How to change front brake discs / front brake rotors on BMW 330i 3 (E92) [TUTORIAL AUTODOC]

Поділитися
Вставка
  • Опубліковано 28 сер 2019
  • How to change front brake discs / front brake rotors on BMW 330i 3 (E92) 3.0 Coupe 01.2005-12.2013 [TUTORIAL AUTODOC]
    Brake discs BMW 1 Hatchback (E81) (09.2006 - 12.2011) / BMW 1 Coupe (E82) (10.2006 - 10.2013) / BMW 3 Touring (E91) (12.2004 - 06.2012) / BMW 3 Saloon (E90) (06.2004 - 12.2011) / BMW 3 Convertible (E93) (05.2006 - 12.2013) cars should be replaced, as a rule, according to one and the same procedure. However, there can be slight differences due to specific features of the vehicle design.
    🔝 Top brands that produce brake discs: RIDEX; STARK; A.B.S.; BOSCH; FEBI BILSTEIN.
    📲 Buying via app is always cheaper than on the website!
    ❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
    🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
    Brake discs: www.autodoc.co.uk/car-parts/b...
    Brake discs for BMW 330i 3: www.autodoc.co.uk/car-parts/b...
    LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
    WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
    LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
    All video and pdf tutorials on BMW 330i 3 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/bm...
    🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ ua-cam.com/users/AutodocUk?s...
    🛠️The tools you need to replace front brake discs:
    - wire brush
    - WD-40 spray
    - brake cleaner
    - anti-squeal paste
    - copper grease
    - HEX bit No.H5
    - HEX bit No.H7
    - drive socket No.17
    - brake caliper wind back tool
    - ratchet wrench
    - torque wrench
    - tap wrench
    - impact screwdriver
    - crow bar
    - fender cover
    - wheel chock
    Was this video helpful? Give it a thumbs-up and share it with your friends!
    Have a look at other videos on our channel:
    ► BMW car repair tutorial - • BMW car repair tutoria...
    ► BMW 330i 3 (E92) car repair tutorial - • BMW 330i 3 (E92) car r...
    ► How to replace air filter on BMW 330i 3 (E92) - • How to change air filt...
    ► How to replace front springs / front coil springs on BMW 330i 3 (E92) - • How to change front sp...
    Mobile Shop: m.autodoc.co.uk
    📢 AUTODOC in social media:
    Facebook: / autodoc.co.uk
    Twitter: / autodoc_berlin
    UA-cam: / autodocuk
    Instagram: / autodoc_autoparts
    #autodoc #autodoctutorial
    Disclaimer:
    This video is intended for informational purposes only and does not guarantee achievement of a specific result.
    It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
    This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
    © 2019 AUTODOC GmbH All rights reserved
  • Авто та транспорт

КОМЕНТАРІ • 6

  • @zanastumasonis
    @zanastumasonis 9 місяців тому

    interesting idea on the copper grease. thx for the video

  • @984SAJ
    @984SAJ 4 роки тому +1

    Good job!

  • @jorisbonson386
    @jorisbonson386 Рік тому

    Just did this and had to drill BOTH the front disc retention bolts 😯

  • @dejesus47
    @dejesus47 2 роки тому

    Awesome 👌

  • @alexey9900
    @alexey9900 4 роки тому

    Good 👍👍👍

  • @AllanO808
    @AllanO808 4 роки тому +1

    You didn't check the guide pins for wear, nor apply copper grease to them or the pad contact points.