Is your Microwave tripping the breaker?
Вставка
- Опубліковано 6 жов 2024
- Click Subscribe then read on. 😀
Our microwave started tripping the breaker, so it's time to search for the wiring diagram and dig a little deeper into the problem.
First, locate your model number. It's normally on the inside of the unit. You can find it on the bottom left after opening the door. That model number will allow you to search for the part that I show in the video, but specific to your model of microwave. You can also use this number to find the wiring diagram if you need a temporary-ish repair to avoid the issue of creating a dead short and tripping the breaker every time you pull on the door.
Ideally, after you make this repair, remember to either press STOP before opening the door or wait for the microwave to time out.
Thank you for watching.
Please like and subscribe
💰Donate to Our Channel💰
Zelle: Melonie.Larew@gmail.com
PayPal: Melonie.Larew@gmail.com
Bitcoin: bc1qzjg6wmw97wvhn400gagk8tzqatn82wg4ywq8kl
⭐️READ PINNED COMMENT⭐️
Mission Automotive Dielectric Grease/Silicone Paste amzn.to/3Ndt6JQ
This stuff is SUPER handy and what I ended up using.
Super Lube amzn.to/43WhNNz
#microwave #microwaverepair #diy #repair #appliances
Stop your microwave before opening the door. Problem solved. You are welcome.
You're a pretty fart smeller.... I mean pretty smart feller.
Have a wonderful day!
I never did open the door while it was running . Not even once , but thanks .
Hey, @otgcanada
Yeah, it has less to do with opening the door while it's running and more to do with natural wear of the latch itself and the placement of the monitor switch versus the other 2 switches. Once the latch gets worne a little, just the natural vibration of the microwave can be enough to disconnect the monitor switch during operation causing it to trip the breaker.
Thanks for watching and supporting the channel.
Have a wonderful day!
@@thelarewsdo This oven is brand new , about a week old now . Since I`ve been watching different UA-cam videos after closing the door I`ve been pushing all of the door in slightly and it seems to work . I will be returning it . Thanks for your help .
Good call! That's way to early to be having those issues!
Worked perfectly. Didn't even have to disconnect all the panel wires.
Great to hear! Keep on cookin'
Thanks for watching!
The internet is a great thing! I was saving the same issue and googled “microwave tripping fuse” and found your video. Worked like a charm. Appreciate you putting this out there and the simplicity of your directions. All the best!
Hey Tim!
Thank you! 😀 We are glad we could help you. Thank you for watching and supporting the channel.
Have a wonderful day!
I found your video AFTER checking the 3 switches and fuse. Your tip saved me a lot of time and money! Thank you for posting.
Hey,
We're glad we could help! Aint nobody got time for a broken microwave. 😁
Good job on the repair.
Thank you for watching and supporting the channel.
Have a wonderful day!
You are THE MAN ! Exactly my problem. Just about to go shopping. Many thanks.
Hey thank you and way to make it happen capt'n! Glad you to hear you are back up and running!
Have a wonderful day and thank you for watching.
oh my word! GOLD! if only I would have started here....I actually thought it was a squirrely GFI breaker bc our washing machine trips it....nope! door switch just like you said!! thanks!!
Hey,
That's great to here! Glad you got it all squared away.
Thank you for watching and don't forget to subscribe to support the channel. 😀
Have a wonderful day!
Thank you for the video. I had already replaced the breaker thinking it was getting weak.
Great. Glad you were able to get it up and running. Thank you for watching.
Worked exactly as described. Solved the problem. Thanks!
Excellent!
You're welcome!
Thank you for watching and supporting the channel.
Have a wonderful day!
Thank you for this! Same model microwave doing this. Me and my son pulled it down, unplugged sensor, and now back in business!
Hey Thomas.
Excellent! 👊💥 Glad we could help.
Thank you for watching and have a wonderful day.
Same here , thanks a lot!
You're very welcome.
Have a wonderful day!
@@thelarewsdo you as well, just subbed!
Worked on my GE. You just saved me over two hundred dollars.Thank you!
Excellent! You're very welcome!
Thank you for watching and supporting the channel.
Have a wonderful day!
Just did it in my Frigidaire and it worked! A real blessing this video man. Thanks so much. I’ll buy the part for it when I can.
Excellent! Glad we could help. We have another video we are trying to get to gether. We are working on a "permanent", cost effective upgrade. The video will be a touch more technical, but the upgrade will cost less the $5.00.
Thanks for watching and supporting the channel.
Have a wonderful day!
Thank you! That just saved me $350 and several hours of my weekend!
You're welcome 😀
Glad we could help! Enjoy your weekend and have a wonderful day!
I have this identical microwave and the exact problem you explained about the coffee and I this bypass of the third safety switch worked. Thanks for the video.
Great, you're welcome. 😀
Thanks for watching and supporting the channel.
Have a wonderful day!
I am the worst handy man in the planet but your video makes me a pro 😂. Thank you for saving me $500 I almost bought a new microwave.
Haha that's great to hear! I'm sure your not giving yourself enough credit, but we are glad we could help you!
Thank you for watching and supporting the channel.
Have a wonderful day!
Bless you for making this video. I couldn’t figure out why my microwave kept tripping my breaker. This video helped me solve the problem.
Thank you and that's wonderful to hear!
Thanks for watching and supporting the channel.
Have a wonderful day!
This fixed my problem on the exact same model. saved me so much time and money. Thank you so much for making this video. You’re a genius!
Wonderful! Thank you, you are very welcome!
Thank you for watching and supporting the channel.
Have a wonderful day!
Bless you! Possibly the quickest and easist fix of an appliance ever!
Hey Ronald!
Thank you. Glad we could help you out.
Thank you for watching and supporting the channel.
Have a wonderful day!
Out of all the vids this is the best one to deal with this situation with a "temp" fix. Exact same issue with the middle switch causing the issue. Works for now but for safety reasons I'll still have to order the replacement of the switch I took out. But thanks for ur vid
Hey!
Thank you for your kind words! I'm glad we were able to get you cookin'. When ordering parts, remember it's the switch holder that gets worn and has play in it. I would also replace the switch since it's been taking a beating. Thank you for watching and have a wonderful day!
Wow thank you so much. I was about to call an electrician and was worrying about how much I would need to come up with for that. I just followed ur channel for more great tips & fixes. Thanks again 🙏 🥰
Hey Rebecca,
Excellent! Glad to help and thank you for your support. If you have any other suggestions for future videos feel free to email or comment.
Thank you again and have a wonderful day!
I wish I could give this more thumbs up. Easy to understand, to the point, temporarily and permanent solutions. Perfect. Earned a thumbs up and a subscriber
Hey Matt!
Thank you for the support! I'm glad we were able to help you out !
Have a wonderful day! 😊
Thank you! I have same problem and was looking into breakers.
Hey Russ,
Welcome welcome. Glad to help!
Have a wonderful day!
Finally decided to try and fix mine after years lol. I’ve been using a spare and recently bought a new smaller one which is entirely too small. Finally figured out the right switch to unhook and boom it works. Thanks so much
Excellent 👊 💥 You're welcome! Glad we could help you out!
Thank you for watching and supporting the channel.
Have a wonderful day!
Thanks for the great video! I came home from work late tonight and at 11:45 pm found out the microwave was tripping the breaker, but thanks to your video I was able to “fix” it by removing the monitor switch. Now my wife has the microwave to use tomorrow to help get the kids ready for school.
Hey,
You're welcome. I'm glad to hear we were able to take some stress off of you. 😀
Thanks for watching and supporting the channel.
Have a wonderful day!
Sending my appreciation all the way from the Yukon. Thank you so much!
Fred! You're very welcome, we're glad we could help you! The Yukon looks beautiful from the pictures I've seen.
Thanks for watching and supporting the channel.
Have a wonderful day!
May GOD Bless you brother…. You just saved me $200+
Your video just fixed my microwave…once again, GOD BLESS YOU
Thank you 😀
I'm glad we were able to help you out!
Thanks for watching and supporting the channel.
Have a wonderful day!
Worked perfectly. Thanks
Excellent! Glad to help!
Thank you for watching and supporting the channel.
Have a wonderful day!
Explained perfectly and I now have a working microwave!
Hey,
Thank you! I'm glad the video helped!
Have a wonderful day!
Thanks for this video. Was able to fix my GE microwave in no time.
You're welcome.
Have a wonderful day!
Thanks! I just did your steps and voila! A working microwave!
Welcome, welcome 😀
Glad it helped and have a wonderful day.
Please like and subscribe to help support the channel.
Thanks so much!!! I just fix my Frigidaire by myself 😊!! It’s working now perfect 👍🏼
Hey!
You're very welcome! Good job.
Thank you for watching and supporting the channel.
Have a wonderful day!
It worked on my GE! Thanks! 👍
👊💥 Glad to help.
Thank you for watching and supporting the channel.
Have a wonderful day!
Same exact thing on a general electric microwave. Thank you!
Hi Andrew Fisher!
Excellent! You're very welcome!
Have a wonderful day!
Thank you so much sir! You have saved us from purchasing another microwave.
You're very welcome! We're happy to help.
Have a wonderful day and thank you for watching and supporting the channel.
Worked great! Thanks for the help!
Excellent! Glad to help!
Thank you for watching and supporting the channel!
Have a wonderful day!
Wow! Worked like a charm.Thank you so much. You are amazing🙏🏻
Hey! Thank you!! Good job fixing it.
Thank you for watching and supporting the channel!
Have a wonderful weekend.
This fixed my issue!! I replaced the breaker thinking it was weak... then replaced the 20A fuse in the microwave... then found this video! thumbs up'd and subscribed to ya!
Hey Maple Man Dan!
Excellent! Glad we could help ya! Thank you for watching and supporting the channel.
Have a wonderful day!
Thanks buddy! Just went in and took the plug out without any only and was done!
👊 💥 You're welcome! Glad you're back cookin'.
Thanks for watching and supporting the channel.
Have a wonderful day!
Worked like a charm. Thank you so much
Excellent! Glad to help!
Thank you for watching and supporting the channel.
Have a wonderful day!
Well done, Sir. This solved our issue to the tea. Thank you!
Hey ! You are very welcome! We are glad we could help you out.
Thank you for watching and please like and subscribe to support the channel.
Perfect!!! This was the fix I needed to save hundreds if dollars!!
Wonderful! Glad we could help!
Thanks for watching and supporting the channel.
Have a wonderful day!
Yo, just did this right now to my moms microwave. Works like a peach. Thank you so much 😊
Haha you're the favorite kid now ! Any time.
Thank you for watching and supporting the channel.
Have a wonderful day!
Worked like a charm. Thank you so much.
That's great to hear! You are very welcome! Thank you for watching and supporting the channel.
Have a wonderful day!!
Thank you so much for this videos. I had the exact issue with my microwave and i was ready to but new one. Luckily went on you tube and found your video. Thanks
Hey,
We are glad we could help!
Thank you for watching and your support for the channel!
You are the man! Thank you for posting this and saving us $$$$$
You're welcome and thank you!
Thanks for watching and supporting the channel.
Have a wonderful day!
Thanks for saving me $300 worked like a charm.
Excellent! Glad to help!
Have a wonderful day!
Please like and subscribe to support the channel.
Thanks so much. It actually worked for me. Ordered the new parts too
Hey Theodore!
That's great to hear. 👊💥 Glad we could help you out.
Thank you for watching and have a wonderful day!
I have the same problem but my house runs on a 4000 watt pure sine wave inverter . Some thing about the microwave oven that is brand new , that when it starts it trips the inverter . and the entire house goes down . I have cooked entire meals using my air fry toaster oven ( 1800 watts ) , hot plate ( 1000 watts ) , AC on low ( 580 watts ) , fridge ( 120 watts ) , freezer ( 120 watts ) , and the rest of the house that totaled 3375 watts all at the same time with no issues . It is just something about the start on the microwave that causes the inverter to trip and the rated watts for the microwave is only 1350 watts . So... the cure to this was to simply turn the power down on the microwave to 6 instead on 10 and it runs just fine . My oven is a Master Chef . I have even plugged the microwave strait into the inverter with nothing else plugged in and same thing . Hope this helps if you have the same problem .
Hey,
Thanks for the tip!
Have a wonderful day!
Thank you Sir! Mine Eventually would shut off and trip breaker the second I hit start. Thank you!
You're welcome. Once the hooks on the door start wearing the latch down those issues start occurring. I'm glad you were able to get back up and running. A new latch (the piece that holds the switches) will be the ultimate fix.
Thank you for watching and supporting the channel.
Have a wonderful day!
Worked like a charm! Thank you.
Excellent!
Glad to help! Have a wonderful day!
Please like and subscribe.
Thanks!!! Just saved me a new microwave.
Welcome 😀
Thank you for watching and supporting the channel.
Have a wonderful day!
Thank you for sharing this information. It worked and saved me $$$!
Hey Barb!
You're very welcome! We are hoping to add a follow-up video. If all goes well, it should improve upon the microwave's design, use all the safeties, cost less than $10, and be just as easy as the previous fix to implement.
Thank you for watching and supporting the channel.
Have a wonderful day!
It worked! Thank you for this video!
Excellent! You're very welcome!
Thanks for watching and supporting the channel!
Have a wonderful day!
Saved my day and money, thank you, you the man!
Hey!
You're very welcome! Thank you!
Please like and subscribe to keep us rolling.
Thanks man got mine working again. I will replace plastic piece in a couple weeks.
Excellent! 👊💥
Have a wonderful day!
Thanks a bunch!!! Solved my problem
Excellent! 👊 Good job!
Thanks for watching and supporting the channel.
Have a wonderful day!
Thanks for this video. Quick save before Thanksgiving.
Hey Scott!
You're welcome. Glad to help!
We hope you and your family have a wonderful Thanksgiving 🦃.
Thank you for watching; please like and subscribe.
Thank you so much, this worked for me, and I have the exact same brand 😊
Excellent!! Glad we could help.
Thank you for watching and be sure to subscribe.
Have a wonderful day!
Thanks a lot, works great no money spent 😃
You're welcome and good job!
Thanks for watching and supporting the channel.
Have a wonderful day!
#BOOM! I also didn't disconnect the wire harnesses - just the lower switch. Back in business!!!
Excellent! Glad you are up and running.
Thank you for watching and supporting the channel.
Have a wonderful day!
Thanks for putting me on the right track, the core problem is most likely yanking the door open while the microwave is running, the 2 safety contacts can’t handle and are not designed to take that kind of arcing.
Hey,
Glad to help!
Thanks for watching and supporting the channel.
Have a wonderful day!
Thank you my granddaughter needed help it was a Frigidare
Happy to help! Thank you for watching and supporting our channel. Have a wonderful day!
Thank you.That totally worked.The only problem is if the door is completely closed,It makes a hum and the only way to get rid of it is to leave the door slightly open
Hey,
You're welcome. The hum could possibly mean that one of the other switches may be "welded" closed due to the previous issue. The other switches can be removed and carefully opened to verify if they are stuck or not. The side splits off revealing the internals. Sometimes if you're lucky a little coaxing can unstick the switch tips. Once they are unstuck put them back in and see if that resolves the hum.
Thank you for watching and supporting the channel.
Have a wonderful day!
Okay, I'll give it a shot.Thanks for the quick response
Welcome. Let us know how it goes. 😀
It worked! I opened the middle switch because that was the only one where the tab on top wasn't clicking and saw that the tips were stuck together, like you said. I used a small flathead and separated them. Put everything back together and connected the middle switch this time, and now everything works great! Can't imagine how many people would have bought a new microwave. Thanks again! There's another video that shows the guy opening the switches and showing you the difference between one welded together and not.
Excellent! 👊 💥 Now you're cookin' lol.
Thanks for the video, saved me money
You're very welcome! Glad we could help.
Thank you for watching and supporting the channel.
Have a wonderful day!
Worked Perfectly! Thanks 🙏🏾 💪🏾
You're very welcome! Glad we could help.
It worked for me!! Thank you!
Excellent! Thank you very much for watching! Please like, subscribe, and pass it on!!!
soooo until i buy my parts. im just gonna hit stop before opening the door! TY for the video boss😊🎉
Haha 💯! Yeah as long as you fight the urge to touch that door before the light goes out you're g2g. 💡💥😑
Thank you for watching and supporting the channel.
Have a wonderful day!
Thankyou.
You're welcome!
Thank you for watching and supporting the channel.
Have a wonderful day!
It worked. Thank you
You're welcome.
Thank you for watching and supporting the channel.
Have a wonderful day!
I love UA-cam!!! Thanks for the help brother 🤝🏽
Anytime 👊💥! Glad we were able to help you out!
Thanks for watching and supporting the channel.
Have a wonderful day!
Exact problem on my GE, meanwhile it’s same hooks assembly. Thanks!
Hey Vladimir,
Good deal. Glad you were able to get it figured out.
Thank you for watching and remember to like and subscribe to support the channel.
Great info
U got my working again 😊
So glad it helped! Thanks for watching and have a great day!
Worked for me ty
Hey Joel,
Glad that was able to get you going!
Have a wonderful day!
Thank you!
Hey!
You're welcome!
Thank you for watching and supporting the channel.
Have a wonderful day!!!
It worked!! Thanks a lot!
Hey!
That's great to hear!
You're welcome; we are glad to help. Have a wonderful day.
Thank you so much. You are a genius. How the hell did you figure that out.
My unit is built in more than most. So a big job to change.
Hey,
Thank you for your kind words! I'm happy to hear we were able to help you. 😊 Good job on working to find a solution!
Have a wonderful day!
Thank you so much! Exactly what was wrong with mine. 👍. Just earned a follow as well!
Hey Shannon!
That's great to hear x 2! Thank you and have a wonderful day!
It worked! Amazing
Hey!
Great, now your cookin' lol.
Thanks for watching and supporting the channel.
Have a wonderful day!
I just fixed mine, thank you!!!
Hey!
Excellent! You're very welcome.
Thank you for watching and supporting the channel.
Have a wonderful day!
My problem was a bug had crawled under the circuit board and eventually shorted it out on my GE over the oven unit. This is actually the second time it happened on this unit. This time it was cheaper to just buy a new unit rather the whole button/circuit board.
to make sure it does not happen with the new unit I placed some metal screen over the vent area of the circuit board area.
Oh no! Not the typical "bug" you'd expect to find in a circuit. Bet you it won't have the guts to do that again! Kudos for good, Ole fashioned ingenuity. Thanks for watching!
I worked at this for a while trying to adjust the switches and replace the switches, and replace the plastic switch holders. After looking at the schematic for my Kenmore, what I did was replace the upper microswitch with an Omron SPDT switch where I could connect to the normally closed terminal (was clipped off on the factory switch). The microswitches are the Omron D3V "Miniature Basic Switch" for reference. On the upper switch, the factory wiring connects the normally open terminal to input AC Power, and the common connection connects to the magnetron already. What I did that was the modification was to connect the previously unconnected terminal from the upper switch to the connector for the lower magnetron discharge switch, on the leg not connected to the magnetron. The lower magnetron discharge microswitch is now not connected. So basically what I did was to use the upper switch for both functions required when the door opens (cut power and discharge the magnetron). The magnetron is (already) connected to the common terminal on the upper switch, and was already connected to power on the normally open terminal. I just connected the normally closed terminal to execute the same function that the lower magnetron discharge switch did. Same functionality, but now just on one switch rather than attempting to synchronize 2 separate mechanical switches to achieve the same functionality. I made the new connection by making a male to female spade lug jumper cable, so didn't have to cut any factory wires. Works great. No more breaker tripping and the unit turns off and grounds the magnetron when the door is opened while operating.
Hey! Good thinking! That solves both issues. No more microswitch that nuisance trips due to poor location; all while maintaining full functionality. I like that a alot. Switch selection is key... my monitor switch is a normally open and the other two are normally closed, so one wouldn't want to mix that up. The SPDT would work in my situation also. (D3V-16G-1C25-K) Again good thinking!
Thank you for watching.
Have a wonderful day!
Thank you
Anytime 😊
Thanks for watching and supporting the channel!
Have a wonderful day!
Thank you this helped me out! 👍
Hey Spencer!
We are glad we could help.
Thank you for watching and supporting the channel.
Have a wonderful day.
Problem solved
Thanks sir
You are very welcome! Glad we could help.
Thanks for watching and supporting the channel.
Have a wonderful day!
Nice.. I will try it out today, Thank you
Hey,
Sounds good. Let us know how it goes.
Thank you for watching and supporting the channel.
Have a wonderful day!!
@@thelarewsdo Thank you!! Work like a charm, took me only 10 minutes!! You got a Subscriber..👍
Excellent all the way around! 😀
Thank you so much i have same issue i saw your video and you safe my time and money.
Please share the link where i have to order the part and please send me the video how to change the part thanks again.
GOD BLESS you
You're welcome. Like, subscribe and click the bell. I'm trying to get a free minute to put together another video showing an improved workaround.
I need 1 more question i need to replace door latch hook or door switch?
If your issue is fixed by unhooking the monitor switch, like in our video, then the next video will show you. We'll be upgrading a switch. But to answer your question, the door latch that holds the three switches is normally what is worn and is causing the monitor switch to malfunction.
@@thelarewsdo i just un plugged bottom one and my microwave was working fine.
Okay sure i am waiting for your new video
Hey thanks for the video. I have exact microwave. I removed the second switch because the button wasnt clicking. I pryed the plastic cover off to have a look and somehow it started clicking again. Put cover on and its been just fine. I ordered the 3 switches for 13 bucks just to have incase it starts happening again.
Hey,
Great to hear! Yeah, the contact tips on the switch melt together due to the arcing cause by the short. Remember the problem is caused by the slack in the latch that activates the switches out of sync.
Have a wonderful day. Thanks for watching and supporting the channel.
Thank you! It worked ❤
That's great to hear! You're welcome.
Thank you for watching and supporting the channel.
Have a wonderful day!
Hi have fridgidaire, i have replaced all the door swtiches. Was good for 4 months again same issue. I dont think its the switches its just the door latches. My family aslo does the same thing. I am gonna do what you did and will see.
Hey! Sounds like a plan! If you hooked all the switches back up after replacing them the issue could still be the bracket that holds them. Remember, the wear on the bracket is what causes the monitor switch to close when it's not supposed to and that's what trips the breaker.
Thank you for watching; please like and subscribe to support the channel.
Have a wonderful day!
Worked perfectly for me! Thanks! Do I really need to replace the other two switches now that I am back in business?
I'd say you're g2g if it passes the normal function tests. Good Job!
Good video
Thank you!
Hope it helps.
Thank you for watching and supporting the channel.
Have a wonderful day!
Thank you so much for your video. I reset the clock on my microwave yesterday after a power outage which is option 3. My microwave only has four options by the way and to turn off the display mode on mine it's option 4.
I waited for it off to display and pressed the start button and now my microwave is working properly again after turning off after 3 seconds for some mysterious reason.
I cannot recommend this Frigidaire microwave because of this convoluted option system for changing settings. The manual gives completely wrong instructions on how to operate it or even do something simple like changing the time. I appreciate your video
You're welcome.
Thank you for watching.
Have a wonderful day!
You save me 200$. Thanks you so much…
Hey! Happy to help.
Have a wonderful day!
On the key pad there is a PAUSE button....that is there for a reason. You do not pause a microwave by opening the door while it is running. Hit pause to STOP the power to the switches THEN open the door and then you don't care which switch opens or closes...there is no power to them AND you don't care where you grab the handle to open it. NO more problems with that middle pad switch getting the contacts burnt.
Hey! Thank you!
I'm sure that 98% of people that view this video realize that. But, over the course of owning a microwave there are extenuating circumstances or "late for work instances" where protocol isn't followed to the 'T'. The summation of these instances is what causes the issue. Life happens.
P.S. Pressing the pause button just opens a set of contacts, under load, that stops the microwave; no different than opening the door.
Have a wonderful day and thank you for watching.
@@thelarewsdo PS...no it don't and why the big Shabelle about following things to a T if it don't matter? Why is pause on the key pad?? I fix them ALL the time and NO ONE uses pause.....or the ones burning the contacts together in that switch don't.
I don't disagree that pressing the pause button would aid in decreasing the particular issue people are having and is good practice. Though, ultimately, by using the microwave daily over many years the latch naturally will continue to wear and the issue with the monitor switch prematurely closing becomes inevitable. I didn't exactly understand what you were getting at with your retort about following protocol to a T, but I think I can answer your question with a question. Why doesn't everyone drive exactly the speed limit or only press the elevator button once...
And relays are simply actuated switches. So yes, when you press the pause button you are dropping out power to the coil on the relay which disconnects power under load from the magnetron, vent fan....
Best wishes. Keep on repairing and be safe.
If you hit the shut off button and do not open the door while power is on, that works too, but it's a hard thing to remember, we as so used to pulling the door open.. and we are blowing the fuse every time, too bad my TV box is on the same circuit, takes forever to reboot that Comcast Box..
Lol yep. Life happens and we get in hurry sometimes.
Thanks for watching and supporting the channel.
Have a wonderful day!
Sorry I didn’t understand one part. So when we disconnect the bottoms switch. Do we leave that one disconnected and reconnect everything else after? Or disconnect and reconnect? Great video by the way, been struggling with this microwave.
Hey! No worries. I disconnected the monitor switch (it's not the bottom one in my microwave; its the 2nd of the 3) and left it disconnected and everything else gets hooked back up.
Hope this helps.
Thank you for watching and supporting the channel.
Have a wonderful day!
How essential is it to replace to the monitor switch ? I disconnected it and micro wave works just fine.
Hey Mike,
Our is still unhooked. 😉 I have a new video to make to show a quick fix that I'm working on that will put all the safeties back without the hassle .
Thanks for watching and supporting the channel.
Have a wonderful day!
Yes! If I have the microwave and air fryer on at once the breaker gets tripped and shuts everything off in the kitchen! Also,I hear popping and crackling from the breaker box when the microwave is on.🙄🙄😞😞
Hey,
The breaker is getting overloaded. Your kitchen breaker is probably a 20 amp breaker. The microwave pulls ~12 amps and the air frier pulls ~12 amps so combined your are at 24+ amps; That's why it's tripping. You may want to check if the outlets on your counter are on different breakers and move your air frier to a different location. The popping and cracking in the breaker box means the screw holding the wire into the breaker is loose and needs tightened; this needs addressed asap. The popping and cracking is arcing which can lead to a fire. It's a super easy fix, BUT requires knowledge of electricity to safely fix it.
Hope this helps answer your questions. Thank you for watching.
This happened to me last night
@@thelarewsdoSomething that I always thought about is to install one 30amp circuit in the Kitchen with 20amp outlets with 10/2 wire and two 20amp circuits with 12/2 wire in the kitchen!! Then you will have plenty of electricity!!
Hey Dimitri,
Interesting idea, but I have a few thoughts.
10 gauge wire is a bear to work with as far as bending and "squishing" into single outlet boxes. Plus, I'm not to sure that most 15/20 amp outlets are designed to adequately secure 10 gauge wire behind the terminals. If you breaker panel is large enough, one thought would be to home run each of your kitchen outlets with 12 gauge wire. This will give you 20 amps available at each outlet, it isolates the appliances and the wire is easier to work with.
Hope this helps. Have a wonderful day and thank you for watching.
@@thelarewsdo Ok thank you.
Thank you sir. It worked for me. If I just leave it like that without buying a new one is that going to cause me some kind of electrical problem?
Hey,
You're welcome! Since that is one of 3 safeties, you should be fine; there are still two safeties still in the circuit. Now, if you were wanting to put it back to 100%, remember it's not the switch that is causing the real issue. The wear on the latch is what is causing the switch to activate when it shouldn't, so you'd have to replace the latch.
Thank you for watching! Remember to like and subscribe.
Have a wonderful day!
Thank you very much buddy I appreciate you. Will do. Have a great weekend
Any time. Have a great weekend as well.
Thanks …this worked until I can get the part . How long could I use this fix …I just to make sure it’s safe . Thanks again
Hey!
Great to hear! We've been using ours, how you saw it in the video, since we made the video. We actually have a nifty, permanent, better than factory fix that hopefully 🤞 I'll get installed and videoed with in the next week.
Thank you for watching and supporting the channel.
Have a wonderful day!
@thelarewsdo do you have a video of this nifty fix yet?
Lol I've had the part for 6 months. But the upgrade has been moved to the long list. The fall is "slower" for us so I hope to have an evening or two to video the upgrade and upload it.
Thanks for reminding me! Click the bell to be notified of our future videos; this will probably be our next one. 😀
@@thelarewsdo My man! For now I bypassed the monitor switch and it appears to work just fine without blowing the fuse. It stops the microwave when I open the door mid operation. However, lamp no longer works - is this normal? I checked the switches and the conifiguration is top (NC), middle (NO - this is the one i disconnected), bottom (NO). Do you think this could be a safety issue?
Hey,
If memory serves me the monitor grounds the magnetron or something of that nature.( actively discharging the circuit) I don't see it as a safty concern, unless your everyday practice is to pull the door open before the microwave stops or without pressing stop. Is there any chance the light is a seperate issue? Bulb burnt out or you didn't get one of the plugs seated on the circuit board?
Great video, much appreciated. Question. Your saying that your circuit breaker gets popped when this issue happens. Wouldn't the fuse blow first? I have went through 5 fuses in last 8 months and I finally (duh) decided to dig into the root cause. I saw your video and just replaced all three door switches. Fingers crossed. If it happens again, I will disconnect the monitor switch as you suggested. If that doesn't do.......I'm done! LOL. Thanks again for your video help.
Hey,
You're welcome and thank you!
The fuse is protecting the control circuit, but the monitor issue is on the power side; That's why it blows the breaker.
Let me know how it goes.
Thank you for watching and supporting the channel
Have a wonderful day!
@@thelarewsdo Hi again. Well dangit!! After 10 days the fuse blew again. Do you think by unpluging the monitor switch (which was popping your circuit breaker) this might finally solve my fuse blowing issue? Many thanks again!
Hey,
At this point, you wouldn't be out of anything to give it a try. What style and amperage of fuse are you using? (slow blow or fast blow style fuse)
@@thelarewsdo I'm not sure what the fuse type is called. It's a 20Amp glass with a solid metal strip.
@@thelarewsdo Ok, I unplugged the monitor switch. Fingers crossed, wish me luck...
Thank you very much. It worked but now the issue is whenever I am opening the door the fan starts running. I am afraid that is it just a fan or it starts cooking even when the door is open. Please provide your input asap.
Hey,
Check back through previous comments, this is kind of a common issue also. I'd say one of your other switches is welded together and is stuck in the "on" position.
The switches can be carefully split apart and unwelded, assuming they're not too damaged, or they can be replaced by purchasing them on Amazon or digi key.
Thank you for watching and supporting the channel.
Have a wonderful day!
Thanks for your quick reply, but I am not able to identify other switches. Can you please help me to locate that switches.
In the video around the 3:05 min. mark I mention interlock switches. Those are the other two of the 3 switches.
@thelarewsdo love you, man. It worked. You made my day and saved $.