Create Your Own WiFi Router Power Bank: A Step-by-Step Guide
Вставка
- Опубліковано 14 жов 2024
- How to make wifi router power bank diy at home.
In this video I am using a lithium ion 18650 cell to make a battery.
•Battery backup for wifi router
•Diy wifi power bank
•How to make wifi router power bank at home
•How to make powerbank at home
👉Boost converter
The XL6009 is a Buck-Boost switching Regulator, meaning it takes in an Input Voltage and then switches it to produce a regulated output voltage which could be greater or lesser than the Input Voltage.
👉Bms (Battery Management System)
A BMS balances a pack by removing extra charge from the most charged cells, and / or by adding charge to the least charged cells. Balancing can be dissipative or nondissipative (dissipative: energy is wasted in heat; nondissipative: energy is transferred and therefore it is not wasted)
👉Diode
Diode is a semiconductor device that essentially acts as a one-way switch for current. It allows current to flow easily in one direction, but severely restricts current from flowing in the opposite direction.
✅This router can run 5v router 9 volt router 12 volt router.
-----------------------
👉Product required
• 6 lithium ion 18650 cell
• BMS 3s/ 12v / 20amp
• Boost Converter xl6009
• Diode 4007
• Resistance 680 ohm
•Male / Female Connector
• Led charging indicate light 4 volt
------------------------
👉 Chapter
0:06 Testing
7:50 Circuit Diagram
_______________________________________
✅Instagram
www.instagram....
✅Facebook
/ abdulhaseeb.amjad.1
______________________________________
⭕️About pak creation:
This channel is all about DIY,how to make products at home.
Please like comment and subscribe my channel for latest update.
Have a nice day
#diy #wifi #powerbank #upswifirouter #diywifipowerbank #ups #wifirouter #pakcreation #homemade
MashaAllah acha explain kia, apko knowledge he isliye... keep working
Ap ke sabi video kafi informative hoti hn
Sir can i use 12V 2A adaptor as input?
My modem power rating is 12V 1A
If you want to run your Wi-Fi router directly, you can run it at 12v and 2 amps, but if you want to charge the batteries inside the power bank, 2 amps is too low, minimum up to 5 amps. A 5amp charger is required
stay blessed
You gave a very informative video to all viewers. Your technical work is very impressive. Carry on and keep it up. Thanks.👍
hi sir thanks for appreciation stay blessed.
بہت عمدہ جناب سلامت رہیں
thanks sir for appreciate ❤️
Which adopter u used for charging? What is input voltage to charge?
hi sir thanks for watching my video hope you got something to learn from it. Here's a 12-volt 5amp adapter used to charge the Wi-Fi router.Stay blessed
Sir me ne bulkul aisy hi banaya lekin boost converter lagany ke baad bms ke output me or boost converter ke output me volt 0 ho ja raha hy kia masla hy bta den
Aslam u alikum sir new bms lagaya ha to sb say pahly usay ek dafa input 12v daain phir wo apna output start kry ga (input/output pin same han)
bms ky output pai current ni ay ga to boost converter pai kis trh ay ga so pahly bms ky output pai current check krain stay blessed
@@pakcreation925 boost converter lagany se power chaly ja raha hy sir
Bhai.... Badhiya information hai. .. Thanks for this 😊
hi sir thanks for appreciation.
Doesn't that booster module gats heat
Can we use 12v lithium ion battery normally used for bikes instead of cells to make this power bank
Sir I have uploaded the video in which I have run the Wi-Fi router on the battery of both my bike and car, go and watch.
Bhai ager ye chahey hoo to ap bana dain gy? Charges bta dain or back up bta dain kitna backup deta ha
Sir ap agar Karachi se hain to ye bata dain ye sara saman kis shop say mily ga easily
Ni sir lahore say han ap ko sara saman online mil gye ga daraz say
Sir apki vedios bohat achi hain.sir ye kitny hour tk router on rakhy ga.
5,6 ghntay bola he video me
السلام عليكم بھائی یہ بوکس کہاں سے ملے گا کوئی شاپ بتا دیں لاہور میں ہو تو یا پھر آن لائن ڈلیوری ہوجائے لاہور میں ؟
My router is of 12V. what will happen if dont use the buck booster pcb XL 6009 ?? Please reply
I think, although battery provides 12v but during discharginh it may get low and give lower voltage, its added to maintain 12v
XL6009
بوسٹر کی ان پٹ پر اگر تین وولٹ بھی دیتے ہیں تو آٶٹ پٹ آپ پینتیس وولٹ تک حاصل کر سکتے ہیں اگر وولٹیج بیٹری سے لے رہے ہیں اور بیٹری کمزور بھی ہو گٸی ہے تو ظاہر ہے بوسٹر کو وولٹیج کم ملیں گے تو پھر بھی بوسٹر آپ کو بارہ وولٹ پورے ہی دے گا
یہ سٹیپ اپ وولٹیج بوسٹر ہے
Sir please bata dy booster ky bagair modem jal jy ga ya nhi ?
hi sir thanks for watching my video
booster ky bagair ap ka modem kaisy jalay ga!! ap ka modem sirf us ke requirement say zaida volts dainay say kharab ho ga like agar ap ka modem 12 volts ka ha usay above 12 volts daain gy to jul gae ga.
@@pakcreation925 sir g Mera jala hn PTCL ka modem is Liya Bata rha ho koi our na Meri tarha kharab kr ly
Hi sir boost converter ka kam hota ha voltages ko zaida krna so agar hum boost converter ky bagair bnay gy to hamara modem ko koi furk ni pry ga
Xl6009 ki jgh pr xl4015 E1 use kr sakte hhh kyy?
nahi sir xl4015 buck converter ha or video mai hum nay boost converter use kai ha stay blessed
bhai battery py soldering ni hoti ye kya masla hai ???
bhai in ky uper soldering ni krni chahiya explode be kr sakta sopt weld device say in pai tanka lagta abi wo tha ni to soldering iron use kai ha ap cell ke surface (positive/nagative) ko rub kr laain kisi chaiz say or phir soldering paste laga laain then solder karain stay blessed
Bht zabardast video banai hai bhai 👍👌👌
hi sir thanks for apperciate
@@pakcreation925 bhai aysa he banana tha main 👍 bht help mili hai apki video say. Keep up the good work 💪 Allah tmko aur kamyabi day Ameen 🤲
ampre kitna de raha hai
او یار ہر ادمی یہ نہیں بنا سکتا، کؤئ بنا بنایا بازار سے مل جائے تو وہ بتاؤ ، وہ اچھی بات ھے
ye un k liye he jo bnana chahte hen, of course electronics ka channel he na k koi products review
So good
Diode Or Resister konsa use Kiya ??
Hi! sir thanks for watching my video. Video ky nichy description mai saray parts name likhay han or video mai circuit diagram mai be name mention han. Have a nice day BuRaaQ Tech
Bhai agr ap sy ye buy krna ho to?
Very Nice
bohat kamal boss
thanks for appreciate
Is booster needed since the battery pack is 12 volt and you also use 12 volt for the router.....🤔
Hi sir’ When the battery drops below 12 volts to 10 volts or 9 volts, the boost converter will boost the battery to 12 volts. The boost converter will not allow the output voltage to drop below 12 volts under any circumstances.
Alway stay blessed
but sir the battery below 9 to 8 volt bms out cutoff output volts@@pakcreation925
Appreciate 🎉
Sir mene 5000mah 3.7v ki 6 battery's lgayi han or charger 12v 2a ka hai wifi jio ka hai par battery backup nhin de Rahi hai please kuch help karo
Hi sir, contact me on Instagram, there is a link in the description of the video, I will tell you all the details there.Stay blessed
@@pakcreation925sir link comment mein hi dedo please vnha se nhin ho rha hai
Bro how mush amp does your battery pack is ?
Brother amp depends on how many mah cells you are using . amp of my battery is almost 12 to 15 amp
Hi bahi mujy pehly ye btadu ye box kha sy mily GA
Hi sir, thank you for watching my video.yaai box ap ko hall road lahore say mil gye ga kn se shop wo ap vlog mai deakhligiyay ga uploaded ha. stay blessed
Sar ye kitne ka hai aur kaha mile ga
Hello bro I'm irfan
bhai mene 2 cell se hi power bank banaya lithium ion se lekin ye router pr kam nh kr raha router dc 9 volt ka h btayn masla kia h
hi sir thanks for watching my video!! ap nay dono cell series mai connect kr lai so un ky voltages 8.4volts ho gay gy jb ky ap ka router 9 volts ka ha
Good nice
Amazing
Sir yea Khali box nai mil raha mujy Kaha se milta hai
Thanks for watching this video.Ap ko yaai lahore hall road say mil gye ga box
Bahi ye black box pakistan sy kaha sy mily ga
Thanks brother for watching this video. Bhai ye lahore hall road say mil gya ga Mera jald vlog ay ga yaai sb product kahan say milti.I hope this video helps you complete your project stay blessed.
Yar m ny 3 cella paa bnaya h power bank lakin wo 25 mint bad band ho jata h 25 mint ki ti.img h us ki
ap ne bana liya hai mtlb apko series or parallel samjhane ki need nhi hai👍👍 pr battery timing km hi hogi kiun k ap ne 3no cell series main laga k 12 volt puray kiye hain ...ap ko 6 cell lagane parenge tb apka 12 volt b complete hoga kiun k cells saray same voltage nhi bnate uper nechay hotay hain volts..(ek do volts)..or dusri bat ye k ap jo charger use kr rhe wo in 3no cells ko ek sath pura charge nhi k pa raha .is liye ye charging module use krna hoga ..3no cells alag alag charge hongay pr connections ki wja se out put ek sath denge👍👍 ap 6 cell bhi lga lo agar charging module nhi hai to ap k 6 main se agay walay 2 cells full charge hongay baqi k low rahenge...
or dusri bat apko ye voltage control circuit bhi use krna hai jo 12 volts puray de .na ziada na kam .. kiun k ap meter pe check krogay to 12 show hongay pr jb use karogay to voltage drop hongay kiun k device use horhi ...to jese hi charging low hogi ap k cells 12 se km volt show krne lgenge 25 mint bad voltage jese hi 11 se km hongay apka router off hojaega kiun k wo 11 volt minimum or 13 volt max barsasht krta hai ..isi liye ye circuit use hota hai k ye volts ko up down na honay de ..9 volt ko b 12 bana k deta rhega ye ...hope u understand now ..
yar apse rabtta kese kren
full charge hone ke baad battery cut off kese hogi ?
Hi sir thanks for watching this video. Hum nay is mai 3s BMS module use kai ha so battery jb full charge ho gye ge to BMS auto cut off ho gae ga 3s bms ka maximum charging 12.8 to 13 volts han. Jb battery 12 volts tk charge ho gae ge to bms us say zaida battery ko charge ni honay daai ga chahay battery ko overnight charge pai laga do.Bms ka kam battery ko over charge or over discharge honay say bacahana ha.I hope you understand. If not, you can ask again. stay blessed
👍👍👍👍
❤❤
Do not try to make this circuit. It will dangerous. I make the same to same but the issue is Diode. After 2-5 min of electricity comes and when the battery charge and same time bypass the electricity to wifi that time the diode are heating too much, that much they will heat up you can just touch them after 10 mins, Boost Converter + Diode they are like to blowed up that much they they produce.
You don't keep this into power outlet !!! You only use when is no power to powered router !!!
When power comes, you disconnect this and plug wall plug into router !!!
You need to learn how to use things
Mera bms full charge nai hora
hi sir thanks for watching. i don't understand !!
👍✨
👍🏼✌🏼
And that xl6009 booster module has limit of 4 amp
yes bro Input Current: 4A (max) xl6009
@@pakcreation925 than how did you put 12 15 amp battery in that
Please reply ker diya kren😊
@@prasunsilwal6457it depends on current drawing device. So if its drawing under 4 no problem.
Bhai ap bana kr sale Kary
😮😮😮😮😮😮
Buht he Aala❤
thanks for appreciating
Bhai Agr Yeah Power Bank Ap Mujhe Bna Kr De De Tu Mai Apko Payment Krduu Ga Advance Pls Reply Bhai
bhai jan mai ap ko her trh guide kr do kis trh bunay gs video call pai or jo chaiz chahiya wo be bta do ga kahan say milti stay blessed
PlZ apka whsapp nambr kya ha bro many much poch na ha
Aslam u alikum bhai video ky nichy instagram link hn ap us pai contact kr laain thankyou
Bhai apka WhatsApp number mil Sakta hao
sir There is an Instagram link below the video, contact it