58. Introduction to Metcalfe Kits, with a few tips to get the best out of your build.

Поділитися
Вставка
  • Опубліковано 22 кві 2021
  • Introduction to Metcalfe Kits, with a few tips to get the best out of your build.
    Toby's channel Roof Railways
    / @roofrailways101train
    Timbersurfs Channel
    • TimberSurf's Vid Bit N...
    Please Like Subscribe and Share
    This channel supports Donegal Railway Heritage Centre. Keeping the Narrow Gauge history alive in Donegal.
    Facebook / donegaldad
    Check out the merchandise, all proceeds go to support Donegal Railway Heritage Centre
    teespring.com/stores/donegal-dad
    Find out more about Donegal Railway Heritage Centre
    www.donegalrailway.com/
    Facebook / donegalrailwayheritage...
    / donegalmodelrailwayclub
  • Розваги

КОМЕНТАРІ • 32

  • @martinoconnor4314
    @martinoconnor4314 2 роки тому +2

    Hi, I love building card kits but I always found the chimney stacks and roof join to be messy so I came up with an easy, cheap solution, lead flashing made from cigarette papers. You can just cut the glue strip off and use that or if you need it wider then PVA the whole piece that you need. Colour it before sticking it on with a broad soft pencil then it actually looks like lead.

    • @DonegalDadRail
      @DonegalDadRail  2 роки тому +3

      Great Tip Martin.

    • @martinoconnor4314
      @martinoconnor4314 2 роки тому +2

      @@DonegalDadRail Cheers mate, it really improves the look. I paint the white edges of the kit windows and doors with diluted but not soaking wet, kids water paints from Asda before assembly then its already done before the building is finished. Another good tip I learnt was to lay a sheet of fine emery paper face down over the kit before you cut it out and roll over it a couple of times with a rolling pin to give the printed surface a bit of fine texture, it sort of breaks up the uniformity of the print. I love the idea of using spacers behind the windows before fitting the curtains, I'll have to try that.

  • @Finnertoncentralmodelrailway
    @Finnertoncentralmodelrailway 3 роки тому +1

    I absolutely love metcalfe kits mark, you did a nice job there nice one.

  • @ModelTrainOutsider
    @ModelTrainOutsider 3 роки тому +1

    I have watched Richard at Trains in the Attic, among others, use these, and I continue to be impressed. Nice work and they are definitely a nice addition.

    • @DonegalDadRail
      @DonegalDadRail  3 роки тому +1

      Thanks Anthony they are really good kits and can easy be customized.

  • @somersetandy9238
    @somersetandy9238 3 роки тому +1

    Hi Mark. Great Video. I Have Built Many Of Them. Building My Station Yesterday From Metcalfe. Awesome Kits. Stay Safe. Cheers Andy.

  • @TONYNORTHEASTERN
    @TONYNORTHEASTERN 3 роки тому +1

    Metcalfe kits love them. easy to build and you can kit bash them. thanks for sharing Mark........Cheer's Tony

  • @brianmatthews1469
    @brianmatthews1469 Рік тому +3

    Excellent video. Where can I get some of those magnetic corners? Have looked everywhere but cannot find them.

    • @DonegalDadRail
      @DonegalDadRail  Рік тому +1

      Thank you Brian, I got my corner clamps here www.scalecast.co.uk/store/p343/MAG01.html#/

  • @roystudds1944
    @roystudds1944 3 роки тому +1

    Great video. I’ve got a few Metcalfe kits on my layout. I find that the Rocket card glue sets so quickly you don’t have a lot of time to adjust the position if you don’t get it right first time. Good job on that one. Roy.

    • @DonegalDadRail
      @DonegalDadRail  3 роки тому +1

      Thanks Roy that's what I like about the rocket card glue, but you are right it doesn't leave much margin for error.

  • @normanrowe2831
    @normanrowe2831 3 роки тому +1

    Hi ya Mark. I like these kits. I get e-mails from Metcalfe all the time. I might break down and try one. Although I’m an N scaler, so it might be a little fiddlely. Nicely done Mark. See ya.

    • @DonegalDadRail
      @DonegalDadRail  3 роки тому +1

      They are great kits, my daughter has done a few N scale kits they are a bit fiddly but not to bad.

  • @railway187
    @railway187 2 роки тому +1

    Very interesting video 👍👍👍👍

  • @phillwhitehead8591
    @phillwhitehead8591 Рік тому +1

    Great Chanel

  • @london19657
    @london19657 10 місяців тому +1

    Nice video. Btw, I find using coloured pencils is cheap and effective for the exposed edges. Cheers.

  • @kevinb9327
    @kevinb9327 Рік тому +1

    I just subscribed. I live in Florida, And model in N scale.
    I had the privilege to travel to Doneraile in County Cork, to bask in my heritage. ☘️
    What was the other channel you mentioned?

    • @DonegalDadRail
      @DonegalDadRail  Рік тому +2

      Thanks Kevin, I love florida have been there 3 times, although it is a bit warm for me. The Channel I mentioned at the begining was Roof Railways www.youtube.com/@RoofRailways101train He hasn't posted anything for a while I think he is busy with college. Thanks Mark

  • @dylansheppardmymodelrailway
    @dylansheppardmymodelrailway 3 роки тому +1

    I like metcalf3s kits

    • @DonegalDadRail
      @DonegalDadRail  3 роки тому +1

      They are very good kits.

    • @dylansheppardmymodelrailway
      @dylansheppardmymodelrailway 3 роки тому +1

      I've got a few in post extendeding my farm good vid might try the old rocket card glue i use p v a

    • @DonegalDadRail
      @DonegalDadRail  3 роки тому +1

      @@dylansheppardmymodelrailway Rocket card glue works really well on these kits.

  • @frankkleij9149
    @frankkleij9149 Рік тому +1

    just a cheap way to promote them. stop with it !