I’m in the middle of swapping my 06 2500hd WT interior to a 2003 2500hd LT interior and have run into a lot more trouble that I thought I would. Luckily for me I bought an entire donor cab for the swap. Looking forward to your next video on the process maybe it will help me finish my truck!
Lmc truck has the correct color options for these trucks and others, I ordered through them instead of hassling through the colorbond website for a while, I repaint a lot of stuff and it works great, I recommend colorbond adhesive and colorbond clear coat too👌🏽
Cool to see it allout thanks man! Nice man might splice the front in on my 000 denali. Dont want to mess with the bose, but adding an eq for aux in and rca's thru cdplayer/changer. Nice spot to mount lots of goodies.
For the color matching interior go with SEM Very Dark Pewter, should be an exact match. Look into the process before you do it though so you can do it properly.
Came out awesome man, im going to go with the jumpseat console out of a 07-13 in my 2000 singlecab silverado bud, i found a cheap console for 100 bucks in tan but my truck has the charcoal grey seat, thinking about buying it and painting it man but its just in thought still
Eric, when you are sitting in the truck is the console high enough to rest your arm against it or does it feel like you are having to slump over to reach it? It looks better than a jump seat but a jump seat is comfortable.
It sets high enough to rest your arm on a jump seat sets a lil higher. But if you swap out the seats with tahoe or suburban seats they have a fold down arm rest that will take care of that problem.
great video again keep up the good work did you ever think of taking the rest of the pieces under the main dash and paint them the same color as the center and go with a two tone dash do the kick panel and find a carpet the same color of grey that look pretty dope
I'm doing the same swap I'm my 04 sierra. The only thing I'm doing different is my changing everything over to black. But I thought your console came out good
Super helpful video! I’m wondering if you ever figured out what to do with the gap between the bezel and center console. Mine looks similar and I’ve been brainstorming what I can do about it.
Great video, I’m thinking of doing this to my 2000 Chevy Silverado single cab. I believe same as yours. I’m thinking either do the vinyl paint or a step up and cover with alcantara or suede. Maybe a tad bit more pricey like 100 bucks but what do y I think of a suede center console?
I have a 2001 Chevy Silverado single cab I was trying to do the same thing but my dssh seems like different the glove box outer trim does not come apart it's like a one-piece deal goes all the way across to the driver side, I found a console from a 2001 Chevy Avalanche that has the same one piece - like mine it's the older style two-piece console with the cassette tape deck lol, but I wanted the one piece console from the 03-06 like you did any suggestions on how to get this thing to fit my truck
I know this is a random question, but what size are bolts that bolt all the center console pieces together? Like the ones in the bottom of the storage cubby and top. Got a full size console for my truck but it’s missing the hardware.
Mine doesn't fit like that. My truck is an 01 extended cab and I took the console from an 04 ss silverado. Think because the piece under the radio is still in my truck. I'll try to get it fixed. Crazy I've been rocking it like for years and was too lazy to see what everyone else was doing to overcome this issue
Looks really good. I want to do this with my 98 extended cab but I’m not sure what year donor to look for. Any suggestions? The factory console is pretty useless.
I’m thinking the same for my 95 extended cab. It’d be cool to make those ac vents work to help cool the amps I’m going to run since i took out the rear seat.
You should’ve used a 99-02 center console. Then you’d have 3 charger ports instead of only two, & the console lid has a lock on it. 99-02 consoles also have a cassette player which can be removed & replaced with a 2nd storage pocket.
I see you are still replying to comments so I will make one, I just did this swap but without putting in the console bracket. I have heard that you can install the bracket and then lift the console a little off the ground and install the bolts when the console meets the dash so it looks flush. I can post some links to what I am talking about if you are interested although I know you already did the double din swap so that it covers the gap but still. I haven't tried using the bracket to mate the console and the dash but will being doing that tomorrow hopefully and I will comment and let you know how it went
@@travisloper864 There is a bracket that just bolts into the dash pick up the console as far as you can and bolt it into the bracket. I think I posted some pictures on a truck forum I am on. Maybe I have some on my computer I can't remember It is really easy though and you will notice it instantly
Hi, quick question, I was planning on doing the exact same thing and was wondering if you can still do a console swap if you have the floor shift 4x4, if so what modifications need to be done for it to fit?
I'd like to know how you got the power options to work on your truck... I'm having trouble with mine. I've got the motors and harnesses to properly plug everything in. But not working as it should... Wondering if I need to swap the whole dash out with another one
I know your truck is a single cab so it really don't matter but I wanted to do the swap in a crew cab How hard would it be to make the rear vents work?
Why dont you try a 2 tone interior? Like let the lower half be light colored and the top half be dark. And do all the snap on pieces of the door panels the light color. Some newer trucks come factory that way
@@1740-garage_ like real shit it looks sick but what i did was I took a sample to my local paint store and they pulled a list of original colors for all car interiors
The Silverado console is NOT the same as Tahoe and suburban yes they have the same mounting points and hardware but the cup holder and center storage compartment are different shape and size and Tahoe and suburbans have a locking center console and the Silverado does not. Also the Tahoe and suburban have a rear radio control unit in the rear of the console above the cup holder and the Silverado does not.
Dude.. that two tone actually looks really good.
I have the tan interior and now I think I'm going to two tone it with black.
Great vid.
Great video, perfect way to show how to really take it to the next level.
Thank's for making this video..The console came out very nice!
Thank you
Bro that really came out freaking nice,I really like the color change 💪👍👍👍💯💯💯
I’m in the middle of swapping my 06 2500hd WT interior to a 2003 2500hd LT interior and have run into a lot more trouble that I thought I would. Luckily for me I bought an entire donor cab for the swap. Looking forward to your next video on the process maybe it will help me finish my truck!
Great job in that console looks sic
The two tone actually looks good
Super helpful video !
Lmc truck has the correct color options for these trucks and others, I ordered through them instead of hassling through the colorbond website for a while, I repaint a lot of stuff and it works great, I recommend colorbond adhesive and colorbond clear coat too👌🏽
Thanks for the info man , I got a 99 rado want upgrade interior a bit
GREAT INSTRUCTION VID!
Cool to see it allout thanks man!
Nice man might splice the front in on my 000 denali. Dont want to mess with the bose, but adding an eq for aux in and rca's thru cdplayer/changer. Nice spot to mount lots of goodies.
Looks good buddy nice job my lid want stay idk why
For the color matching interior go with SEM Very Dark Pewter, should be an exact match. Look into the process before you do it though so you can do it properly.
andrewr022488 Chevy interior “122” graphite/very drk pewter
Can any if send a link of how the bottle looks like I bought the wrong one and it came out lighter and it’s peeling
Came out awesome man, im going to go with the jumpseat console out of a 07-13 in my 2000 singlecab silverado bud, i found a cheap console for 100 bucks in tan but my truck has the charcoal grey seat, thinking about buying it and painting it man but its just in thought still
Eric, when you are sitting in the truck is the console high enough to rest your arm against it or does it feel like you are having to slump over to reach it? It looks better than a jump seat but a jump seat is comfortable.
It sets high enough to rest your arm on a jump seat sets a lil higher. But if you swap out the seats with tahoe or suburban seats they have a fold down arm rest that will take care of that problem.
Great video. I have the same model truck and always wondered how that console would look in it. Thanks for all the info on pieces you need to do it.
Nice!
well done sir
Had a brain fart,because thats the intro song that bassjunkie2020 uses and i was thinking WTF is james doing with a silverado console swap lol
"It's getting dark on me", take the shades off!! Geeez
great video again keep up the good work did you ever think of taking the rest of the pieces under the main dash and paint them the same color as the center and go with a two tone dash do the kick panel and find a carpet the same color of grey that look pretty dope
I did the same thing but didn't know I needed to swap out the glove box lid and bracket
So do you have to get a different bcm or how do u wire harness on windows on power conversion
Nice job thanks for the video A++++++++++++++++++++++++++
How did you take out the panel where you connect your charger at?
I'm doing the same swap I'm my 04 sierra. The only thing I'm doing different is my changing everything over to black. But I thought your console came out good
Super helpful video! I’m wondering if you ever figured out what to do with the gap between the bezel and center console. Mine looks similar and I’ve been brainstorming what I can do about it.
Great video, I’m thinking of doing this to my 2000 Chevy Silverado single cab. I believe same as yours. I’m thinking either do the vinyl paint or a step up and cover with alcantara or suede. Maybe a tad bit more pricey like 100 bucks but what do y I think of a suede center console?
Did all 3 12v power outlets get plugged in?
Looks great, how the painted parts hold up?
Do you have a link to the pocket spacer for the rear of the console
Did you ever connect up the Bose in the center console if you did plz lmk how you did it cause I’m trynna do it to mine have the same console
I have a 2001 Chevy Silverado single cab I was trying to do the same thing but my dssh seems like different the glove box outer trim does not come apart it's like a one-piece deal goes all the way across to the driver side, I found a console from a 2001 Chevy Avalanche that has the same one piece - like mine it's the older style two-piece console with the cassette tape deck lol, but I wanted the one piece console from the 03-06 like you did any suggestions on how to get this thing to fit my truck
Hey, how has that paint worked out for you so far?
Do the rear air vents work
Did you do any scuff prep on the plastic or just clean well and paint?
exactly my question
Did you ever find out how to wire that Bose sub?
What if I don’t use the bracket for the center console
I know this is a random question, but what size are bolts that bolt all the center console pieces together? Like the ones in the bottom of the storage cubby and top. Got a full size console for my truck but it’s missing the hardware.
2x 10mm
This is the video I have been looking for, Bc my 92 console is so small and I really want a full size center console to the dash
Mine doesn't fit like that. My truck is an 01 extended cab and I took the console from an 04 ss silverado. Think because the piece under the radio is still in my truck. I'll try to get it fixed. Crazy I've been rocking it like for years and was too lazy to see what everyone else was doing to overcome this issue
Looks really good. I want to do this with my 98 extended cab but I’m not sure what year donor to look for. Any suggestions? The factory console is pretty useless.
Not sure on the obs trucks unless it's got the newer interior in it
I’m thinking the same for my 95 extended cab. It’d be cool to make those ac vents work to help cool the amps I’m going to run since i took out the rear seat.
You should’ve used a 99-02 center console. Then you’d have 3 charger ports instead of only two, & the console lid has a lock on it. 99-02 consoles also have a cassette player which can be removed & replaced with a 2nd storage pocket.
I kept the tape player, as it can be connected to the main factory cd player radio, & use a $5 cassette adapter for your aux input.
I see you are still replying to comments so I will make one, I just did this swap but without putting in the console bracket. I have heard that you can install the bracket and then lift the console a little off the ground and install the bolts when the console meets the dash so it looks flush. I can post some links to what I am talking about if you are interested although I know you already did the double din swap so that it covers the gap but still. I haven't tried using the bracket to mate the console and the dash but will being doing that tomorrow hopefully and I will comment and let you know how it went
Have you tried that yet? I can’t stand the gap in mine lol @shakenfake
@@travisloper864 Yes and it works perfect. Did it about a year ago
So how exactly do you do it? And yours is a 2002?
@@travisloper864 There is a bracket that just bolts into the dash pick up the console as far as you can and bolt it into the bracket. I think I posted some pictures on a truck forum I am on. Maybe I have some on my computer I can't remember It is really easy though and you will notice it instantly
What color was that I like the light gray
How’s the paint holding up?
Hi, quick question, I was planning on doing the exact same thing and was wondering if you can still do a console swap if you have the floor shift 4x4, if so what modifications need to be done for it to fit?
You have to notch out the side of the console and cut and weld and modify the 4x4 shifter to come out the side of the console.
I'd like to know how you got the power options to work on your truck... I'm having trouble with mine. I've got the motors and harnesses to properly plug everything in. But not working as it should... Wondering if I need to swap the whole dash out with another one
The power options for the center console all plugged in besides the rear radio control and sub.
Good information
Thanks
I have a 99 GMC Sierra 3500. Will this swap work for the previous gen?
If it's an obs it should if it has the new interior in it
Anyone know the speaker color wires
I know your truck is a single cab so it really don't matter but I wanted to do the swap in a crew cab How hard would it be to make the rear vents work?
You would have to get the vents that run along the floor out of the doner truck
@@1740-garage_ ok thanks I'm a new subscriber to you channel but so far I love it looking forward to some more content
How did it go?
I’m trynna do this on 2001 Tahoe
I see the 740, where are you located
I want a smaller center console in my '05Tahoe. I'm a tiny woman, I love my 4x4...but the center leaves no room for my purse 🤣
Virginia W I’ll sell you one
vincent what color
Put your purse in the console you can even lock it in there see problem solved
@@rickybobby9005 unfortunately not. As a mom of 3, my purse doubles as a diaper bag. Just won't fit. But thanks.
Do you have to do the glove box too?
Yes
Will this center console fit a 2002 GMC Sierra?
Yes
I have a 01 tahoe and want to do center console swap but did you hook up the sub? If so how?
No I didn't hook up the sub yet you have to swap body harnesses to use the sub unless you just run wires to it.
U ever hook it up?
I would like to see the door conversion, nobody shows u how
Show door conversion
Does the air work for the rear passengers?
My truck is single cab you would have to swap the air ducts out to
Why dont you try a 2 tone interior? Like let the lower half be light colored and the top half be dark. And do all the snap on pieces of the door panels the light color. Some newer trucks come factory that way
I'd be great if you could remove "UM" from your vocabulary. Video is great and informative. Thanks.
When is the manual doors to electric video coming out
I'll be working on a video soon
1740 Garage okay I will be waiting on it
Also looking forward for that video!
Where can i get this console?
You can get them in the junk yard fairly cheap
Dude really has two different greys in his truck 💀😭😭😭
i have access to these parts. dallas,Tx
I mean you did a good job but that different color shade fucks with my head
I agree I swapped it out for another one since I did the video
@@1740-garage_ like real shit it looks sick but what i did was I took a sample to my local paint store and they pulled a list of original colors for all car interiors
Adhesion promoter first. Gonna rub right off
Let me get Your old interior
The Silverado console is NOT the same as Tahoe and suburban yes they have the same mounting points and hardware but the cup holder and center storage compartment are different shape and size and Tahoe and suburbans have a locking center console and the Silverado does not. Also the Tahoe and suburban have a rear radio control unit in the rear of the console above the cup holder and the Silverado does not.
Yes you are right but they still bolt in the same that's what I meant but thanks for the correction 🤙
No adhesion promoter or finish coat? Doubt that will last a long time. Sorry man.
I swapped the console out for a dark charcoal one so I took this painted one out.
I’ll trade you center console you don’t need vents to the back main 🥺🤣🤣🤣
One word.... Overspray
Terrible fukn music OMG 😱😱😱😱