledc yup
I commented a few months back but like many my EDC is constantly evolving. After looking at, and trying drivers designed specifically for EDC, folding or keychain, and even thinking outside the box and trying bike multitools, I've come to the conclusion that the best solutions are already made by established tool manufacturers.
For example there's a Snap-on reversible magnet driver, about the size of a lighter, with a pocket clip. Would work with regular 2 inch bits as well as the double ended bit it's supplied with. Klein Tools make a couple of 8 in 1 variants which are a bit bigger but still smaller than the Steelman. A couple of people in the comments section have pointed out the Picquic Pic which seems pretty pocketable too. I can't get that model over here in the UK but I hadn't heard of Picquic before and I will buy one of their models for at home and more out of curiosity as don't own anything which is made in Canada.
PB Swiss make a compact driver with onboard bit storage, again a bit big for the pocket but not bigger than the Steelman.
I've settled on the Wera 813 handle/bit driver, about the size of a Bic lighter too so it sits nicely in the 5th pocket of my jeans. Sometimes I carry it with a couple of 2 inch bits, other times with small bits and a 2 in extender so I have the option of using it as a stubby.
All of the above have better ergonomics than the pricey EDC Big Ideas Designs drivers and there are no quality concerns, they're just smaller versions of products made by reputable tool manufacturers, made in N. America or Europe.
Another approach is to look for a mini ratchet which has a bit holder in the end of the handle, so it can be used as an inline driver as well. There are some made for cyclists, like the Topeak pocket rocket. I have one which is the size of a Swiss Army Knife, the Sealey mini ratchet, also branded Sabrecut. Then there is a really tiny one, about 2 inches long which was reviewed on this channel, made by the Taiwanese company 711L.
The mini ratchets don't have ergonomic handles like the above examples of bit drivers but they are still better than most drivers made specifically for EDC, and you have the added feature of using the ratchet where accessibility is an issue.
Thanks for bringing all of these together in a single video! Saves a lot of legwork for the viewer.
A video comparing small ratchets/ratchet kits would be welcomed.
I'd love to...but that would be a crazy expensive video hehe
The Victorinox bit wrench kit is amazing, carry 10 most used onboard and over 40 more in an Hamlet cigar tin, I’m committed to carrying it, it’s part of my pocket Ebike toolkit with Knipex xs, I could completely disassemble and reassemble my ebike with just those two.
I absolutely love the Milwaukee fastback. I thought that because it has plastic scales on top of a metal frame it would be cheaper than its predecessors, but I am a big fan of its design and functionality.
The plastic is surprisingly durable. Had a buddy of mine using it and dropped it about 20’ out of a lift, took it like a champ. The only bad thing that happened was I lost the bit, which wasn’t a huge deal.
Really impressed, you did a great job. Been looking to upgrade my edc tools. For me the weight of carrying edc tools is a major issue. And your attention to detail, and to give real expectations of each is greatly appreciated. Definitely looking forward to further videos.
Got the Hoto 24 bits because of this video. It is an amazing tool. I Carry it everyday with a 4mm ifixit PH2 bit already install. So 25 in 1
For my daily use case, the Gerber Armbar Drive is EVERYTHING I want in a EDC multi tool. Only gripe is a lack of pliers or tweezers but those would be items I used the least anyways. When it first came out, I ordered one right away cause I never thought a tool could check all the boxes for the tool necessities plus form factor for me. Literally perfect. I’d use the Leatherman Skeletool as my main but scissors are more important for my daily use case than pliers, and the Skeletool has some heft to it.
the armbar drive not having locking awl...locking driver..and the poor scissor performace...yea I can't get around those things personally.
Yeah it’s hard to beat the Milwaukee fastback 6 in 1 for the $! It’s in my work edc rotation almost every other day. Add some Shark Tooth blades makes it next level!
Op
So it's your eodc.
You are my “go-to” expert for all things techy and EDC, tool-wise. Thank you for all the effort, research, etc. you put into producing these quality videos. ☮️
Your welcome! Glad I can help
Really a great video for screwdriver lovers! I like most that you choose only standard 1/4” and 4mm bits tools! Wonderful job!
Harbor Freight recently dropped a 1/4 ratcheting bit driver with a flex head. I believe its called the Icon locking flex head ratchet, or something to that sort. It also has the ability to be used as an inline bit driver and as a t-handle. Definitely recommend looking into it!
I will have to check it out at some point.
I am waiting for it to be in stock at my nearest HF or for me to be able to go to the next nearest where it is in stock.
Yeah $45 for a crappy made harbor freight tool yeah that's a great buy all right What a joke
As someone who's needed an EDC utility knife I'm wishing I got the Milwaukee hybrid, for a do most things I need tool. But I went with the basic knife, because easy one handed open and close was a bigger priority than the bit driver.
That shuffle DIY knife is solid. I keep one in my "junk drawer" and that screwdriver gets used probably more than any others I have just because its conveniently located. The knife blade is short but has a big "belly" or whatever you want to call it so it still can do a lot of cutting. Mine pretty much only sees amazon packaging tape, but it works great for that too!
I've seen that milwaukee knife recommended enough times that I'm definitely gonna grab one the next time I'm in HD. Seems perfect to throw in my apron.
The Kershaw Select Fire is a perfect blend between the two. It's a similar design to the Milwaukee, but with a traditional blade that's larger than the Shuffle, plus the bit storage in the Fire feels more secure than in the Shuffle. I usually keep the Kershaw in my pocket, desk, or bag, and the Milwaukee in my toolbox.
I've carried the fastback for a few years now, hands down one of my all time favorite/most used tools. Although working in IT I find the need for micro bits more than anything, really just need to pull the trigger on a fulcrum, can't decide on a size though. Great video, keep up the amazing work!
The full sized Fulcrum is the best by far...if you want a shorter one...I suggest the Novel Carry Slideclick
Maybe try a victorinox cyber tool
This is an excellent run down of the better options out there.
Personally I've gone for the Victorinox L bar and bit set, and the mini wrench set. Both great options.
Thanks for putting this video together.
I've carried the titanium bit bar for like 2 years straight. It is an essential part of my edc.
Next up precision screwdriver kits? As someone who does phone repairs here and there, those come in clutch! I’ve a wallet type one that did me good for ages. Recently bought a phone repair kit the size of two of my hands, but it’s too big. Got a new one, those trending grey kits with a sliding door access to the whole kit, looks like thst pen driver. Perfect for me paired with a mini multitool and a couple plastic pry tools. I used to do repairs in school during lunchtime, now I’ve developed the rep in my college - people bring me their phones, tablets and often even laptops for me to repair any day so I need to be ready. I’m cheaper than those store repair shops because I don’t pay rent for a place. I can do it anytime anywhere as long as I have a table and dust free environment. Pretty cool side job/hobby.
Literally the coolest video I’ve watched, can’t wait to see what else you have
As a refrigeration technician. The 5/16 nut driver is an absolute must. 
Yeah! I see that Kershaw Shuffle DIY! I love the whole Shuffle family.... All 3. They've been my sole EDC knife for years.
I EDC milwaukee's stubby 8 in 1 ratcheting screwdriver with a 6" bit extension. its ultra durable, ratchets, and you can reach just about anywhere with it. I'ts not exactly something I would carry to the grocery store, but it can reasonably be carried in a pair of cargos, or any backpack. On the Job it works with everything in my tool bag, and the extension is super handy on a drill.
I just want a bit screwdriver version of those cylindrical hex key multitools. Key features is that the flipped out driver centers itself with the handle, the handle is more or less round, and every bit is in it's own socket, ready to go and no need to fiddle around with swapping bits.
This is a great video. A good alternative to the RUNOI bike tool is the Topeak Ratchet Rocket Lite DX. There are other variations but that one is the least bike specific. That is 100% what RUNOI based their design on for the ratcheting tool.
Awesome review of some innovative tools. 👍👍 Those 4mm wide pry tools look amazing.
I was on a job many years ago where I pretty much had a Craftsman right angle mini ratchet screwdriver in my hand 8 hours a day for 9 months. I still count on that little guy for a lot of things. But I recently picked up a Topeak bike tool kit with a right angle ratchet, and that has an in-line option. That little ratchet, a 3 inch extension, and an Altoids Smalls tin full of bits all fit in my watch pocket nicely. I added a Wiha 1/4 hex to 4mm adapter to the mix, and I now have one driver for everything from 0.8mm pentalobe and 1mm flat, all the way to T25 and #3 Phillips.
Thanks so much for mentioned Fix-It Sticks. Barely anyone in the EDC community that I've seen has this tool. Most people are spending big money on the Big Idea Designs products, which are great but obviously at a different price point. I will be buying one soon!
I ended up making my own EDC screwdriver because I could not find a screwdriver on the market that fit my needs. I wanted the 4mm micro bits, and I liked the design of the Hoto, but only about half the bits included are ones I want, and they are proprietary double-ended bits so I wouldn’t be able to carry the ones I need. My goal was a full set of inch and metric hex, select torx, and Phillips/flat bits. I ended up 3D printing a design similar to the Hoto but about the length of a pen that holds 24 standard 4mm bits and takes a pen insert as well, unlike the Hoto. I’ve been very happy with it so far but still working out a few issues, and planning to share the files when I’m fully happy with it. I’m planning to add features like a metal bit holder (although the 3D print has been fine as I can heat gun it back into shape when it starts to wear out), and a way to use a lever for increased torque.
Honestly the only pocket screwdriver I ever carried was one of those old school breast pocket flatheads with the magnet on top. Still carry it at work cause the magnet controls the switch on my hydrant flow meter.
Otherwise I never really thought about a pocket screwdriver until I watched some of these vids, and after I switched my Bond for a Curl I immediately missed the long reach phillips. So I picked up a Picquic "The Pic" for $7 that fits in my watch pocket beside a bic lighter.
I can't find that one in the UK unfortunately but I will probably buy a Picquic stubby for at home, seems pretty good and I like the fact it's made in Canada. I have the Wera 813 which fits in the same place besides a lighter, and it's about the same size as the lighter. Works great with 2 in bits, or a 2 in bit extender and small bits so I have the option of using it as a stubby.
I have done electrical and machine control systems for 23 years. I have EDCed a small tool kit for many years. I am one of those people that has to work on things everywhere I go. So, a medium size channel locks, a pair of Klein Wire stripper pliers, a single multi-bit screwdriver, one strait blade screw driver, a razor knife, and a tiny digital multimeter. All of it is stored in a leather belt pouch. With just a few tools, I have found that there isn't much I can't do with just those tools.
My biggest problem with all of the compact mutitools is they won't survive the things I do with tools. And, I'm not spending money on disposable tools.
I'm a big fan of the Milwaukee fastback and I've been looking for a edc screwdriver. Now I know I can combine the two! Off to Home Depot in the morning!
Milwaukee fastback took me a while but I finally found one. There hasn't been a day I don't carry it, then I see your video and learn about the spare blade holder, thanks just when u think it can't get better..... lol
For me, that Milwaukee Fastback….I work in a blown film factory and we use box cutters constantly and the combination of back up box cutter and screwdriver to change the blades on a standard box cutter is incredibly handy. Also I carry a pocket kit with a dedicated pair of folding Munkees scissors… so I would love to see a video on what you like for edc scissors.
Can u link the scissors?
They’re definitely not expensive! But I carry a small edc kit I keep in a soft shed camera pouch and I prefer these for snipping threads, sewing and detail work than using my knife. It’s one of several handy small tools.
For me the Best edc screwdriver is victorinox small Sak. Newsletter for example. It is TSA proof as well. My favorite.
The Jetsetter is awesome I agree
I like my picquic teeny turner. I bought it off the counter at a local ace for $6-8 several years back, thinking it had a handy assortment of bits and I still use it all the time! Bits have all held up very well, including the t6 and are actually if surprisingly good quality. Just a fairly standard little stubby driver with 6 bits stored in the handle plus one in the driver. Would definitely recommend! They seem to offer them with a variety of different bit configurations.
Great options I cared the seelmen for awhile but replaced it with the Gerber Armbar slim. Wasn’t a big fan of the full version but that slim has worked out great for the last 5 months simple working blade, bottle opener and driver
Love seeing these new videos that explain options for commonly used and needed EDC items.
Maybe a follow up screwdriver video that is all proprietary? Wiha, double ended, etc. If there is enough to make a whole video.
I need to cover other categories before I come back around imo
the ratchet version of victorniox with bitexternder is my all time fav, 100%
Awesome video. 711L Lollipop is the best I've ever seen. No bit storage, but it has a spinning top like the Hoto 24 which allows it to be used like an in line ratchet. In addition, the top pulls out into an L handle for torque like the Fixitsticks.
I'm personally a big fan of the Victorinox bit set with the L shaped bit wrench. It's such a simple design, but just works. I've tried the ratcheting version that Victorinox also offers, but I much prefer the L wrench instead.
I just ordered one. Seemed best quality and size. The titanium ones were exciting but I don’t need exciting. I need efficiency.
As an electrician that does strictly remodels this is an absolute essential tool. ua-cam.com/users/postUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI Being able to precision cut any material with a light weight tool is priceless.I upgraded to this Dewalt 20v from a competitor's 12v. The Dewalt 20v is just as light as the competitor's 12v. I am extremely pleased with the overall performance and battery life of this tool. As far as oscillators go, they just aren't very ergonomic tools. The dewalt oscillators have an offset handle that do make them somewhat more ergonomic than the competitors' oscillators.
This is a high quality video!!! I know you won’t see this and probably already have a video on this, but i would l like to see a video about the “mini multi tools”. Like I’d really like to have a customized half of a Leatherman. Lol. Essentially different versions of the CRKT Armbar.
Man! That Kershaw!!!
Simple, very pocketable and with a real blade
Been using the Work Sharp Micro for quite a while now and so far, it's been performing very well. It's like the bare bones tool you need to keep your dedicated knife in top shape anywhere and anytime.
This is so entertaining to watch even if I don't know what edc means lol.
EDC = every day carry
when you said the Maratac Ti Pen Driver V2 was only 25 bucks i went and bought it lol wasnt really looking for a pocket screwdriver yet here we are
Haha, enabling goals.
I fix air conditioners for a living, and carry the fastback with the Leatherman ratchet extension and a couple of nut driver bits in my pocket. If the battery dies on my drill gun, the fastback is all you need.
I have been carrying the Country Comm driver for years now.
I also carry the County Comm titanium adjustable wrench. It allows me to put a bit more torque on the screws of the driver. I don't recommend doing it often since who knows how much abuse the clip screws can take, but when it's needed, it works great.
My only complaint is that the 6in titanium wrench is loose. I'm not really a fan of it, to be honest but it's the lightest for it's price. I'm doing my best to cut down on weight since I bike everywhere and I like to carry *mostly* full sized tools.
There's a titanium multi tool/worm drive wrench I want to get soon to replace the CC wrench if it's less loose.
This was a Great video -- It's rare to actually learn about things I never knew existed... congratulations!
Suggestions for next video would include tools that include both a light and a pen ... those certainly fall within my edc carry along with a cutting edge and some tool capability (screwdriver/pliers/and pull bar). Again, good job, you'se set the bar rather high and I'm expecting a lot in future videos. Now I have to go out and get some of these toys!
All those multi has its own tasks & purpose. I use the bicycle kit for my edc. Almost similar to the Milwaukee I also use a Coleman. Multitool is basically legal to carry in Australia. Cheers mate.
I picked up a two pack Milwaukee fastback the 1500 and 1505. Great little utility knives.
For me definetly HOTO 24in1 because as a leatherman guy i have set of leatherman bit and this is great addition to that! Actually before i finished this video i already ordered one because the price is also good!
Another solid video man. You are growing on me video by video keep it up! 👊🏼
HOTO P1 24-in-1! That made me click the like button immediately
Love the HOTO
Liked Both the Fixitsticks Pro & the one that Swiss Army Knife made
...
If there is such a thing Scissors/ tin snips -- something that can make precision cuts in soft stuff Like a good pair of scissors BUT is strong enough to cut through metal
Teale Designs is one cool dude. I have three pry bars from him. He will do custom upgrades if they are within reason. Great maker. Glad to see you showing some of his work. Thanks as always 👍.
would like for you to make a video that shows us people that do not know how to take apart the multi tools how to do so. loved watching you videos on what you did with those.
I had a series on the wave I still need to finish...which one in particular are you asking about?
@@maxlvledc the multifofce from mossy oak or ozark trail, or just to show how the majority of those are put together so we can customize
I liked the Victronix, Kershaw & that worx sharpener life tool is slick 👍🏼👍🏼😎
Milwaukee fastback is my go to screwdriver, and I usually carry a leatherman on me as well. It’s such a great design.
Many of these have been out of stock for a long time. :/
The two Rujoi sets, the FixItSticks, the WorkSharp Mini. I got the FixItSticks, Rujoi driver, Milwaukee Fastback, all are just excellent. I'll get the HOTO too. It has a permanent %35 off coupon in Amazon. And the Worksharp Mini. Too good not to have.
For edc, I also like the PB Swiss stubby bit driver with bit storage, and MichaelPro ratcheting stubby bit driver with bit storage. I also got the SATA 11 in 1, it is kinda like the Victorinox you showed. But it is very heavy and slippery, so not that great.
That blue Hoto was it & that last prybar combo 👍🏼👍🏼, EDC sissors could be nice 😎🇺🇸🤙🏼
I've simply decided to take a Sealey brand 1/4" micro ratchet and Bahco T-handle bit driver with a Dewalt 32 piece bit set. Covers all my bases alongside a decent multi tool and doesn't take up much space at all regardless of my needs - either torque or precision.
Nice video man ! I bought the Bit Bar inline on Kickstater when theny came with it ! Such a cool edc tool ! I bought the Steelman cause of you ahaha ! 🤟
Fabulous!! Now to make my shopping list!!
That 1/4" to 1/4" bit on the second screwdriver that you showed is usually able to be slid over the1/4" flat head screwdriver bit on most multi tools allowing you to carry that adapter with Bits in the sheath!
I really liked the Irwin folding utility knife with blade and bit storage.
Whoe I just looked up like basically every option and had a lot of that same thoughts. I settled on fixit sticks. I needed standard bits and very small and pocketable. It’s crazy how hard to find that combo is in the sense that there should be a ton of cheap options but it’s mostly obscure or boutique things. I also have a custom driver made by machindedbyhand on Etsy that I like a lot as well as an extra cylinder for more bits. More options worth mentioning that didn’t make the video: the super small wera (I think it’s the 843?), mininch tool pen, Wheeler Multi-Driver Tool Pen, James brand cache River, bitzblade, Silca T-ratchet, wolftooth driver, mecarmy SGD1, CRKT pocket driver, CRKT driver roll, screwpop, sabercut mini driver, laser tools 8244, eos screwblaster, Titan 16091, dowl-it aluminum driver handle, gerber ambar slim, vital carry bolt action driver. A plot if folks seem to mention the “ring doorbell screwdriver” a lot for edc as well.
There were a few others I saw when searching around but I forgot to bookmark them. I keep the ambar slim on the coin pocket of my pants and it’s the fist thing I reach for. If the issue needs something else I grab the fixitsticks. Because of what I do for work I keep lots of bits on me, so I usually have 3 pill containers with torx, hex, and precision bits with 1/4” shafts but it’s worth noting there is a 1/4” to 4mm adapter that is nice to have if you want one driver but a mix of precision and standard bits. There’s also a lot of fixit sticks ratcheting clones popping up for about $20. I bought a couple of them and they seem to work great. They generally come in a kit with a ratchet, 3 extensions, and 24 bits. I have the “ker 30-in-one” and “KBCSUN 24-in-1 ratcheting precision screw driver” but the shank size is standard 1/4. The Ker seems more heavy duty but you have to flip to the other hex insert side for forward and reverse, and might be prone to rust, the kbcsun (also branded by limoruns) is aluminum and a single side insert with a lever for changing directions.
I have been on a quest for EDC scewdrivers for a while. I've been using the fixit sticks and they are excellent. Got the countycomm en route and i hope it will work out well
Can you believe I had to look up what EDC was. I had a frantic 30 seconds to find it just means EveryDay Carry,
I’m a fan.
I don’t need a 48 hour notice.
Please listen to the people that will watch your vids.
understood, just keep in mind you are a small part of that base..and I try my best to make the best overall decisions. All your suggesting is that I give ppl less notice..why would that makes sense?
It also helps content makers who don't post on a "Every Tuesday at 11am". Setting up a premier helps them generate a buzz before the video hits.
Channels like Project Farm that drop every Sunday gets that built in "anticipation" on Saturday, but this channel doesn't adhere to a scheduled release.
I like this and quite a collection I love EDC gadgets.
Very good video!
To answer your final question I'd like to see more about edc scissors because I'm still searching for a good one approx 10cm in length.
Cheers from Germany!
I own and enjoy the Kershaw 1920 select fire multi tool pocket knife. It's very similar to the DIY shuffle except it is a full size pocket knife it carries 4 different standard bits and the bit driver extends. It's a really nice tool but you don't hear people talk about them much. I've heard about the shuffle DIY from several different EDC reviewers but never the Kershaw select fire multi tool. It comes in 2 different colors that are also the blade design. The blue handle version the blade is part serrated and the black handle version is full non serrated blade. They're pretty cheap online also almost the same cost as the DIY shuffle, the shuffle is a little less but not by much. So if you like the shuffle but want it to be a full size pocket/folding knife than go with the Kershaw 1920 select fire
I decided to check Amazon for prices. The DIY shuffle is about $28 and the select fire is about $10 more for a cost of $39.80.
There's a different multi tool that appears to be the exact same as the select fire made/sold by a company called OEMtools that costs$20 or $19.98 to be exact. Everything appears to be the exact same from the Kershaw select fire to the OEMtools version except that the OEM model is a bright HI VIS Neon/Zombie green. Since the Kershaw select fire is outsourced and made in China I bet that the OEMtools is the company that makes the Kershaw select fire and just changed the handle colors so they can sell it directly instead of going through Kershaw
I also have and love the Select Fire. The only complaint I've ever heard is that it's a little oversized, but I have large hands so it feels very comfortable to me.
Wow forgot the name of the blue tool was my favorite along that larger V tool 👍🏼👍🏼 thx 😎
to be honest, i never understant the botle oppener feature because a real man, if he's having a solid piece of metal in the hand than the beer it is already open. One of is are using just a chep firelightner....
It's a cost cutting feature
My Fixit Sticks came. My set holds 18 bits. The two ends of the rubber holder have slots, so there is a bit in each end. Great bit of kit. Thanks for the recommendation.
Didn't realize that!
I spent a while looking for a small set like these. I ended up on the same set of fix it sticks and love them.
Awesome review, if I may stating tool weight would be helpful ! Thanks for doing this !!!!
Thank you for showing these and for adding a list. You have helped me extensively, for I have just begun my EDC small tool collection. I am looking forward to your reviews. And I will certainly be looking back at your other postings since I have only now found you. This is a very informative video!!
Glad I could help!
Nice selection of tools. I probably use the cheap, belkin credit card sized bit kit that I picked up in the impulse aisle at microcenter 20+ years ago the most out of any of my bit sets. It has 6 universal bits and an extender
That Bit Bar Inline is a pretty⁵ versatile looking tool but for a $100....They should list that wallet lightening feature first thing off. J/S
Link to "Novel Carry Slideclick" is giving me a "403 Forbidden" error page. "Bolt EDC Tool" I believe is no longer in business. Great resource...Thank you for your hard work👍. Kudos from NYC🗽.
Need to remake this one
So thankful you have all these to discuss. I feel like multitool screwdrivers are the most challenging to discover and to pick among everything. I wanted something effective but small but I also wanted it to look beautiful/aesthetic. Was debating between the Bit Bar Inline, Wera 813R, Big Idea EDS 2 and Im' still not sure what to choose.
Of the BIDs...the bit bar or inline for sure.
@@maxlvledc Ooh thank you! Yip! I literally have these coming in the mail in the next 2-3 days. But knowing those 2 narrows it a bit!
This vid is so comprehensive. 😮
Big idea can’t wait!!! I was thinking about buying one didn’t know which one
Is that video out yet?
those pry bars are great! Definitely going in my list.
I've had a cybertool since they came out. If only the screwdriver was centered! I've looked for an edc screwdriver that could replace it. These are great options.
This makes for a very tough decision. Guess I'm going to have buy them all. A lot like trying to choose a puppy out of a lineup.
Well. If you need help narrowing it down let me know 👍
Great video, the precision drivers and utility knife in this video are what I didn't know I needed. So far the EDC tool that I've used the most is my Gerber dime. I've been laugh at by having it, but of all the tools I have, is the one that I've used the most and has helped me in dire situations as well.
Honestly if they made a Gerber Dime with Big Idea Design quality - but basically had the same size and parts - but better versions I'd totally buy it. The Gerber Dime is so portable in its size and in theory had the most useful tools (not in its actual usecase but the actual tools they were trying to provide). I just found that the parts were so hard to come out and didn't work as well. If it was like Victorinox quality but that size and look it'd be perfect. In many ways it's like the perfect size, the most useful tools (in theory) but just not executed correctly. TLDR if it actually had good tweezers (and weren't useless), if the scissors (were Victorionox quality), the bottle opener (is good), if the knife (came out easier and was more sleek), if the screw drivers were more better designed, if the pliers were like Knipex Cobra XS, etc. One can only dream. I'd have bought it and would pay a premium for them.
Ha! The Runoi is also the Power Torque Bit Ratchet, too. Very cool and glad it made in the video, as it's size is awesome and it's strength is awesomer.
I also really like that HOTO... thanks for introducing me to it.
That one, the power torque, the Topeak, VIM, Toptul, Mac, Facom, USAG, Blackhawk, WURTH , Dean, KS Tool, and many many more of these thumb wheel bit ratchets marked REVERSE GEAR are all made by HI-FIVE in Taiwan.
I'm trying to find a good affordable source for the Toptul CHEV 0811 here in the US.
I have the Vim locking flex head that KS Tool and WURTH also offer, but it turned out to be longer.
The Toptul CHEV 0811 is shorter and more like a flex head version of the GM power torque that I keep in my leatherman accessory pocket sheath next to my Leatherman Bond.
@@TylerSnyder305 I didn't know it was so universally distributed. Thanks for letting me know. I'll need to take a look at the Toptul CHEV.
The Elkink #22461 folding screwdrivers are BADASS
I'll have to look those up!
I love this. I came here from the similar pliers video you did. I've always wanted to look into kits like this but for a 1/4 inch socket set.
I’d have to say that the fix stick would probably be my favorite. Might have to pick one up for myself
I love the Maxcraft! I’ve been looking for something with traditional screw drivers (slotted and Phillips) because I don’t seem to need Torx and other specialty drivers. My pair of small Swiss Army knives gives me small and large drivers, but obviously can’t take those on a plane. The Maxcraft is a little bulky, but it’s lightweight When does just what I wanted at all to do and nothing more. Great find!
Great video! I carry the Milwaukee fastback on occasion and it is really good. For my EDC I usually carry a leatherman bit kit and a tool that works with them (leatherman skeletool, gerber armbar, etc.)
Would love to see a video on edc wrench options. I carry a leatherman piranha 2 but always looking out for cool options and ideas. in this area.
Did you see the plier vid?
@@maxlvledc sure did and it was another good one. The cobra pliers are on the short list of my next purchase and I have a Boker tech tool city 5. I was thinking more like multi tool wrenches similar to the piranha 2, tpt slide, and the wrench/pry bar I’ve seen you post in the past. Something thin/flat with a step down system that could maybe fit in a sheath behind a multitool.
@@hardcore9erfan . I carry the Milwaukee 5-1 daily and carry extra bits in a tin and I also carry the cobra xs pliers . With a Craftsman ratchet bit driver . And rite rain polka pen. All in chums wallet . Works great Mr maxedc has see this set his words was that's a lot of stuff. A hole set of metric Allen bits and torx and Phillips 1,2,3. Large flat heads and 2 Robbie .
My favorite was the fixitsticks. I never saw it before but it appealed the most to me.
Victorinox bit wrench, I edc this and it gets used almost daily, I keep a small tin of extra bits in a hamlet miniature cigar tin, it’s only slightly thicker than 1/4”, I’ve glued some thin liner material to silence the rattle, you can store over 40 bits, 50 if you count the 10 on the tool. Wrap some gorilla tape round the shaft for additional grip, you can never have to much gorilla tape…
I really enjoyed this video and found the info really useful. Just commenting to give a little algorithmic boost as my way of thanking you for the effort of making and posting your thoughts on these items. Thanks.
Ty!
Thanks for posting this. Noticed a lot of new and barely used tools. 🙂
Most of these I got just for the video honestly