Mr Daniel I have the same model of scooter 150 cc thanks for the video in my humble opinion I prefer other colors greetings from Venezuela this video help me to buy and fix some pieces to my scooter
Wow. Such a nice compliment 😁 thank you!! Yes I enjoy doing as much as possible myself. It's not always the best it could be, but at least I learn new skills all the time.
Thanks Dewet! It is sometimes a learning curve but I enjoy trying to do everything myself "at least once". Something you probably understand very well😉
i was the same way when i got into scooting but after watching youtube videos they are actually easy to repair or you could just buy a whole engine for like 350 online and swap like 4 bolts lmao and some wiring
Yup… break disc is normally on the right hand side and the speedometer pickup on the right hand fork, i think you switched the sides of the front shocks.
@@BroughBuilt The very best Scooter 🛵 Restoration video I have seen so far my friend...🙏 I just bought one myself in the same conditions if not worse. And has been sitting outside in a yard for five years... 😮 😳 Although barely has 1,000 miles on it... Only paid $50 + $100 for a Lost Title so think I think it is worth saving & restoring..! 👍 Your video has showed me the way and so cannot Thank you enough...🙏 🛵🛵🛵🛵🛵🛵🛵🛵 Happy Scooting to you..!
Bro I wish you would have slowed down and showed unhooking and redoing each component, would have been a long video, but I'm watching to learn to repair these items so I can do it myself on my scooter??
I bought a scooter for $175 and it’s a complete piece. All the plastics are broken and wiring harnesses butchered, missing pieces left and right. I’m thinking of just doing this but don’t know where to start lol
I mean there is legit no need. Since the exhaust is anyways gonna get rusty over time... Its just enough to spray over a rubber coating that is heat resistant and that is it...
i got a keeway f-act 2007 ... 2 stroke minarelli horizontal :3 i hope i can do the things you done to this one ... its basicaly the same , only thing is i got smaller engine and different front end ... btw what did you polish the headlight glass and odometer plastic with ??? pls tell meh
Cool man. You should do it! It was very gratifying to give new life to her. Polishing the headlights is a four step process: first I sand them with 1000grit wet paper till even and matt, then I use compound (like car burnishing compound. Toothpaste will also work). Then polish with car polish. Lastly spray on some Pledge (or any other furniture cleaner) and buff off. Voila!
Thank you!! I decided on the plastic cover to make the seat waterproof and more durable. It works well and the seat isn't slippery at all. I actually got the idea from a ride-on lawnmower.
Wow, what a transformation! Does anyone here know how to paint the plastic covering? (Their black on this scooter here) I found a lovely vintage inspired scooter second-hand for a good price, it‘s working perfectly, but sadly the darkbrown plastic parts are faded by the sun in colour. The rest looks totally fine. I‘m not sure how to fix the sun damaged parts as I‘ve never done any restoration on scooters before 🥴
Hi. You can buy a "plastic primer" from hardware stores. They even come in aerosol. Rustoleum makes a good product. Just sand the raw plastic part with 600gritt water sanding paper, paint the primer, then after it has dried sand it lightly with 600gritt again just to scuff it evenly and then paint with whatever color aerosol you choose.
Haha! Sorry dude! I completely forgot to end the vid with a shot of me driving into the sunset. But yes it starts and drives beautifully. Only troubles I had till now was a dirty carburetor. But it was easily fixed.
Man, I appreciate speeding up the film so that we could see the whole thing. But you sped it up so fast that I just could not follow what you were doing so much of the time. I went back a couple of times to watch something 2-3 times just to follow what you had done and still could not see it. Waaaay to fast.
Bravo, that was impressive. Mechanics, electrics, paint and body, and upholstery. You sir are a man of many talents.
Hehe. Thanks man!
@@BroughBuilt I was impressed by the sewing skills....you looked determined to do it all on your own. Awesome transformation.
Thank you. Some call me stubborn, but I love trying my hand at everything.
Mr Daniel I have the same model of scooter 150 cc thanks for the video in my humble opinion I prefer other colors greetings from Venezuela this video help me to buy and fix some pieces to my scooter
One man army. Did every thing. Wow. Very talented. Some big company should hire you.
Wow. Such a nice compliment 😁 thank you!! Yes I enjoy doing as much as possible myself. It's not always the best it could be, but at least I learn new skills all the time.
@@BroughBuilt if i would have lived near you, you could have taught me a thing or two. Keep it up man. Hope you are healthy and safe
Thanks man. Appreciated. Go well.
You went above an beyond for this. about lost it when i saw you were taking the shocks apart. Well done
Thank you!
Car's, bikes and upholstery. ......anything you can't do? Good job Danie, keep the video's coming
Thanks Dewet! It is sometimes a learning curve but I enjoy trying to do everything myself "at least once". Something you probably understand very well😉
Im always amazed at how much you can do with so little!
Wow, must be nice having the power to rebuild a scooter from the ground up! I can't even disassemble my kick start correctly!😂
Haha😂. You shouldn't sell yourself short mate. But thanks for that!
@@BroughBuilt Lol, no probs, dude!
i was the same way when i got into scooting but after watching youtube videos they are actually easy to repair or you could just buy a whole engine for like 350 online and swap like 4 bolts lmao and some wiring
When the sewing machine made an appearance I lost my mind. Great job
Thanks Andrew!
WOW! What an amazing transformation!! Well Done Danie
NIce set of skills. By the time you busted out a sewing machine i was like no way!!
Hehe! Thanks dude!
I would have been very happy to watch this video in real time it was so enjoyable you have some gift.
Thank you 😁
Very impressive man. She’s a beauty.
U very good example for South Africa 👍
Thank you sir!
The front tire is turned upside down, good job
Wow. I didn't even notice till now. Thanks for that!
Yup… break disc is normally on the right hand side and the speedometer pickup on the right hand fork, i think you switched the sides of the front shocks.
True Attention To Detail..!
Excellent Restoration my friend...👍 🙏
Love the color pattern you came up with too. ..👌
Thank you man! I appreciate your comment
@@BroughBuilt
The very best Scooter
🛵 Restoration video I have seen so far my friend...🙏
I just bought one myself in the same conditions if not worse. And has been sitting outside in a yard for five years... 😮 😳
Although barely has 1,000 miles on it...
Only paid $50 + $100 for a Lost Title so think I think it is worth saving & restoring..! 👍
Your video has showed me the way and so cannot
Thank you enough...🙏
🛵🛵🛵🛵🛵🛵🛵🛵
Happy Scooting to you..!
Awesome job rebuilding that scooter!
Would be nice to see more scooter videos!
Thank you! I enjoyed this very much! I will definitely do one again if the opportunity arises.
Looks brand new. Top job
Thanks!
Multi talented person. Touching video.
Thank you sir!
The type of friends i want
I really enjoyed this. Another great video, thanks Danie!
Thanks Chris!
It looks great but how does it run
I enjoyed this video, thanks!
Amazing, What a job
Thank you!
nice rebuild man only a shame you didn't put on new tires those were worn out :)
Thanks a lot man. I have put some new ones on in the meantime 😃
Bro I wish you would have slowed down and showed unhooking and redoing each component, would have been a long video, but I'm watching to learn to repair these items so I can do it myself on my scooter??
Wow! Nice job. Im speechless
Thank you!
I bought a scooter for $175 and it’s a complete piece. All the plastics are broken and wiring harnesses butchered, missing pieces left and right. I’m thinking of just doing this but don’t know where to start lol
The silencer could have been treated better, no removal of dust rust, straight painting not even primer
I mean there is legit no need. Since the exhaust is anyways gonna get rusty over time... Its just enough to spray over a rubber coating that is heat resistant and that is it...
Great job 👏
Outstanding work!
Your scooter is the same as mine, 2 diffrences, I have 125cc engine gy6, and 1 big headlight in the front, and it's keeway 50 ry8 modified. :)
Nice!
Scooter detailing yes.
Era o video que eu procurava , otimo trabalho e um abraço do Brasil.
This scooter have a distant cousin called MZ Moskito 125 RX. I have one too and currently restoring bit by bit.
Very nice! I think your Moskito is a nicer bike than mine. Keep me updated
You are very good... well done.. I wish to know 1/4 of it.. 👍
Thank you for the kind compliment! But believe me, I learn everyday.
i got a keeway f-act 2007 ... 2 stroke minarelli horizontal :3 i hope i can do the things you done to this one ... its basicaly the same , only thing is i got smaller engine and different front end ... btw what did you polish the headlight glass and odometer plastic with ??? pls tell meh
Cool man. You should do it! It was very gratifying to give new life to her. Polishing the headlights is a four step process: first I sand them with 1000grit wet paper till even and matt, then I use compound (like car burnishing compound. Toothpaste will also work). Then polish with car polish. Lastly spray on some Pledge (or any other furniture cleaner) and buff off. Voila!
JUst im look for my bike restoration . Thanks for video
Thank you for watching and your comment!
It's a masterpiece!
After seeng this video i bring my old moped to repair shop lol
That's awesome! 👌 Glad if the video inspired you😁
Class 👏
Fantastic job! Just wondering, why the plastic film over the seat? Doesn't it make slippery to sit on?
Thank you!! I decided on the plastic cover to make the seat waterproof and more durable. It works well and the seat isn't slippery at all. I actually got the idea from a ride-on lawnmower.
beautiful video
Good job ❤
Too much work for this Chinesium scooter...
Great work ... What would be the approximate cost for the whole thing
Thank you! It was really not so much. Just a couple cans of aerosol paint and sanding paper. I think it was worth the time and effort.
looks beautiful, but does it run?
wow😍 i wish i had a scooter
I Want and Need to Learn This
I'm sure you will. Good luck!
Wow, what a transformation! Does anyone here know how to paint the plastic covering? (Their black on this scooter here) I found a lovely vintage inspired scooter second-hand for a good price, it‘s working perfectly, but sadly the darkbrown plastic parts are faded by the sun in colour. The rest looks totally fine. I‘m not sure how to fix the sun damaged parts as I‘ve never done any restoration on scooters before 🥴
Hi. You can buy a "plastic primer" from hardware stores. They even come in aerosol. Rustoleum makes a good product. Just sand the raw plastic part with 600gritt water sanding paper, paint the primer, then after it has dried sand it lightly with 600gritt again just to scuff it evenly and then paint with whatever color aerosol you choose.
Brough Built thank you for the advice 👍
Sure thing
Nice job done mate
Thank you!
I restore old motor bikes from say 20 years old to 3 years , some take a few days some a week.
Nice! I love old motorcycles but they have become quite scarce. I'd love to restore a prewar bike one day...
I do any bike I come across at a cheap price keeps me bizzy .
Keep up the great work mate , cheers
Good job sir, Thanx for this nice video
Thanks a lot! And thanks for your feedback 😊
I had one of this, but only 100cc
Very nice...
Brother so speed but I like this video
Better was an big Pot with some colorglue and then put this scrapy vehicle into this pot, and an new bike would be given.
It is a horrible scooter 🤢, but I love your video
Haha. Thanks! Let me guess, you had a bad experience with a scooter like this one🤔😂
@@BroughBuilt 😂😂yeah
Was it really that easy ?
Well... It goes much faster on video but at the end of the day it wasn't that difficult. Just be consistent and finish everything.
@@BroughBuilt you did that in one day ?
It took about a week full time.
@@BroughBuilt nice job
It was such a pleasure to watch your video
@@FernandoMartinez-wf4jd that is awesome to hear. Thank you!
Still confused with the name of the tape type he is using? Any help??
What tape are you referring to? Maybe I can help
Bravo !
c'est du jolie travail 👍😎
Merci pour le compliment!
whats the brand name of the scooter sir?
What kind of motorcycle?
It's a "no name" Chinese bike. It has the gy6 platform that comes from Honda design.
🎉👌🏻 bravo
This is not restoration.this is big cleaning. Ahahah
Haha! Indeed, a VERY BIG cleaning.
very good job , altough i'm not a fan of the color you chose it looks like new
Good job 👍
Thank ypu!
Very vundervoll👍👍👍👍
🔥🔥
But does it start?
Haha! Sorry dude! I completely forgot to end the vid with a shot of me driving into the sunset. But yes it starts and drives beautifully. Only troubles I had till now was a dirty carburetor. But it was easily fixed.
i wish i could do it with my scooter...
It was very rewarding. You should seriously consider doing it.
Awesome brother, but i think need more camera. Just my opinion and sorry for my english.
Thank you. I'm working on getting more cameras and better sound. Thanks for your feedback!
Amazing😱😱😱😱.
What model and brand is your scoot. Ty.
Hi there. It's a "no name" Chinese bike but it's exactly the same as Big Boy. Comes from gy6 platform originally Honda designed.
Good Job! how many days did you work on it?
Thank you!! It took me approximately a week and a half to complete.
amazing
Thank you!!
Brough Built thank you for posting too!
It’s a rust oleum over haul
Could have put new tires on it to.
V Nice 🎩👈
This scooter is a copy of Peugeot Speedfight in front and back of Yamaha Aerox weird scooter and has the speedometer of a Chinese bike
Interesting.
@@BroughBuilt search up these scooter s you will se that im right btw the speedometer is from a bike called baotian sanli devil also chinese 50cc
Yes you are right. I can only guess that some manufacturers used each other's parts to save on costs 🤔. But great observations btw
Great job, but the colours.........
Man, stinks !
Thanks. I have to admit that I did go outside of my comfort zone when choosing the colours...
Ladies style
Man, I appreciate speeding up the film so that we could see the whole thing. But you sped it up so fast that I just could not follow what you were doing so much of the time. I went back a couple of times to watch something 2-3 times just to follow what you had done and still could not see it. Waaaay to fast.
Restore with spray ..... bleah
Nan mais le mec il la même pas poncer avant de peindre bricoleur du dimanche
Daai was vreeslik oulik
guys
Собрал все круто, но цветное сочетание ужасное
Эмм а где,рестоврация где? Его же просто внешне освежили!Раздольное и внешне и внутри оживи.
Tou didn't started the scooter!
Apologies. After loading the vid I realized that I never filmed me driving off into the sunset🤔
None test drive
Want to fix my 125 ? Lmfaoo
Thats one half ass restoration. This video is to illustrate just what not to do.
Uuuhhhgg thats a ugly color