Here is an tip: The cotton absorption pads can shed tiny particles on the screen. To prevent this, take your thumb and index finger and rub the absorption pads for a few seconds to get rid of any fragments that might fall off the pads and onto your screen.
Your instructions have helped me install my whitestone dome screen perfectly. Your pacing and instructions are impeccable. You have removed my fear and stress of installing this very intimidating screen protector. Bravo 👏
Totally. It really seemed like a loaded gun with those horror stories of broken phones when installed incorrectly. If u do it exactly like described here it'll work out beautifully.
This is detailed step by step tutorial, review and test of the whitestone dome glass screen protector for the Samsung Galaxy Note 20 Ultra. Full index can be found in the Show more area.
Sir, how is the clearity of back camera protector? Can you rate it out,while using the camera with Flash.Does it give a pale shade in the very captured picture.?Which is indubitably, a prevalent problem in all full sized camera protection films.Thanks
In your video when the screen was off at 15:33, I could see a "cutout" (change in reflectivity) for the fingerprint sensor. Can this be seen when the screen is on? I have a protector now that has this and it drives me insane. Was this just an oily fingerprint you left behind after touching it? I hope so.
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.
This screen protector is garbage. Had it way back on my S10+ for less than 1 week. The adhesive from the side will eventually start to collect dust and the fingerprint sensor is a hit or miss. Definitely not worth it for $95.
you probably didn't install in correctly. I had mine on my galaxy 9 plus for 2+ years and the adhesive never came off.the only time it started lifting was when i dropped it and it cracked then it was downhill from there but it at least lasted 2 years
Treated this like phone surgery. Followed your advice- Watched video 2 times prior to get familiar with parts and fit- and replayed your steps as I installed it, and It came out Perfect! Thank you for the video. Using UAG Monarch Carbon Fiber with CF skin on the back. Basically requires meticulous attention to detail.
I was unsure about this screen protector and the installation process. You put together a better installation video that Whitestone. Thank you so much for taking the time to put this together.
Thanks so much for making this! Watched it through and then followed it through again with the actual install on my Note 20 Ultra - it went perfectly thanks to your video! I appreciate it. I've never installed a Whitestone Dome before, but it seems like a must for Samsung devices.
Just a caution to everyone out here. Do not buy from retailers that open the packaging, because any missing part will screw up the installation. Make sure you get a sealed package. I just found that mine came without the fluid because the packaging was open. Apparently, the retailer had used the installation kit previously. Just exercise due diligence. This whitedome film is not installed simply like the usual tpu films.
Excellent guide used it yesterday. Fingerprint works fine. Though not realizing that the screen protector is a tad bit lower than where it's supposed to be. From the top, like a quarter thick of the top is not protected.
This is a great tutorial that is clear and concise, and spaced out nicely with perfect timing. The video is well done, too, with close-ups and easy to see. THANK YOU! On my first attempt, I watched a different video after reading the instructions, and the attempt failed. It was a huge mess! Bummer. I was afraid to try it again. But when I found this tutorial and watched it, I felt better about giving it another go. I took the daring leap and went ahead. This second time worked much better! Perfect, actually, although I did a second one-minute cure. I can't even tell a protective screen on ~ I love it. S-pen works perfectly, as do my fingerprints. 👍👏🏼🙏 ** I do want to point out that if anyone has anything on the back of their phone, such as EMF protectors, for example, REMOVE them first before you start the process. They will throw off the liquid adhesive's centering and movement, and you'll have a disaster on your hands. I hope that helps!
Just completed the installation with your guide. The most difficult part for me was guiding the adhesive in the middle lol. That was time consuming but I guess worth it in the end. Thank you!
Those camera covers suck ! Try to take a picture with flash and it will have a haze to the picture. I'm speaking from experience on my N20U. The screen protector has been perfect for me so far though.
Good instructions, helpfull to see how its done. Tip from me, dont ever work above the object. This could cause items drop on top or to get dirt/dust stuck in the glue.
The biggest problem was that the screen shield totally moved up when I pulled that black tab back. Luckily I was able to readjudt it in time before the liquid spread out too much.
The fingerprint scanner works perfectly, the screen feels great, very smooth. It comes with 2 screen protectors so I was able to apply for 2 phones. Definitely would recommend.
After you touched the fingerprint sensor I noticed there is a spot on the glass when the screen turned off. I've heard that spot doesn't go away. Is that true?
Hello, EBPMAN Tech Reviews! I know your video is already 2 years old, but your Amazon affiliated link still works! :) I have a little question before I purchase it. My Samsung Galaxy Note 20 Ultra still has it's original screen protection on, but it has light scratches all over, and it started pilling off a little bit. In your video seems like you didn't remove it. Is that okay if I remove mine before I try Whitestone Dome Glass? Thank you!
Hi, very good video.. I have been using my Note 20 Ultra 5G which I received from pre ordering without any screen protector. I am using the Spigen Tough Armor casing. I like to check with you if this will fit?
Yeah I think that happened to me with my Note 10 plus because my speaker was crackling a little bit and for a long time I'm thinking they gave me a defective unit but then after installing another one of these screen protectors that's when I thought oh man I probably got glue in it hahaha
mine didn't push the glue all the way to the edges, that's a firs for whitestone... the Galaxy Note 205G and it made it to top corner but the other top corner it didn't make it to and the bottom totally didn't get the glue ,,, followed instructions and the glue was in the bubble but the screen protector got hung up on the top of this contraption and I didn't notice until glue started spreading then pushed the top of phone screen down and pulled top plug thing and glue never made it to top rt of screen or bottom... sad... I didn't READ the instructions in the BOX... I would have seen the instructions on NOT TO DO THIS NEXT TO A WINDOW... UV light comes in... And causes the glue to cure...
Thank you so much. I have been buying cheap screen protectors and they keep messing with the fingerprint reader. I can't seem to find one that works properly with the fingerprint reader. This is a problem because all of my banking apps use fingerprint authentication. And if it detects a mis-read fingerprint while trying to access bank accounts a certain number of times it will delete all my login information for banking and force me to log into my bank all over again... and it's pain in the ass. So I'm plurging on this one. It's comes tomorrow
Does anyone else have issues with the fingerprint sensor not working with Whitestone Dome?? I've deleted my old fingerprints and increased my screen sensitivity and my Note20 Ultra still can't register my prints. 😫😫
Be careful of warm weather changing the viscosity of the adhesive, can mess you up when it's too thin. Had to do some fiddling as the bubble spread way too wide when dropping onto the screen, which caused a bubble to appear when dropping the protector down.
Note: for all that is sacred and holy, make sure the damn the tab you pull to allow the protector to sit on the screen is in all the way before placing the screen on it! Mine came out a bit, allowing the protector to go under the plastic template and screwing the whole thing up!! Thankfully I got a two pack or I would've been way too frustrated!
Whitestone screen protector is expensive but it comes with lifetime warranty. If you break it, or it has chips or Crack. Just pay $9 for shipping and they will send you new one
Here is a pro tip. Don't buy this garbage screen protector. It's not worth the hassle or risk of fucking up your phone to get a regular ass cheap screen protector to glue to your phone. Get a screen protector that doesn't take perfect NASA laboratory conditions to put on and a certain amount of luck. You think this guy did this on his first try? No. And I guarantee he has little specks all under every phone protector where those dumbass cotton strips are. It's an absolutely mind numbingly stupid process for something so simple. And, that's if you don't let the glue leak all over the sides and back of your phone if your surface isn't level and you destroy a part of your phone for a Chinese piece of over rated junk.
interesting but my fingerprintsensor does not work anymore after installing the whitestone protector. how can this be possible? I have put the screensensitivity on high and I tried to reinstall my fingerprints, but ist does not work. Any suggestions?
Somebody gave me this tip along time ago.... Go into the bathroom and run the hot shower for like 5 minutes. The steam will knock all the dust out of the air. Then do your install im there with no worries about dust particles on your screen!
The kit came with two screen protectors and two tubes of adhesive, but there is only one set of tape covers, so I can't install the second protector. I tried using tape but it's too thick and doesn't allow to phone to fit into the tray. I just checked Whitestone's website and I don't see any of those parts sold separately. I just removed my damaged protector because I thought I could install the second one...
my concern is putting glass and the liquid adhesive on the glass and on top of the camera which is more that the light has to pass thru to get to the camera sensor? Has anyone ever tested the camera before and after applying?
I have a few spots on my device that look like either very tiny air bubbles or maybe some debris so I'm a little bummed about that. Is this normal or did I not clean properly? Will they go away if they are air bubbles?l
Hey how are you? I used your video, really detailed and like, clean install in first try. Is ok for me to put it on my amazon review, so more people have the same expirience?
Installation for this screen protector is so hit or miss. I followed the instructions EXACTLY as printed and watched three different videos and there wasn't enough adhesive that came out of the black tube to reach one of my phones corners (waited the full 80 seconds). This was on a totally flat surface and the adhesive bubble was perfectly centered under the guide when I removed the tab. So I tried to press down to get the adhesive to that corner and it created micro bubbles that are impossible to remove. And I also notice the screen protector moves a lot vertically when on the phone when the adhesive isn't cured. The clear plastic guide has TERRIBLE tolerances and the two triangle guide protrusions to center the screen protector vertically located on the top and bottom of the top guide when the top guide is securely fitted to the bottom guide. These poor tolerances allow the screen protector to go under the triangle tabs and move vertically. I also noticed that the screen protector edges aren't curved enough to properly fit my Note 20 Ultra and are slightly "lifted" from the edges of the phone. Overall I cannot believe I spent $65 on something that his this shoddy of an installation procedure. Almost want to rip it off and throw it away. You always learn that more expensive doesn't always equal better.
Sorry to hear that. I have mine on my note 20 ultra and it's still solid. I havr a cheaper alternative coming this week. So stay tuned. I have installed them before too and they are really good
ive done this three times now and i swear im doing it perfectly but it always messes up. Tried to contact support since they have a life time warrenty and because they cost more than any other screen protector. They wont even respond. I dont care how good they are if you install correctly i wont reccommend a company with support like that to anyone.
Why no S22 Ultra Whitestone dome install videos? Your Whitestone videos are the best I've watched a lot of videos for a lot of different phones and yours beat them all! Please make one for the S22 Ultra
It's nit that hard and it's fool proof. Perfect install everytime. No bubbles, dust particles ever. I've never had the pros install the the other protectors without bubbles or dust issues.
Mike I have them on all our phones. No issues. But glass is glass. You drop them often the will break. But our 4 phones have never had a cracked screen since having these. All out phone have them. I have had to replace them because my kids are hard on phones. But no phones screens are damaged.
I got a little glue in the bottom bezel. I flipped. But I just took a little thin piece of hard plastic it came right out. I have phone OCD. Be aware this screen protector does not cover the whole screen. There is a gap on the bottom for those who don't use a case. This is Otterbox Defender Pro Compatible. To put the iceing on the cake I dropped my phone while doing the installation but I caught it with my feet. Whoo....I would of hit the ceiling if I cracked my 1400$ phone while trying to install something to protect it from exactly what I just did. If you follow this guy's directions to a T..Your good.
UAG Monarch works perfectly with the whitestone. Tried out the Plasma series and it works as well! Just that I own the Monarch, have been using it for 1 month, dropped it a couple of times, doesn't push the glass. Stay away from Spigen, went down to a shop and tried them on, edges of the glass are REALLY close to the case lip. Too close for comfort.
If anyone uses the Zero Lemon battery pack case, I'll be adding this to mine this week and will know if it will work. The Zero Lemon is very similar to the Mophie Juice Packs, but they didn't make them for the Note20 so I had to shop around. I've only had it for a few days, but so far I think it's better than Mophie. 1 piece, rubberized, works the same way. Mine is the 5000 mah and they have a 10,000 but obviously more bulk. Costs less than Mophie too. 👍
Excellent guide, helped me to install the glass protector perfectly, the first try. However, judging by your video, mine glass is a good 1.5-2 mm shorter, then yours. Bought it directly from the Whitestone site. With a discount though, maybe the batch was defective, or something.
Just followed all your tutorial and installed the Dome Glass on my Note 20 Ultra. It is really helpful, thank you very much! Just like to point out I bought the Dome Glass from Mobile fun and it only came with one protector with the cost of £45!! Should have double checked before I ordered as Amazon is offering £39 for two.
Hey good vid. I installed my screen protector today on my note 20 ultra and now my finger print is slow and alot of hit or miss. Is there a quick fix that doesn't require me to register fingerprints again? I got my phone new in August and registering again causes all kinds of havoc on the banking apps
1 question. I know the UV light cures the liquid to turn it to glass but you only cured the top and bottom. What about the center area. Whitestone used to instruct you to do the entire screen surface, not just top and bottom. How does the center area turn to glass w/o using the light on it ?
Just got my 2 in (got my 2nd Note 20 UW last night) and watching again. I did have to remove the protector on an S10 before and reinstall, but it's a PAIN to get all the Mica solution off the protector. Another improvement is an optional 1-minute timer on the light. Last time I tightly wrapped electrical tape around the power buttons on 2 lights and left them across the phone for a longgggg time lol.
Thanks for the guide, definitely more helpful than the paper guide. Their would be less Amazon complaints if more people would see this video before installing. FYI everyone, it is compatible with a dbrand grip case and skins, the screen protector doesn't get in the way of the case. I also definitely recommend getting the camera screen protector while your at it, it also maintains a flush, flat fit with a dbrand grip case on the back, even with the camera skin on top of it. Dbrand Skin + Grip Case + Whitestone Dome Glass Screen Protector = ultimate stylish protection. Definitely what I'm going to stick with for now on. You definitely get what you pay for, and with a 1k phone, why cheap out on the protection?
thank you so much i did this with my note 20 about 2 months ago and it was perfect, the whole kit looked intimidating lol. But sadly i broke that phone so just got the note 20 ultra, everything went smooth for me but this time I do have 2 tiny dots. you only see it if your really looking but it kinda bugs me. I guess my lesson is dont leave your phone in your hoodie pocket while messing around on your dirt bike.
Good howto video. However, you failed to mention the protector does not cover the entire screen. Too short. Whitestone Dome has really deteriorated badly.
This was a damn near perfect tutorial... As many have already stated, it was definitely intimidating but if you follow this tutorial step by step, you will be successful... That was my experience, anyway.
So excited to get and install my Whitestone Dome glass on my Note 20 Ultra...then opened box to find BOTH screen protectors shattered 😭. Finding that Whitestone support is crap. They don't reply to emails nor have a phone number to call them. May have a great product but I'd support is lacking then just not worth the time or money 💰
Probably should take the pen out first. What if you have bubbles after applying the screen onto the liquid? Is okay to push it around with a credit card or something
The key is to have bubble free before you cure if you have a bubble you need to remove and reapply the liquid. You need to clean off the screen well and protector
Thank you sir, your video helped me install my white stone protector on my note 20 ultra. I did end up failing on the first attempt, only because when I attempted to align the screen protector to the bottom of the phone the protector went slightly under the upper plastic guide which caused the protector to be placed slightly lower than it was supposed to be. I tried correcting it by moving it around slightly before curing and this only made things worse. Luckily it came with 2 protectors so I made sure the 2nd time around to hold down the upper plastic portion onto the lower plastic base so that the screen protector wouldn't slide underneath during placement.
Great video! I use the Whitestone dome screen protector on my S20+. I also use the Otterbox Defender Pro. I have had no problems with the screen protector coming up! Thanks for sharing! Have a great and awesome day!
One tip you want to tell users. I've failed at 2 replacements the last 2 weeks. One I had the protector up too far. In future videos you may want to mention for the user to put the protector on right side up. I just failed again putting one upside down and have to reorder replacements.
I always considered myself a expert at installing screen protectors. Just got this one followed your video exact and it still didn'nt go well. This is an absolute disaster to get perfect. I wasted so much money and time:(
Thanks for video it was helpful. I followed your instructions to the T but am noticing some grainy/rainbow areas on my screen. I've read this indicates the adhesive has not dried. Have you experienced this? No matter how many times a uv cure those areas it doesn't seem to get rid.
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Here is an tip: The cotton absorption pads can shed tiny particles on the screen. To prevent this, take your thumb and index finger and rub the absorption pads for a few seconds to get rid of any fragments that might fall off the pads and onto your screen.
Your instructions have helped me install my whitestone dome screen perfectly. Your pacing and instructions are impeccable. You have removed my fear and stress of installing this very intimidating screen protector. Bravo 👏
Good job sweet 💙 heart 😃
Totally. It really seemed like a loaded gun with those horror stories of broken phones when installed incorrectly. If u do it exactly like described here it'll work out beautifully.
Why don't you cure the middle of the phone with UV-light?
This is detailed step by step tutorial, review and test of the whitestone dome glass screen protector for the Samsung Galaxy Note 20 Ultra. Full index can be found in the Show more area.
Sir, how is the clearity of back camera protector? Can you rate it out,while using the camera with Flash.Does it give a pale shade in the very captured picture.?Which is indubitably, a prevalent problem in all full sized camera protection films.Thanks
@@FarhanAli-xy5km I took some pics and have not noticed anything different with and without flash. I have not tested night shots only
@@ebpman Thanks Sir
This saved me from near-cardiac arrest trying to install this thing. THANK YOU!
I am glad this helped
Does the Dome glass fits perfectly with Spigen Tough Armor? Thanks in advance.
In your video when the screen was off at 15:33, I could see a "cutout" (change in reflectivity) for the fingerprint sensor. Can this be seen when the screen is on? I have a protector now that has this and it drives me insane. Was this just an oily fingerprint you left behind after touching it? I hope so.
*you wanna make sure all fans are off*
except for the PC RGB dust collector fans in the background. Keep those on.
WARNING THIS CAN DAMAGE YOUR PHONE IS SOMETHING GOES WRONG: These whitestone screen protectors damaged a few phones displays of a Samsung Galaxy S21 Ultra, & Note 20 Ultra I installed it on. The UV Glue got past the absorbing pads and got in between where the Glass display meets the metal frame and cause a permanent large dark spot inside the display on both phones. It damages the displays. Had to pay Samsung $700.00 to replace two displays for two brand new out the box galaxy phones. They wouldn't cover the phones under warranty because the said the glue is considered as liquid damage.
Don't get it why not just drop the liquid in the center?
This screen protector is garbage. Had it way back on my S10+ for less than 1 week. The adhesive from the side will eventually start to collect dust and the fingerprint sensor is a hit or miss. Definitely not worth it for $95.
you probably didn't install in correctly. I had mine on my galaxy 9 plus for 2+ years and the adhesive never came off.the only time it started lifting was when i dropped it and it cracked then it was downhill from there but it at least lasted 2 years
Treated this like phone surgery. Followed your advice- Watched video 2 times prior to get familiar with parts and fit- and replayed your steps as I installed it, and It came out Perfect! Thank you for the video. Using UAG Monarch Carbon Fiber with CF skin on the back. Basically requires meticulous attention to detail.
I was unsure about this screen protector and the installation process. You put together a better installation video that Whitestone. Thank you so much for taking the time to put this together.
Thanks so much for making this! Watched it through and then followed it through again with the actual install on my Note 20 Ultra - it went perfectly thanks to your video! I appreciate it. I've never installed a Whitestone Dome before, but it seems like a must for Samsung devices.
Cool. Glad it worked
Hi!
16:35 does it affect the result of the photos? will it be more blurry?
2:35
Just a caution to everyone out here. Do not buy from retailers that open the packaging, because any missing part will screw up the installation. Make sure you get a sealed package. I just found that mine came without the fluid because the packaging was open. Apparently, the retailer had used the installation kit previously. Just exercise due diligence. This whitedome film is not installed simply like the usual tpu films.
Thank you for nice Video ! Awesome :)
Wait, hello
Excellent guide used it yesterday. Fingerprint works fine. Though not realizing that the screen protector is a tad bit lower than where it's supposed to be. From the top, like a quarter thick of the top is not protected.
Hmm. That's odd. Does it look the same as mine?
Super detailed video as usual. Really appreciate you making these! 👍
This was legitimately one of the 50 best how-to videos I've ever seen 👏🏾
This is a great tutorial that is clear and concise, and spaced out nicely with perfect timing. The video is well done, too, with close-ups and easy to see. THANK YOU! On my first attempt, I watched a different video after reading the instructions, and the attempt failed. It was a huge mess! Bummer. I was afraid to try it again. But when I found this tutorial and watched it, I felt better about giving it another go. I took the daring leap and went ahead. This second time worked much better! Perfect, actually, although I did a second one-minute cure. I can't even tell a protective screen on ~ I love it. S-pen works perfectly, as do my fingerprints. 👍👏🏼🙏 ** I do want to point out that if anyone has anything on the back of their phone, such as EMF protectors, for example, REMOVE them first before you start the process. They will throw off the liquid adhesive's centering and movement, and you'll have a disaster on your hands. I hope that helps!
White shoes... calm down.
Just completed the installation with your guide. The most difficult part for me was guiding the adhesive in the middle lol. That was time consuming but I guess worth it in the end. Thank you!
Those camera covers suck ! Try to take a picture with flash and it will have a haze to the picture. I'm speaking from experience on my N20U. The screen protector has been perfect for me so far though.
Completely agree. Get one from Amazon where they have cutouts for the flash and laser focus
@@Jrac86 Even the ones with cutouts produced a haze in the photo when using a flash
@@1azflygrl The Caseology ones don't.
@@7DeStRoYeR9 I'll check out the Caseology ones
If you continue to watch this video, you could tell it’s very easy to install.......
Good instructions, helpfull to see how its done. Tip from me, dont ever work above the object. This could cause items drop on top or to get dirt/dust stuck in the glue.
The biggest problem was that the screen shield totally moved up when I pulled that black tab back. Luckily I was able to readjudt it in time before the liquid spread out too much.
Does this work with Unicorn beetle cases?
The fingerprint scanner works perfectly, the screen feels great, very smooth. It comes with 2 screen protectors so I was able to apply for 2 phones. Definitely would recommend.
Play the "Mission Impossible" theme in the background, when placing the bridge on top while with your body being suspended from the ceiling. :D
After you touched the fingerprint sensor I noticed there is a spot on the glass when the screen turned off. I've heard that spot doesn't go away. Is that true?
Hello, EBPMAN Tech Reviews! I know your video is already 2 years old, but your Amazon affiliated link still works! :) I have a little question before I purchase it. My Samsung Galaxy Note 20 Ultra still has it's original screen protection on, but it has light scratches all over, and it started pilling off a little bit. In your video seems like you didn't remove it. Is that okay if I remove mine before I try Whitestone Dome Glass? Thank you!
Hi, very good video.. I have been using my Note 20 Ultra 5G which I received from pre ordering without any screen protector. I am using the Spigen Tough Armor casing. I like to check with you if this will fit?
Thank you for making this video! I was able to do a perfect install on my note 20 ultra! This was my first time and your video was extremely helpful!
When youre not carefull install, glue inside your speaker and boom! Magic happens
Yeah I think that happened to me with my Note 10 plus because my speaker was crackling a little bit and for a long time I'm thinking they gave me a defective unit but then after installing another one of these screen protectors that's when I thought oh man I probably got glue in it hahaha
mine didn't push the glue all the way to the edges, that's a firs for whitestone... the Galaxy Note 205G and it made it to top corner but the other top corner it didn't make it to and the bottom totally didn't get the glue ,,, followed instructions and the glue was in the bubble but the screen protector got hung up on the top of this contraption and I didn't notice until glue started spreading then pushed the top of phone screen down and pulled top plug thing and glue never made it to top rt of screen or bottom... sad... I didn't READ the instructions in the BOX... I would have seen the instructions on NOT TO DO THIS NEXT TO A WINDOW... UV light comes in... And causes the glue to cure...
Thank you so much. I have been buying cheap screen protectors and they keep messing with the fingerprint reader. I can't seem to find one that works properly with the fingerprint reader. This is a problem because all of my banking apps use fingerprint authentication. And if it detects a mis-read fingerprint while trying to access bank accounts a certain number of times it will delete all my login information for banking and force me to log into my bank all over again... and it's pain in the ass. So I'm plurging on this one. It's comes tomorrow
Thank you so much for your tutorial. I followed your instructions step by step. Very well explained and worked first time. 👏🏽
Does anyone else have issues with the fingerprint sensor not working with Whitestone Dome?? I've deleted my old fingerprints and increased my screen sensitivity and my Note20 Ultra still can't register my prints. 😫😫
Be careful of warm weather changing the viscosity of the adhesive, can mess you up when it's too thin.
Had to do some fiddling as the bubble spread way too wide when dropping onto the screen, which caused a bubble to appear when dropping the protector down.
Very nice video! Thank you so much for your time and help in installation of Dome Glass. It was very helpful!
Note: for all that is sacred and holy, make sure the damn the tab you pull to allow the protector to sit on the screen is in all the way before placing the screen on it! Mine came out a bit, allowing the protector to go under the plastic template and screwing the whole thing up!! Thankfully I got a two pack or I would've been way too frustrated!
Whitestone screen protector is expensive but it comes with lifetime warranty. If you break it, or it has chips or Crack. Just pay $9 for shipping and they will send you new one
Here is a pro tip. Don't buy this garbage screen protector. It's not worth the hassle or risk of fucking up your phone to get a regular ass cheap screen protector to glue to your phone. Get a screen protector that doesn't take perfect NASA laboratory conditions to put on and a certain amount of luck. You think this guy did this on his first try? No. And I guarantee he has little specks all under every phone protector where those dumbass cotton strips are. It's an absolutely mind numbingly stupid process for something so simple. And, that's if you don't let the glue leak all over the sides and back of your phone if your surface isn't level and you destroy a part of your phone for a Chinese piece of over rated junk.
interesting but my fingerprintsensor does not work anymore after installing the whitestone protector. how can this be possible? I have put the screensensitivity on high and I tried to reinstall my fingerprints, but ist does not work. Any suggestions?
Somebody gave me this tip along time ago.... Go into the bathroom and run the hot shower for like 5 minutes. The steam will knock all the dust out of the air. Then do your install im there with no worries about dust particles on your screen!
That's just wayyyyyyyy to much trouble doing all of that give me a good traditional screen protector and I'm good
The kit came with two screen protectors and two tubes of adhesive, but there is only one set of tape covers, so I can't install the second protector. I tried using tape but it's too thick and doesn't allow to phone to fit into the tray. I just checked Whitestone's website and I don't see any of those parts sold separately. I just removed my damaged protector because I thought I could install the second one...
This is an excellent video sir. Whitestone should use this video on their website. The production quality is phenomenal. Thank you
my concern is putting glass and the liquid adhesive on the glass and on top of the camera which is more that the light has to pass thru to get to the camera sensor? Has anyone ever tested the camera before and after applying?
I have a few spots on my device that look like either very tiny air bubbles or maybe some debris so I'm a little bummed about that. Is this normal or did I not clean properly? Will they go away if they are air bubbles?l
Hey how are you? I used your video, really detailed and like, clean install in first try. Is ok for me to put it on my amazon review, so more people have the same expirience?
How do i get/install that background screensaver"Not Apple it's Samsung"
Installation for this screen protector is so hit or miss. I followed the instructions EXACTLY as printed and watched three different videos and there wasn't enough adhesive that came out of the black tube to reach one of my phones corners (waited the full 80 seconds). This was on a totally flat surface and the adhesive bubble was perfectly centered under the guide when I removed the tab.
So I tried to press down to get the adhesive to that corner and it created micro bubbles that are impossible to remove. And I also notice the screen protector moves a lot vertically when on the phone when the adhesive isn't cured. The clear plastic guide has TERRIBLE tolerances and the two triangle guide protrusions to center the screen protector vertically located on the top and bottom of the top guide when the top guide is securely fitted to the bottom guide. These poor tolerances allow the screen protector to go under the triangle tabs and move vertically.
I also noticed that the screen protector edges aren't curved enough to properly fit my Note 20 Ultra and are slightly "lifted" from the edges of the phone. Overall I cannot believe I spent $65 on something that his this shoddy of an installation procedure. Almost want to rip it off and throw it away. You always learn that more expensive doesn't always equal better.
Sorry to hear that. I have mine on my note 20 ultra and it's still solid. I havr a cheaper alternative coming this week. So stay tuned. I have installed them before too and they are really good
I've used it on the note 9, 10 plus and 20 ultra and never had an issue with the adhesive.
Omg, that thing cracked around the edges in less than 2 months. I spent an hour trying to get all the little pieces off. Don't buy.
ive done this three times now and i swear im doing it perfectly but it always messes up. Tried to contact support since they have a life time warrenty and because they cost more than any other screen protector. They wont even respond. I dont care how good they are if you install correctly i wont reccommend a company with support like that to anyone.
Thank you you made a excellent video for putting on the screen protector it helped me out alot
I can't get my fingerprint scanner to work after the install. It would not register my print again
Why would you pour liquid on your £1300 or $1300 phone crazy 😜 lol 😂
Thanks for your amazing review for Whitestone
These Note 20 Ultra glass screen protectors also fit the S22 Ultra
What a rubbish product, would not recommend at all!
Why no cure for the middle of screen? Just top and bottom
shitty product, screen cracked when i toke it in my hand.
You talk way too much before doing the job.
You made it easy for me, thanks
Probably should take the pen out first
I recommend Whitestone to EVERYONE!! They are spectacular from a technical and a "standard" perspective.
On all my phones!
Awesome, very straight forward
Why no S22 Ultra Whitestone dome install videos? Your Whitestone videos are the best I've watched a lot of videos for a lot of different phones and yours beat them all!
Please make one for the S22 Ultra
Working on it now. Thanks for asking
Excellent tip on the power bank!!!!
Where did you get the wallpaper that says "not Apple it's Samsung"... I love it!
Wayyyyyy too complicated for a screen protector!
It's nit that hard and it's fool proof. Perfect install everytime. No bubbles, dust particles ever. I've never had the pros install the the other protectors without bubbles or dust issues.
These are a rip -off they do not last long are are not durable. Stay away!!!!!
Mike I have them on all our phones. No issues. But glass is glass. You drop them often the will break. But our 4 phones have never had a cracked screen since having these. All out phone have them. I have had to replace them because my kids are hard on phones. But no phones screens are damaged.
I got a little glue in the bottom bezel. I flipped. But I just took a little thin piece of hard plastic it came right out. I have phone OCD. Be aware this screen protector does not cover the whole screen. There is a gap on the bottom for those who don't use a case. This is Otterbox Defender Pro Compatible. To put the iceing on the cake I dropped my phone while doing the installation but I caught it with my feet. Whoo....I would of hit the ceiling if I cracked my 1400$ phone while trying to install something to protect it from exactly what I just did. If you follow this guy's directions to a T..Your good.
This guy is intense.
Any word on whether or not the Otterbox Defender Pro works with this? Trying to find a case BEFORE purchasing.
Dont have that case yet
UAG Monarch works perfectly with the whitestone. Tried out the Plasma series and it works as well! Just that I own the Monarch, have been using it for 1 month, dropped it a couple of times, doesn't push the glass. Stay away from Spigen, went down to a shop and tried them on, edges of the glass are REALLY close to the case lip. Too close for comfort.
Yes. it works
If anyone uses the Zero Lemon battery pack case, I'll be adding this to mine this week and will know if it will work. The Zero Lemon is very similar to the Mophie Juice Packs, but they didn't make them for the Note20 so I had to shop around.
I've only had it for a few days, but so far I think it's better than Mophie. 1 piece, rubberized, works the same way. Mine is the 5000 mah and they have a 10,000 but obviously more bulk. Costs less than Mophie too. 👍
Excellent guide, helped me to install the glass protector perfectly, the first try. However, judging by your video, mine glass is a good 1.5-2 mm shorter, then yours. Bought it directly from the Whitestone site. With a discount though, maybe the batch was defective, or something.
Just followed all your tutorial and installed the Dome Glass on my Note 20 Ultra. It is really helpful, thank you very much! Just like to point out I bought the Dome Glass from Mobile fun and it only came with one protector with the cost of £45!! Should have double checked before I ordered as Amazon is offering £39 for two.
Hey good vid. I installed my screen protector today on my note 20 ultra and now my finger print is slow and alot of hit or miss. Is there a quick fix that doesn't require me to register fingerprints again? I got my phone new in August and registering again causes all kinds of havoc on the banking apps
Aaaaaand I f**ked it up.
I am spanish.
1 question. I know the UV light cures the liquid to turn it to glass but you only cured the top and bottom. What about the center area. Whitestone used to instruct you to do the entire screen surface, not just top and bottom. How does the center area turn to glass w/o using the light on it ?
Just got my 2 in (got my 2nd Note 20 UW last night) and watching again. I did have to remove the protector on an S10 before and reinstall, but it's a PAIN to get all the Mica solution off the protector.
Another improvement is an optional 1-minute timer on the light. Last time I tightly wrapped electrical tape around the power buttons on 2 lights and left them across the phone for a longgggg time lol.
Thanks for the guide, definitely more helpful than the paper guide. Their would be less Amazon complaints if more people would see this video before installing. FYI everyone, it is compatible with a dbrand grip case and skins, the screen protector doesn't get in the way of the case. I also definitely recommend getting the camera screen protector while your at it, it also maintains a flush, flat fit with a dbrand grip case on the back, even with the camera skin on top of it. Dbrand Skin + Grip Case + Whitestone Dome Glass Screen Protector = ultimate stylish protection. Definitely what I'm going to stick with for now on. You definitely get what you pay for, and with a 1k phone, why cheap out on the protection?
thank you so much i did this with my note 20 about 2 months ago and it was perfect, the whole kit looked intimidating lol. But sadly i broke that phone so just got the note 20 ultra, everything went smooth for me but this time I do have 2 tiny dots. you only see it if your really looking but it kinda bugs me. I guess my lesson is dont leave your phone in your hoodie pocket while messing around on your dirt bike.
I wish i saw this video before messing up the first time
Sorry, I do these videos for every type of phone.
@@ebpman I appreciate the comprehensiveness. I got mine installed no problem after your guide. Thanks
Good howto video. However, you failed to mention the protector does not cover the entire screen. Too short. Whitestone Dome has really
deteriorated badly.
This was a damn near perfect tutorial... As many have already stated, it was definitely intimidating but if you follow this tutorial step by step, you will be successful... That was my experience, anyway.
So excited to get and install my Whitestone Dome glass on my Note 20 Ultra...then opened box to find BOTH screen protectors shattered 😭. Finding that Whitestone support is crap. They don't reply to emails nor have a phone number to call them. May have a great product but I'd support is lacking then just not worth the time or money 💰
Probably should take the pen out first. What if you have bubbles after applying the screen onto the liquid? Is okay to push it around with a credit card or something
The key is to have bubble free before you cure if you have a bubble you need to remove and reapply the liquid. You need to clean off the screen well and protector
@@ebpman awesome I'll keep that in mind when I get mine in the mail. Thank you for the quick reply 🙏🤙👍🤘
Thank you sir, your video helped me install my white stone protector on my note 20 ultra.
I did end up failing on the first attempt, only because when I attempted to align the screen protector to the bottom of the phone the protector went slightly under the upper plastic guide which caused the protector to be placed slightly lower than it was supposed to be.
I tried correcting it by moving it around slightly before curing and this only made things worse.
Luckily it came with 2 protectors so I made sure the 2nd time around to hold down the upper plastic portion onto the lower plastic base so that the screen protector wouldn't slide underneath during placement.
The best guide ever!
Great video! I use the Whitestone dome screen protector on my S20+. I also use the Otterbox Defender Pro. I have had no problems with the screen protector coming up! Thanks for sharing! Have a great and awesome day!
Thank you for such detailed instructions. These are complex to install and the manufacturer's instructions are almost useless.
One tip you want to tell users. I've failed at 2 replacements the last 2 weeks. One I had the protector up too far. In future videos you may want to mention for the user to put the protector on right side up. I just failed again putting one upside down and have to reorder replacements.
I always considered myself a expert at installing screen protectors. Just got this one followed your video exact and it still didn'nt go well. This is an absolute disaster to get perfect. I wasted so much money and time:(
Thanks for video it was helpful. I followed your instructions to the T but am noticing some grainy/rainbow areas on my screen. I've read this indicates the adhesive has not dried. Have you experienced this? No matter how many times a uv cure those areas it doesn't seem to get rid.
The quality is excellent. But I don't like the u shaped cutout. Looks like cheap Realme phone after installed.
Dude, that was really clear, great instructions, many thanks, it all went perfectly after watching your video twice. You da man!