Can you share the build list… i wanna go grocery shopping for the exact setup. I’ve got an 07’ 4.8L out of a Silverado 1500 and swapping tht small v8 engine into my 07’ trailblazer LT fasho
English= Quite a few people don't realize the power handling capabilities of the 4.8L. They are equip with a very strong rotating assembly good for upwards of 800 horsepower.
Dude I need details on your boost control setup on the Camaro and if the terminator is controlling it how you set that up. Like boost by mph or boost by rpm? I’m coming close to completing my turbo t56 99 Camaro and have no idea how I should set it up
Hey brother I'm from the 985 😂❤ have same block for the 4.8 vortec is an power house in a 1500 let shoe these ppl how our Cajun ppl could double up the turbos on this cast iron it an air hog
I need you guys to put a turbo setup on my 86 shortwide chevy. I'm about to take out the 5.3/ 4l60e and put in a 6.0/ 4l80e but would like a turbo and 10lbs would be plenty for me.
Just got a reg cab long box with a 4.8 and a turbo 350 trans, very confused previous owner said it had a 6.0 head??? Any clue why someone would do that?
Hey can you please do a video on LS swapping a Malibu I love the car but I also love my V8s and I’d rather keep the car and LS swap it then get a car I don’t want with an V8.
To me the 4.8 was always an excellent turbo candidate. Super thick cylinder liners that’s 2JZ boost friendly and short stroke for rev ability.
This is a very refreshing channel, it's really nice to see a shop that knows what they are doing
I’d argue the 4.8 is one of the better ls most to boost
thats incredible power from that small block 292 cubic inch motor. excellent job! thank you for the content!
I love you channel you should throw in an update video on how things are going.
I live in Cade I see ur truck almost everyday 👍🏾
Yep I’m always on highway 90 in Broussard😂
Love your channel bro keep the videos coming please
If you dont mind me asking, about how much did you spend total?
Can you share the build list… i wanna go grocery shopping for the exact setup. I’ve got an 07’ 4.8L out of a Silverado 1500 and swapping tht small v8 engine into my 07’ trailblazer LT fasho
Dudes be sleeping on da 4.8 they internals are good till 800hp
English= Quite a few people don't realize the power handling capabilities of the 4.8L. They are equip with a very strong rotating assembly good for upwards of 800 horsepower.
What’s a good transmission for these? Wanna put one in an s10
Finally ran into the Tik tok car dudes UA-cam channel lol.
This vid just popped up in my feed this a shop in louisiana😮
How much will this build cost for a camaro im planning on building?
Nice 👍👍 ya, small blocks are supposed to be small,if not they just don't rev
I missed the turbo Tahoe that thing was moving!
If my brother would sell it to me I’d buy it in a heartbeat
That Tahoe was what brought me to the channel. Fast and funny to watch👍
Hey you think if I steal this build it would work just to cruise in a 79 cutlass supreme or I should stay completely stock
Whats a safe amount of timing to run on a 4.8L N/A engine? And how much timing should I pull if I go turbo (10psi) down the road?
What would I need for a reliable 900whp twin turbo build?
A 4.8ls if you know what your doing will make 1200hp I’ve seen it
Dude I need details on your boost control setup on the Camaro and if the terminator is controlling it how you set that up. Like boost by mph or boost by rpm? I’m coming close to completing my turbo t56 99 Camaro and have no idea how I should set it up
Does the Terminator X come with Public Enemy exhaust, Flava Flave brakes😁,im messing around, love the channel Where is your shop located
Will it tune turbo ?
Can you give information on the AC components in the Monte Carlo?
Hey brother I'm from the 985 😂❤ have same block for the 4.8 vortec is an power house in a 1500 let shoe these ppl how our Cajun ppl could double up the turbos on this cast iron it an air hog
I need you guys to put a turbo setup on my 86 shortwide chevy. I'm about to take out the 5.3/ 4l60e and put in a 6.0/ 4l80e but would like a turbo and 10lbs would be plenty for me.
We got you bro just text 337-346-3444
Just got a reg cab long box with a 4.8 and a turbo 350 trans, very confused previous owner said it had a 6.0 head??? Any clue why someone would do that?
Japan had stand alones back in the early 2000s Apexi Power FC with commander.
The 4.GR8
Nice man! Love me some fbodys
Ly2, L20 LR4 all the best
Nice work
Brotha I am building one in my Chevy 1500 going supercharger
Hahaha I been in those parts of mehhh-he-cooo ole son!
What was the second car? ? 😍
Are you in California
Hey be careful when you talking about that truck. That's the best truck ever built
Hey can you please do a video on LS swapping a Malibu I love the car but I also love my V8s and I’d rather keep the car and LS swap it then get a car I don’t want with an V8.
Where did you buy the parts when you did the cam on the transam??
madhatgarage.com
What's a good transmission for the 4.8 vortech
If you want an auto I would go 4L80
If u want a manual tho early fbody t56 bolt up to the 4.8 I believe
@@ktx._.fishing3049 4l80 is shit if you aint pushing power just added weight and a built 4l60 does the same thing and handles as wellZ
I’m a year late but soon I’m putting a 6L80 behind my 02 4.8 then ima have my motor worked over.
I got 4.8 truck with 142,000 miles is it worth putting a turbo ?
My boy has one with 210k and I have one with 269
@@orogold330mine has like 298 lol they are tanks
What's the manufacturer of that turbo set up?
On3 performance
What budget turbo would you recommend for the 4.8
I came to the right place
Nice ! what size turbo ? And what boost controller did you use ?
Turbo size is 75/76
Why go with a 4.8??
Cost
Cost and it can naturally handle boost
Shorter stroke. Better for building boost
Anyone know where to get that kframe he had
KM013 K-member, TURBO, LS1 Motor Mounts, Standard Rack Mounts
Dog where tf is your oil cap? (5:02)
That color on a chevy black is bad luck... lol
I got v8 for sale
that one wastegate is not up to the task
I support black channels