Привет дорогой друг. Скажи пожалуйста как ты делаешь новые графики graph templates?? Я пытаюсь сделать но ничего не получается. Или надо на подключеном компьютере к автомобилю. Я без хондаты пробую и ничего не получается. Заранее спасибо вам
My car registers 5 knock count at idle?!? Why? Noise? My cylinder 3 has the most knock counts. I swapped the sparks plugs and still cylinder 3 has the higher knock counts compared to the their cylinders.
I'm getting insane amounts of knock counts about 60 per 3rd gear pull to redline and it's mainly cylinders 1,2 and 3. Cylinder 4 seems to be getting actual knocks
@@enhancedphysique6452my civic si k20 knocks all the time with high count and knock control for a year driven every day with 170k miles and it seems ok? 😂😅
@@enhancedphysique6452 well i think the way its measured and detects it is weird. But when i reflash it the car feels twice as powerful compared to running it for a month and its slower
Am not getting any knock count at all but the light keep popping up P0325. Yes the sensor is ok I try like 4 of them and yes the wiring good o ohms and test from ECU end to knock sensor still no knock and light keep popping up. #Hondata FlashPro 8Gen Civic Si
Your knock sensor is broken or the wire going to it is broken or it has a different knock sensor. The r18 knock sensor will work but its way off and reads different from the oem sensor
In the most negative column from about 3kRPM and up make the values negative, it will ignite the mixture too late when off throttle, creating a crackle as unburnt fuel passes through a hot exhaust and ignites
If i drive my RSX for 30 mins i see 9 or so knocks reported on my ktuner ecu, is that ok or safe? I notice the knock appear when i lug the engine in too high of a gear example 4th gear at 20 mph. Also my knock sensor broke and it's disabled, I thought that would stop it from reporting knock to begin with. The car is tuned by a prominent tuner here in South FL.
If the knock sensor is broken and disabled its impossible for it to register knock. That is a software issue that should be addressed by the software developer. Hondata does not have that problem if the knock sensor is disabled.
Do you add the timing limit after you tune the main spark map on the dyno?
Awesome guide
Jeff you're a BOSS man.
Привет дорогой друг. Скажи пожалуйста как ты делаешь новые графики graph templates?? Я пытаюсь сделать но ничего не получается. Или надо на подключеном компьютере к автомобилю. Я без хондаты пробую и ничего не получается. Заранее спасибо вам
if your knock level voltage is way under and not crossing the knock threshold what can adds you a knock count ?
My car registers 5 knock count at idle?!? Why? Noise? My cylinder 3 has the most knock counts. I swapped the sparks plugs and still cylinder 3 has the higher knock counts compared to the their cylinders.
I'm getting insane amounts of knock counts about 60 per 3rd gear pull to redline and it's mainly cylinders 1,2 and 3. Cylinder 4 seems to be getting actual knocks
Junk it then pal😂🎉
@@enhancedphysique6452my civic si k20 knocks all the time with high count and knock control for a year driven every day with 170k miles and it seems ok? 😂😅
Hahaha. Still going?? Bahahahaha
@@repingers9777 an don't forget she is a Honda . She will take it.
@@enhancedphysique6452 well i think the way its measured and detects it is weird. But when i reflash it the car feels twice as powerful compared to running it for a month and its slower
Am not getting any knock count at all but the light keep popping up P0325. Yes the sensor is ok I try like 4 of them and yes the wiring good o ohms and test from ECU end to knock sensor still no knock and light keep popping up. #Hondata FlashPro 8Gen Civic Si
Your knock sensor is broken or the wire going to it is broken or it has a different knock sensor. The r18 knock sensor will work but its way off and reads different from the oem sensor
Hey, how cut I cut my ignition on flashpro for pop and crackle on my 9th gen si?
Never do a crackle tune
In the most negative column from about 3kRPM and up make the values negative, it will ignite the mixture too late when off throttle, creating a crackle as unburnt fuel passes through a hot exhaust and ignites
man i i love you no homo. this seriously helped me a lot
You like that arms eh.
If i drive my RSX for 30 mins i see 9 or so knocks reported on my ktuner ecu, is that ok or safe? I notice the knock appear when i lug the engine in too high of a gear example 4th gear at 20 mph. Also my knock sensor broke and it's disabled, I thought that would stop it from reporting knock to begin with. The car is tuned by a prominent tuner here in South FL.
Wondering the same i put my Si in 4th gear and lug it alittle bit shows small knocks nothing crazy.
If the knock sensor is broken and disabled its impossible for it to register knock. That is a software issue that should be addressed by the software developer. Hondata does not have that problem if the knock sensor is disabled.
The only problem is ktuner doesn't give a shit about the older generations anymore. Really makes me mad and wish I would of bought hondata
You'll get knock counts. What you don't want is consistent knocks back to back.
@@ericmoney9734 I get knocks consistently when off the throttle going down hill
A bit slow here, hope someone can clarify.
MBT + KIL - (K.Control * K.Retard)
21 + 60 - (0.55 * 10)
81 - 5.5
= 75.5° ignition timing?
That doesn't seem right.
S300, no knock sensor 😭