These are the useful videos that we need more of out there. Some people hate but this is what a lot of consumers need and appreciate having and with top notch production quality.
@@TechnicallyTee I just picked wanna go with white stone domes up for my S22 I'm definitely having anxiety about Doing it i shouldn't be nervous about it but i am for some
A flashlight/phone light is likewise a great way to see if the LOCA has spread to all corners if your lighting is not studio lighting. Saved me several times.
Dude thank you! I put one of these on my Note 9 a few years ago and thought I could jump right back in without a guide. You are a boss for going step-by-step 🤙🏻
Got the S22 Ultra last week and had gotten a film type protector from a company i had gotten tempered glass protectors from before. Was okay, but not even a day and it had visible scratches and I was constantly pressing out air bubble along the edge. The whitestone was the number one recommended tempered glass protector so I went this route even though the idea of liquid adhesive made me nervous. I watched the silent one they did and then you're once through each before attempting the install. Watched the video on my old phone as I did it and the install went near perfect. Only hiccup was when the glue immediately started veering left even though i had checked the desk with a level before hand. Turns out the phone had gotten a little loose from the frame during cleaning. But quick reaction time had me tilting the phone in time to save the glue. :P But anyway. Video was wonderful and super helpful, and I was much more confident going into the installation process after watching it. So thank you very much. Also. That feeling when you go to put on the black protection stickers and realize that you never took the new phone film off the sides. 🤣🤣🤣
OMG this tutorial video was incredible. There were so many horror stories of putting this screen protector on the 22 Ultra. I followed exactly what you instructed and it worked perfectly. A MILLION Thank yous.
Thanks for this, man! Great guide, way better than the silent one that whitestone did. One tip for people going through, it doesn't hurt to grab a level and check your table before your start. I had to start over because my table was really unlevel and the glue ended up rolling to the absorption pad on the side and I lost like half. Not the fault of the video, I just didn't realize how fast the liquid move.
Yeah that's true you have to make sure you're on a level surface. Don't try to do this on your bed or anything lol. Thanks I appreciate that comment man.
Watched your video and the installation went perfect on both mine and my wife's phone. No muss, no fuss and no bubbles. Your video was simple , but detailed. The they all should be.
Everyones complaining about the process. But I have tried multiple different screen protectors for my Samsung with curved screens over the years and none of them would stay on the phone they consistently popped off especially if I had a case on it (even if it was case friendly). I bought the s22 ultra and a friend recommended the whitestone. This is by far the cleanest I have gotten a screen protector on a curved screen. Its not bummping up against the edge of my otterbox case so its not going to cause it to pop off. So far this is the best success I've had with a screen protector.
Bingo. Everyone might complain but if you've tried different protectors for the curved display, you would know that nothing comes close to this. Once you install a few the whole process isn't even that bad.
Have an 22 ultra with installed dome glass, OtterBox defender pro. Everything fits great! Screen protector as plenty of room on all sides so the case does not interfere it.. ie: lifting..
I watched this episode once before I ordered the screen protector. And literally I just now finished installing it again, while watching this video. It came out PERFECTLY. Thank you so much for this video and everything you do. 💕
This is got to be the best demonstration of the full process I've seen, thanks. I've just bought the whitestone dome for my S22 ultra from amazon UK, got a 2 pack for £25.49
I have placed the glass easy enough with the help of your video. But I would like to inform everyone that after one month of use the glass starts to have little broken areas at the edges. The phone has never had a fall. I have talked to others with the same problem
This was simply and precise with precision. Thank you. I've used Whitestone Dome Glass before on my Samsung S9. Of course, I needed it on my Galaxy S22 Ultra.
First off this vid is super good, mad props. I will say tho, I tried to install this twice on my phone before any install videos like yours were out and it was a hellish nightmare, I followed instructions to a T still glue everywhere, maybe my third time I could get it right but one screen broke out the package. So I ended up with 40 bucks down the drain and bought a TPU protector. The company should legit pay you for this installation guide and post yours as the official video man. Needless to say, I'm sure the product works good that's if you can install it... Anyway, awesome video, but to anyone buying this protector just know it is tedious and if you don't wipe the glue properly it can ruin your phone buttons/ speaker. Oh and whites stone dome customer support is the worst i've ever dealt with.
Just got my Ultra. I went screen protector-less with my S8+ and things went mostly fine over those years, but I'm not taking any chances with this one. Need to find a great case, too. Samsung's pokey cameras on the back are just silly, so basically we have to make up for their weirdness with all these third-party peripherals. Thank you for the great, concise step-by-step guide!
This is the second time I watched your video along with installing the screen protector. I'm a mechanic and my phone gets pretty abused but to both your credit in doing this video I had the confidence to do it again (with a little less anxiety) and although I've dropped my phone quite a few times this screen protector has really done it's job and not let a scratch onto the actual screen. Removal of the old screen protector was really easy too, just start peeling and it all comes off.
@nightsinmalibu It's held up pretty well. I got a little impatient when installing the new screen and I have a few very tiny bubbles but you have to look to see them. The old screen came off pretty easy too once I started peeling it back.
Great video!! Literally followed this step by step and it's worked perfectly. Previously had a cheap one installed but the finger print reader never worked. The only thing I was recommended to do with the Whitestone protector was, after the first 15sec light bursts, press down on the fingerprint reader for a 5-10 seconds, then do the 60sec light bursts - seems to have guaranteed the fingerprint working better than ever.
My first time using Whitestone Dome and I was nervous to glue anything to my brand new S22 Ultra but this video made it seem less daunting and so I followed the directions to a T and my results were perfect on both mine and my wife's phone. I am thrilled and the new protector feels like the original screen. Smooth and slick. Thanks TechnicallyTee for a fun, simple ad entertaining video.
This video was better than the one Whitestone posted on their website for installation. I watched the video Whitestone has up and ruined the first glass. After watching your video I was successfully able to install without flaws. Thank you so much for posting this.
Now, this is what I'm talking about. I installed one of these on a Galaxy Note 10 a couple years ago, and screwed it up a little. Following your tutorial made it so much easier on my 22 Ultra. Thanks!
I was too scared to do it myself😂 I showed my wife the video and after that she followed the video step by step. The result is amazing. It looks so gorgeous she did it absolutely perfect. Thank you so much for the video. Really enjoying the s22 ultra😍😍
I've used these screen protectors before, always had perfect results and they've saved my phones countless times. Personally wouldn't use anything else! Great vid!
Great video, I actually used your guide as a walk through with my installation. The only downside of the actually screen protector is that THE FINGERPRINT SENSOR DOESN'T WORK even with the increased sensitivity turned on.
Same, my fingerprint sensor doesn't work even after setting new fingerprints after installing the whitedome screen protector. When I need to unlock it it doesn't work. Just says press harder.
I love this comment, at least someone that has problem with the screen protector. I've bought in on so many screen protector and was almost convinced that I should buy this one. This comment saved me $$.
Yep, same problem with mine as well but a lot more than just the finger print not working. S-pen doesn't work properly, keyboard doesn't work right and games are also affected. frustrating to say the least. debating on trying other screen since I bought a 2 pack or go out a buy something else. never had this problem with whitestone glass in 8yrs using them on all my other Samsungs, just the S22ultra for some reason.
Thanks for this awesome video... you made this process easier for us newbies. Your calmness through this process was assuring. I got a perfect install on my first try.
I used this video when installing and it Made it so easy I wouldn't have been able to do it without this video and the creator also answered my question of if it works with my case best, nicest, and kindest person I have ever met in my life thanks so much ❤ x
This is the best “How To” video I have found. Just a great job making all the steps easy. It worked on the first try. Now I have an extra for when the first gets cracked.
Thanks your video was spot on for the S22 ultra. Tidbit: trust the screen, aligns perfect when layed in & be mindful each Whitestone dome glass is different per phone. Find the video that matches kit. I did 2 identical phones & one I redid prints other zero issues. Looks amazing installed
Perfect installation, got my s22 ultra today and followed step by step. So happy with result but fingerprint now only picks up 2/10 times . Re-registered twice but no luck. Screen is so perfect I'm leaving it and using face recognition. Screen sensitivity turned on too 🤷🏿
Honestly I've always had good results with it but honestly I unboxed it and literally put the protector on. Might take mine off to see if there is a huge difference.
@@MrCaribe65 make sure you've deleted all fingerprints. Re-register both fingers or thumbs twice and try both with screen sensitivity off and on. Make actually works better without screen sensitivity turned on
I rarely leave comments on videos, but man, you deserve a comment for this video! You made an intimidating process VERY easy to accomplish! Thanks much for the easy to follow and perfectly accurate process. I've never had a bubble free screen protector before this one. You rock!!
Going to be installing the Whitestone Dome on my brand new S22U. Really appreciate your detailed guide. Keep it up. An update: just installed it. Everything went well. Despite all care, I happen to spot a tiny bubble due to a dust particle that managed to evade my ever so cautious scan. Nothing can be done now, sad. Also there's a rainbow effect near the camera, more prominent in white backgrounds.
Thank you!!! Your video is the best. Today my Whitestone screen protector arrived and I happened to find your video at the right moment. I watched it 2 times and then I played and stopped it as I was doing it step by step and you know what that really helped me alot. I was able to install it with no problem. Again, thank you!!! 😊 👍
Thank you for this video. It was really clear and helpful! I ended up only having a couple issues, after following the instructions - I ended up with a tiny bubble where the glue initially deposited. I'm not sure how to prevent that from happening again... Also I had a LOT of glue leak out on all four sides of the protector and got all over the sides of my phone. Luckily the stickers were in place to protect everything, but it was still surprising.
Great instruction video. I've been using Whitestone on my Samsungs for last 8yrs and never once had any problems with them. bit of a pain to install compared to other screen protectors but they always worked great and never had problems with them till now on my S22ultra. fingerprint will no longer work, won't even register on my phone in order to set a new one. also have found that the pen barely works as well. typing isn't right and games are even affected even with the sensitivity turned on. idk maybe something didn't properly work this time with curing or something so thinking about trying the other screen since it was cheaper to buy a 2 pack. hesitate to try other screen thinking I may end with same results but also tired of everything on a $1500 phone not working properly.
I got this screen protector and installed it last week (before I saw this video that just popped up on my feed). It's by far been the best I've used. It doesn't even look like there is anything on the screen and it handles fingerprints and smudges much better than the phone screen itself. The fingerprint reader is just so so, even after turning the sensitivity setting on and redoing my fingerprints setups. That aside though, it's a great screen protector.
I like tutorials that are thorough. I watched a different video initially which skimped on details concerning the taping step. I found your video next, and it was perfect. Thanks!
Thank you so much! I just install my white stone dome screen protector on my S22 ultra. Your instructions were right on and the install came out great!
Thank you for the fab vid! When I dropped the cover onto the glue it did have a few air bubbles left by the time it had reached the edges (which did take a while and bit of tipping the phone), but I brushed the air bubbles away to the sides using the microfiber cloth before curing, and that seemed to get rid of them. Thanks again for the great vid! I bought my phone second hand, and there were scratches all over the screen. Now there are none! 😀
Installed this today alongside your video. Thank you so much! I was concerned wether the fingerprint sensor would work or not, and its working just fine. Just had to re-register my fingerprints and have to press a little harder each time. Other then that, it was a clean, bubbleless install. Looks and feels very proffesional. Thank you bro!!!
Thank you, watched your video and followed the steps one by one and it worked out. Using a flashlight will help with finding dust / and I used a credit card to get rid of the air bubbles before using uav light. Thank you for the help =)!!!
Excellent video my man. My install was perfect. PERFECT. No dust, bubbles, dead straight on. And I'm heartbroken because the fingerprint sensor doesn't work. Tried everything. Increased touch and redid prints. Scanned the same finger 3 times in the phone to see if that would help. Nope. I've been using domes for years and this is the first time I've had this problem. My oneplus 7 pro was flawless with the dome and FP reader. My hunt continues for a decent protected I suppose
Thank you so much! I used this same brand of screen saver on my last phone and it is a miracle saver! I won't have a phone without it ever again. However, I do need this video to walk me through getting it on correctly and I can't thank you enough.
You helped me install my screen protector without a problem !!! Thank you so much for the fantastic tutorial. Really appreciated it. Would not have bought it if it wasn't for you 😄
Hi! I already mounted Dome Glass on Note10+ 2 years ago and now on S22 Ultra, and every time I have a very annoying problem: light leaks at the edge of the glass. This glowing frame, right after putting the glass on, is usually broken in some places, slightly chipped or thickened. What am I doing wrong - washing off excess glue too much before curing or what? I am asking for advice.
how thick is this screen protector? or rather, how far out of the sides of the screen does it stick out? would it make it difficult to put on rugged cases like the UAG for example or will it accommodate any case perfectly fine?
How long do you wait for the glue? I bought and returned them. The first screen got what I thought was a bubble under come to find out I was able to scratch the "glass" with my thumb nail. The 2nd one I did later that night and I think I didn't wait long enough. The liquid moved and covered everything but then it kept oozing out so I pulled it off
Thanks for this one man! I screwed up a bit the first time I tried but luckely I got a 2-pac. The other one went one, no problem and finger print works just fine! But great video, very clear!
Great video but WARNING!!! I created a trapped air bubble by tapping on the glue too much. The last drop from tapping created an air bubble so I had to start all over with the second screen protector after cleaning everything off the phone. On my second attempt I tapped lightly once. Removed the glue harness very carefully. The results are amazing. So, if you see an air bubble try popping it with a needle / toothpick before continuing. If that doesn't work paper towel the glue off, clean everything up and start again because if you commit dropping the glass on it hopping to push it out it does not work. Oh, one last thing make sure the table surface is very level it makes a big difference on how the glue settles. Mine was not level so I used a couple of credit cards to make the tray level on my table.
What a fantastic video. Really appreciate the vid, extremely useful, just followed your instructions step by step and the install went very smoothly. Thanks very much.
Best screen protector for smartphones period. Great tutorial of the installation, I'm behind the game on getting the S22 Ultra, but finally got mine today, same color as yours. Now time for the screen protector installation 👍
Excellent content. Thank you my friend. Question about registering fingerprints....my S22 Ultra (Burgundy) is arriving next week - I am planning on installing this first thing when I take the phone out of the box...even before powering on, activating & setting up. I would assume installing this first then registering Fingerprints during the initial setup would work the same?? (Without first registering a set before the WD install)
Thanks I appreciate it. I had mine registered and after the install, I deleted them and re did them so technically you can do a fresh install and then register them afterwards.
Man, this is an absolutely hellish process and I ended up with a tiny bubble speck where the glue is initially dropped. Also, can't stress your work station being level enough! The glue moves rapidly at the slightest tilt!
Hey man do you still have it on the phone? How is it holding up? I wanna get one but there are so many negative reviews with sudden chips, lifting, fingerprintreader issues... I wonder if they are user installation errors, bad luck or bad quality control. For this money I would like the protector to last and I am worried/skeptical
Awesome video. Thanks to your great advice I bought this screen protector. It has been installed perfectly, without fingerprint marks or bubbles, however I have problems with the fingerprint sensor. Any way to fix it? I'm going crazy from so many authentication failures. Thank you very much Tee!
Thanks much appreciated. It's crazy I'm hearing so many people with issues. I'm going to make a video talking about all these issues because I have no issues with my FPS.
These are the useful videos that we need more of out there. Some people hate but this is what a lot of consumers need and appreciate having and with top notch production quality.
Thanks bro I appreciate it! Tried to make it clear and consise as possible.
@@TechnicallyTee I just picked wanna go with white stone domes up for my S22 I'm definitely having anxiety about Doing it i shouldn't be nervous about it but i am for some
@@TechnicallyTee gjko94
Great instructional video! Tip: use a flashlight to shine onto the screen during dust removal, it aids in seeing even the smallest particles.
Never done that before but I'll def keep that in mind for next time.
P
Thanks for the flashlight tip. I would've missed two or three tiny tiny pieces of dust that hopped on the screen
How does water affect the screen protector? If the phone is submerged will it get loose or fall off?
A flashlight/phone light is likewise a great way to see if the LOCA has spread to all corners if your lighting is not studio lighting. Saved me several times.
Dude thank you! I put one of these on my Note 9 a few years ago and thought I could jump right back in without a guide. You are a boss for going step-by-step 🤙🏻
💪🏽💪🏽
Got the S22 Ultra last week and had gotten a film type protector from a company i had gotten tempered glass protectors from before. Was okay, but not even a day and it had visible scratches and I was constantly pressing out air bubble along the edge. The whitestone was the number one recommended tempered glass protector so I went this route even though the idea of liquid adhesive made me nervous. I watched the silent one they did and then you're once through each before attempting the install. Watched the video on my old phone as I did it and the install went near perfect. Only hiccup was when the glue immediately started veering left even though i had checked the desk with a level before hand. Turns out the phone had gotten a little loose from the frame during cleaning. But quick reaction time had me tilting the phone in time to save the glue. :P But anyway. Video was wonderful and super helpful, and I was much more confident going into the installation process after watching it. So thank you very much.
Also. That feeling when you go to put on the black protection stickers and realize that you never took the new phone film off the sides. 🤣🤣🤣
OMG this tutorial video was incredible. There were so many horror stories of putting this screen protector on the 22 Ultra. I followed exactly what you instructed and it worked perfectly. A MILLION Thank yous.
No problem! That’s exactly what I wanted to accomplish in this video!
How's it holding up?
Top video.
Easy to follow, good clear concise instructions.
Doesn't speed through.
Helped me produce perfect results first time. Cheers mate!
Thanks and glad I was able to help out! Yeah idc how long these videos are because I want everything to be clear.
Thanks for this, man! Great guide, way better than the silent one that whitestone did. One tip for people going through, it doesn't hurt to grab a level and check your table before your start. I had to start over because my table was really unlevel and the glue ended up rolling to the absorption pad on the side and I lost like half. Not the fault of the video, I just didn't realize how fast the liquid move.
Yeah that's true you have to make sure you're on a level surface. Don't try to do this on your bed or anything lol. Thanks I appreciate that comment man.
@@TechnicallyTee,
Watched your video and the installation went perfect on both mine and my wife's phone. No muss, no fuss and no bubbles. Your video was simple , but detailed. The they all should be.
Everyones complaining about the process. But I have tried multiple different screen protectors for my Samsung with curved screens over the years and none of them would stay on the phone they consistently popped off especially if I had a case on it (even if it was case friendly). I bought the s22 ultra and a friend recommended the whitestone. This is by far the cleanest I have gotten a screen protector on a curved screen. Its not bummping up against the edge of my otterbox case so its not going to cause it to pop off. So far this is the best success I've had with a screen protector.
Bingo. Everyone might complain but if you've tried different protectors for the curved display, you would know that nothing comes close to this. Once you install a few the whole process isn't even that bad.
Anna, which otterbox case are you using? I just ordered my s22 ultra and I'm adding this protector to cart.
Have an 22 ultra with installed dome glass, OtterBox defender pro. Everything fits great! Screen protector as plenty of room on all sides so the case does not interfere it.. ie: lifting..
I watched this episode once before I ordered the screen protector. And literally I just now finished installing it again, while watching this video. It came out PERFECTLY. Thank you so much for this video and everything you do. 💕
Awesome! 😊
This is got to be the best demonstration of the full process I've seen, thanks.
I've just bought the whitestone dome for my S22 ultra from amazon UK, got a 2 pack for £25.49
Your video worked out WAY better for me than the one from Whitestone where I had to redo it, despite watching it several times to prep.
Thanks and that's exactly what I wanted it to do! Glad it was able to help you out!
Just followed your instructions. Everything works perfect. No bubbles and fingerprint reader works just fine. Thanks! 🙌
I followed the instructions on your video, and my install turned out perfect! Thank you brother.
Glad I was able to help you out!
The tip of applying finger sensor pressure for about 20 sec between UV applications worked very well. I had not seen this before. Thanks
I have placed the glass easy enough with the help of your video. But I would like to inform everyone that after one month of use the glass starts to have little broken areas at the edges. The phone has never had a fall. I have talked to others with the same problem
Same issue here
This was simply and precise with precision. Thank you. I've used Whitestone Dome Glass before on my Samsung S9. Of course, I needed it on my Galaxy S22 Ultra.
First off this vid is super good, mad props. I will say tho, I tried to install this twice on my phone before any install videos like yours were out and it was a hellish nightmare, I followed instructions to a T still glue everywhere, maybe my third time I could get it right but one screen broke out the package. So I ended up with 40 bucks down the drain and bought a TPU protector. The company should legit pay you for this installation guide and post yours as the official video man. Needless to say, I'm sure the product works good that's if you can install it... Anyway, awesome video, but to anyone buying this protector just know it is tedious and if you don't wipe the glue properly it can ruin your phone buttons/ speaker. Oh and whites stone dome customer support is the worst i've ever dealt with.
Thanks man much appreciated. Yeah it can be challenging even with step by step guides.
Just got my Ultra. I went screen protector-less with my S8+ and things went mostly fine over those years, but I'm not taking any chances with this one. Need to find a great case, too. Samsung's pokey cameras on the back are just silly, so basically we have to make up for their weirdness with all these third-party peripherals.
Thank you for the great, concise step-by-step guide!
No problem!
Zagg screen protector with lifetime warranty and Otter Defender case. You'll be set
This is the second time I watched your video along with installing the screen protector. I'm a mechanic and my phone gets pretty abused but to both your credit in doing this video I had the confidence to do it again (with a little less anxiety) and although I've dropped my phone quite a few times this screen protector has really done it's job and not let a scratch onto the actual screen. Removal of the old screen protector was really easy too, just start peeling and it all comes off.
Hi David! How has the second installation held up?
@nightsinmalibu It's held up pretty well. I got a little impatient when installing the new screen and I have a few very tiny bubbles but you have to look to see them. The old screen came off pretty easy too once I started peeling it back.
@@freefromthestruggle Ahh okay, for sure, thank you for letting me know!
Great video!! Literally followed this step by step and it's worked perfectly. Previously had a cheap one installed but the finger print reader never worked. The only thing I was recommended to do with the Whitestone protector was, after the first 15sec light bursts, press down on the fingerprint reader for a 5-10 seconds, then do the 60sec light bursts - seems to have guaranteed the fingerprint working better than ever.
Yep that's a little tip I always forget but glad you got it Installed great.
My first time using Whitestone Dome and I was nervous to glue anything to my brand new S22 Ultra but this video made it seem less daunting and so I followed the directions to a T and my results were perfect on both mine and my wife's phone. I am thrilled and the new protector feels like the original screen. Smooth and slick. Thanks TechnicallyTee for a fun, simple ad entertaining video.
This video was better than the one Whitestone posted on their website for installation. I watched the video Whitestone has up and ruined the first glass. After watching your video I was successfully able to install without flaws. Thank you so much for posting this.
Someone dropped your vid in a Amazon review for a s22 case..... Made it hella easy. THANKS!!
Now, this is what I'm talking about. I installed one of these on a Galaxy Note 10 a couple years ago, and screwed it up a little. Following your tutorial made it so much easier on my 22 Ultra. Thanks!
I was too scared to do it myself😂 I showed my wife the video and after that she followed the video step by step. The result is amazing. It looks so gorgeous she did it absolutely perfect. Thank you so much for the video. Really enjoying the s22 ultra😍😍
Haha glad it worked out for you!
I've used these screen protectors before, always had perfect results and they've saved my phones countless times. Personally wouldn't use anything else! Great vid!
Thanks much appreciated!!
Great video, I actually used your guide as a walk through with my installation. The only downside of the actually screen protector is that THE FINGERPRINT SENSOR DOESN'T WORK even with the increased sensitivity turned on.
I've been seeing some people complain about that but mine works fine. No issues at all. You deleted your old one and registered new ones correct??
@@TechnicallyTee yes I did Sir.
Same, my fingerprint sensor doesn't work even after setting new fingerprints after installing the whitedome screen protector. When I need to unlock it it doesn't work. Just says press harder.
I love this comment, at least someone that has problem with the screen protector. I've bought in on so many screen protector and was almost convinced that I should buy this one. This comment saved me $$.
Yep, same problem with mine as well but a lot more than just the finger print not working. S-pen doesn't work properly, keyboard doesn't work right and games are also affected. frustrating to say the least. debating on trying other screen since I bought a 2 pack or go out a buy something else. never had this problem with whitestone glass in 8yrs using them on all my other Samsungs, just the S22ultra for some reason.
Thanks for this awesome video... you made this process easier for us newbies. Your calmness through this process was assuring. I got a perfect install on my first try.
That's what I'm talking about! Glad I was able to help you out!
Yup I'm getting this, wasn't sure after reading some Amazon reviews. But this video and some commentators change my mind. 👍 Thanks.
Glad I was able to help out!
I used this video when installing and it Made it so easy I wouldn't have been able to do it without this video and the creator also answered my question of if it works with my case best, nicest, and kindest person I have ever met in my life thanks so much ❤ x
This is the best “How To” video I have found. Just a great job making all the steps easy. It worked on the first try. Now I have an extra for when the first gets cracked.
🐐 So much better than their install video, they put your video on the site and I'm glad they did, thanks man
Thanks your video was spot on for the S22 ultra. Tidbit: trust the screen, aligns perfect when layed in & be mindful each Whitestone dome glass is different per phone. Find the video that matches kit. I did 2 identical phones & one I redid prints other zero issues. Looks amazing installed
Tee is the Grandmaster General of cases, accessories and more!
Perfect installation, got my s22 ultra today and followed step by step. So happy with result but fingerprint now only picks up 2/10 times . Re-registered twice but no luck. Screen is so perfect I'm leaving it and using face recognition. Screen sensitivity turned on too 🤷🏿
Honestly I've always had good results with it but honestly I unboxed it and literally put the protector on. Might take mine off to see if there is a huge difference.
@@TechnicallyTee Very weird but turned touch sensitivity off and added my fingerprint twice and now working perfect. Very happy, props again bro
Yep add them twice and turn sensitivity on and you should be good. I also deleted my other fingerprints that I had before.
Mine is also giving me issues. I tried what you guys suggested, but it still doesn't work for me.
@@MrCaribe65 make sure you've deleted all fingerprints. Re-register both fingers or thumbs twice and try both with screen sensitivity off and on. Make actually works better without screen sensitivity turned on
Best instruction for this product I could find. The other ones I found were not explanatory enough and ruined my first try. Thank you!
I’m glad it helped you out! 💪🏽💪🏽
Perfect tutorial. I followed it to the letter and my screen protector went on flawlessly! Thank you!
Dope and glad I could help out!
I rarely leave comments on videos, but man, you deserve a comment for this video! You made an intimidating process VERY easy to accomplish! Thanks much for the easy to follow and perfectly accurate process. I've never had a bubble free screen protector before this one. You rock!!
As much as I like the official tutorial vid, this brings new angles to the installation. Thanks!
No doubt! 💪🏽💪🏽
This is such a useful video. Thank you for taking the time to explain and show step by step. Excellent review and walkthrough! Cheers!
Glad I was able to help! 💪🏽💪🏽
Going to be installing the Whitestone Dome on my brand new S22U. Really appreciate your detailed guide. Keep it up.
An update: just installed it. Everything went well. Despite all care, I happen to spot a tiny bubble due to a dust particle that managed to evade my ever so cautious scan. Nothing can be done now, sad. Also there's a rainbow effect near the camera, more prominent in white backgrounds.
Perfect step by step. My turned out 100% Flawless. Thank You for the Video.
Thank you!!! Your video is the best. Today my Whitestone screen protector arrived and I happened to find your video at the right moment. I watched it 2 times and then I played and stopped it as I was doing it step by step and you know what that really helped me alot. I was able to install it with no problem. Again, thank you!!! 😊 👍
Thank you for making this video. I was able to apply my screen protector without issue!
FYI to all.....like previous generations...the whitestone dome works well with UAG cases. My s22 ultra fits perfectly well with the UAG monarch.
This is the most helpful video that I've seen. People need this. Thanks for this video
Glad it was able to help out.
You really simplified the entire process. Great job.
Thank you for this video. It was really clear and helpful! I ended up only having a couple issues, after following the instructions - I ended up with a tiny bubble where the glue initially deposited. I'm not sure how to prevent that from happening again... Also I had a LOT of glue leak out on all four sides of the protector and got all over the sides of my phone. Luckily the stickers were in place to protect everything, but it was still surprising.
Great instruction video. I've been using Whitestone on my Samsungs for last 8yrs and never once had any problems with them. bit of a pain to install compared to other screen protectors but they always worked great and never had problems with them till now on my S22ultra. fingerprint will no longer work, won't even register on my phone in order to set a new one. also have found that the pen barely works as well. typing isn't right and games are even affected even with the sensitivity turned on. idk maybe something didn't properly work this time with curing or something so thinking about trying the other screen since it was cheaper to buy a 2 pack. hesitate to try other screen thinking I may end with same results but also tired of everything on a $1500 phone not working properly.
I got this screen protector and installed it last week (before I saw this video that just popped up on my feed). It's by far been the best I've used. It doesn't even look like there is anything on the screen and it handles fingerprints and smudges much better than the phone screen itself. The fingerprint reader is just so so, even after turning the sensitivity setting on and redoing my fingerprints setups. That aside though, it's a great screen protector.
I like tutorials that are thorough. I watched a different video initially which skimped on details concerning the taping step. I found your video next, and it was perfect. Thanks!
Thank you so much! I just install my white stone dome screen protector on my S22 ultra. Your instructions were right on and the install came out great!
Thank you for the fab vid! When I dropped the cover onto the glue it did have a few air bubbles left by the time it had reached the edges (which did take a while and bit of tipping the phone), but I brushed the air bubbles away to the sides using the microfiber cloth before curing, and that seemed to get rid of them. Thanks again for the great vid! I bought my phone second hand, and there were scratches all over the screen. Now there are none! 😀
Thank you man.... you did a GREAT job...VERY VERY helpful. I did exactly what you said & showed... It came out PERFECT!!!!
Glad I was able to help!
Thank you for doing this video! It made the install so easy, following your instructions, step by step.
Best install video I've seen on UA-cam. Thank you my friend
Thanks bro. Your video is spot on. I had a perfect install!
Glad it was able to help you out!
Installed this today alongside your video. Thank you so much! I was concerned wether the fingerprint sensor would work or not, and its working just fine. Just had to re-register my fingerprints and have to press a little harder each time. Other then that, it was a clean, bubbleless install. Looks and feels very proffesional. Thank you bro!!!
No way I could've installed this properly based on the instructions. Thanks fam!
Just want to say thank you for making such a detailed video, helped me out a great deal.
Thank you, watched your video and followed the steps one by one and it worked out. Using a flashlight will help with finding dust / and I used a credit card to get rid of the air bubbles before using uav light. Thank you for the help =)!!!
Excellent video my man. My install was perfect. PERFECT. No dust, bubbles, dead straight on.
And I'm heartbroken because the fingerprint sensor doesn't work. Tried everything. Increased touch and redid prints. Scanned the same finger 3 times in the phone to see if that would help. Nope.
I've been using domes for years and this is the first time I've had this problem. My oneplus 7 pro was flawless with the dome and FP reader.
My hunt continues for a decent protected I suppose
Man that’s crazy because mine works just fine with no issues.
Let us know how the hunt goes because I'm looking for one as well for my new baby.
Once again amazing video Tee💪🏽. Love your channel and the variety you bring to the accessory game.
Thanks I really appreciate it!!
Really appreciate the video. The whole leveling thing was a must. Thanks for making the install a one and done.
Glad the video was able to help you out! 💪🏽💪🏽
whitestonedome linked your install video under theirs on the install page... Great job with providing the right amount of detail. Thanks!
Thank you so much! I used this same brand of screen saver on my last phone and it is a miracle saver! I won't have a phone without it ever again. However, I do need this video to walk me through getting it on correctly and I can't thank you enough.
You helped me install my screen protector without a problem !!! Thank you so much for the fantastic tutorial. Really appreciated it. Would not have bought it if it wasn't for you 😄
That's what's up right there and glad I was able to help out!!
Good job man on the walk through did my Ultra Step-By-Step Perfect.
God-bless!!!
Hi! I already mounted Dome Glass on Note10+ 2 years ago and now on S22 Ultra, and every time I have a very annoying problem: light leaks at the edge of the glass. This glowing frame, right after putting the glass on, is usually broken in some places, slightly chipped or thickened. What am I doing wrong - washing off excess glue too much before curing or what? I am asking for advice.
Thank you! I couldn't have installed this so well without your video. Perfect pacing and detail!
You are a lifesaver! I love this as you explained it. Made it so much easier to install! Thank you so much!
Glad I was able to help you out!
Thanks for the step-by-step instructions
💪🏽💪🏽
just got the s22 ultra and man this video helped me alot
Works perfect with the otterbox defender case. Highly recommend this screen protector
I'll be buying one of the screen protectors soon
Man you rock!! You help me thru from a to z and got it done. Thanks mate
Glad the video was able to help you out!!
how thick is this screen protector? or rather, how far out of the sides of the screen does it stick out? would it make it difficult to put on rugged cases like the UAG for example or will it accommodate any case perfectly fine?
Nice job! Easy to follow, perfect install!
Thanks I appreciate it!
How long do you wait for the glue? I bought and returned them. The first screen got what I thought was a bubble under come to find out I was able to scratch the "glass" with my thumb nail. The 2nd one I did later that night and I think I didn't wait long enough. The liquid moved and covered everything but then it kept oozing out so I pulled it off
thank you so much for this I really needed to go through this w/someone and you were super level-headed and straight
Thanks for this one man! I screwed up a bit the first time I tried but luckely I got a 2-pac. The other one went one, no problem and finger print works just fine! But great video, very clear!
Yeah that's the good thing about the two pack. Just in case you mess one up you're good. Glad the video helped you out.
Great video but WARNING!!! I created a trapped air bubble by tapping on the glue too much. The last drop from tapping created an air bubble so I had to start all over with the second screen protector after cleaning everything off the phone. On my second attempt I tapped lightly once. Removed the glue harness very carefully. The results are amazing. So, if you see an air bubble try popping it with a needle / toothpick before continuing. If that doesn't work paper towel the glue off, clean everything up and start again because if you commit dropping the glass on it hopping to push it out it does not work. Oh, one last thing make sure the table surface is very level it makes a big difference on how the glue settles. Mine was not level so I used a couple of credit cards to make the tray level on my table.
Do you want to experience true level?
What a fantastic video. Really appreciate the vid, extremely useful, just followed your instructions step by step and the install went very smoothly. Thanks very much.
Best screen protector for smartphones period. Great tutorial of the installation, I'm behind the game on getting the S22 Ultra, but finally got mine today, same color as yours. Now time for the screen protector installation 👍
Thanks Big John 💪🏽💪🏽
Thanks for the video just got one of the and opened the box saw everything and jumped straight to UA-cam
Excellent content. Thank you my friend.
Question about registering fingerprints....my S22 Ultra (Burgundy) is arriving next week - I
am planning on installing this first thing when I take the phone out of the box...even before powering on, activating & setting up. I would assume installing this first then registering Fingerprints during the initial setup would work the same?? (Without first registering a set before the WD install)
Thanks I appreciate it. I had mine registered and after the install, I deleted them and re did them so technically you can do a fresh install and then register them afterwards.
Man, this is an absolutely hellish process and I ended up with a tiny bubble speck where the glue is initially dropped. Also, can't stress your work station being level enough! The glue moves rapidly at the slightest tilt!
Yeah def have to make sure you are somewhere level for sure. The process seems crazy but once you get use to it, it's not that bad lol.
Same thing happened to me, tiny bubble near where the glue dropped
This happened to me as well. I decided to just leave it, but I wish I knew how to avoid it happening again...
Same here...Tiny Bubble!
Well done. In the event that not all the adhesive covers the screen and leaves an unglued area (had this problem), how would you correct this?
BEST install video ever!!! I wish I had seen this before I got glue all over myself.
Hey man do you still have it on the phone? How is it holding up?
I wanna get one but there are so many negative reviews with sudden chips, lifting, fingerprintreader issues... I wonder if they are user installation errors, bad luck or bad quality control. For this money I would like the protector to last and I am worried/skeptical
This is an awesome instructional video. Very detailed and great with the steps. Thank you for this!
No problem and glad it was able to help you out!!
This video is miles better than the no-sound original video 5 ☆ and new subscriber
Super helpful walkthrough. Just put mine on while watching. Appreciate it!
Glad it was able to help you out!
Thank you so much for this man, when I opend the box the first thing I thought was "crap what did I get myself into"
Great video! Does this company have a privacy screen protector w/ fingerprint support for the s22 ultra?
Thx for the video just ordered a WD glass for my S22 Ultra deffo will play this video again on my tab whilst installing it 👍✌️
For the record, followed your instructions..perfect install fingerprint scanner works flawless thx
This tutorial is the best. Thank you so much.
Awesome video. Thanks to your great advice I bought this screen protector. It has been installed perfectly, without fingerprint marks or bubbles, however I have problems with the fingerprint sensor. Any way to fix it? I'm going crazy from so many authentication failures. Thank you very much Tee!
Thanks much appreciated. It's crazy I'm hearing so many people with issues. I'm going to make a video talking about all these issues because I have no issues with my FPS.
You are awesome. Whether ibuy the product or not, thank you for this great tutorial! I mean it!
Thanks I appreciate that!