I've coined him the "BRUCE WAYNE" of eskate. He has us all in shock and awe with his engineering and radicological approach.NuttyDr.Jekel Proffessor Hyde. He gets the Einstein-FrankenBorder award too. Aloha Kami
Awesome! Suggestion... rather than using those flat-ish wide wheels, I believe you'd have better luck with a rounded wheel profile. Obviously larger wheels will make them smoother over rougher surfaces. I would think something like the original CloudWheels 120mm would be a great fit for these skates if they fit, or something a little smaller with that rounded profile. Your turning will be far smoother and more effortless.
Thank you for watching! Ok, I agree with the wheel you said about the turn. But on the other hand, these skates will be heavy, and because these skates can easily accelerate and achieve high speeds, I think stability is more important than anything else. So I tried this wheel :)
*Omg you built one!!* 😲 ⚡️🤟🏽⚡️ Is there anythin you can't build 🔥🔥 Omg you used Mad Wheelz and belt drive for electric rollerskate build! 🤩🤩 I would love to see how you plan the builds, fully or partially plan. All the little sounds, I'm not into ASMR but I love the sounds in your build videos bro. Amazin build video, no-one builds AND films/edits it together as good as this. I don't rollerskate, scared of the electric ones but This one I would ride, you are a "Mad" scientist bro 🔥 I am Sooo lookin forward to the ride video!!
Thank you for saying that and watching. Bro :) First of all, I imagine a lot about what might be possible. Then, once my thoughts are somewhat organized, I spend some time looking for the parts. And when the actual parts are gathered, simulation work is done, and if it seems possible, DIY work begins. This is the DIY process that I usually run. And I'm looking forward to it too!!!
Thank you :) I'm always here and I will continue to create DIY content as long as I have more ideas. However, it takes a lot of time and effort to get that idea. ㅜ..ㅠ'
7070 is massive overkill I have same motors on my 25kg mountainboard. Are you going to run a dual vesc with long phase wires or 2 x vesc with a wireless canbus link. I recon option a with 85D and VX4 remote. Meepo 105 hubs would have been easier but this looks awesome. Might follow your plans.
That's why I also said that those motors were overspec. I needed high revving motors for this build and those were the only 170Kv motors I had. So I had no choice but to use it. And please wait until the next video to find out what to do :) Thank you for watching!
No, I didn't put such a detailed measurement cut in the video, but I did the measurement before I put the binding on it. and there was no problem :) Thank you for watching!
Hi kami. Please be careful when using the angle grinder with gloves. It's recommended to not use gloves with such rotary tools because if they catch, it pulls your whole hand. My uncle lost 2 fingers a few years ago because of that
Can you do a comparison video between Endeavor Pro 2 and Acedec nyx z3 please and give your opinion on the two of them, i suppose you don't need to say which is better if you dont want but at least the difference. Thank you and have a nice day. I appreciate the videos you do they very professionally done.
First of all, I experienced both boards and both were good boards. However, the things I felt were as follows. - Endeavor Pro 2 : Powerful performance yet very smooth. Movements are generally flexible. So it was suitable for enjoying off-roading comfortably. - Acedec nyx z3 : The power performance is more powerful than Endeavor, and the initial torque is especially good, making it good for off-road destruction. The movement performance is more solid than Endeavor, so it has a good sense of stability. So it was suitable for enjoying off-road dynamically. I think you can choose depending on your preferred riding style. Hope this helps :)
스케이트 보드용 바퀴를 채용하신 이유가 있을까요? 접촉면이 평평한 바퀴는 직선주행시 안정성을 줄 수 있지만 회전 시 회전각이 엄청 넓거나(거의 안되거나) 균형을 잡기 어려워 보여서요. (자동차 타이어를 이륜차에 적용하지 못하는 이유와 같습니다) 일반적인 인라인스케이트용 바퀴 처럼 원형의 바퀴가 더 적합하지 않나 싶어 댓글 남겼습니다.
Yes, I agree. In my case, you wouldn't have been able to see me using it in the video because I even tested it and then I used that. Thank you for watching :)
Temu ripoff means it's a good enough idea that people want it, and that's good for people without DIY skills. The PEV revolution is taking off pretty quickly
It's been a while since I've put my passion into it. I'm also looking forward to seeing it completed ASAP :)
오랜만에 열정을 쏟았습니다. 저도 빨리 완성되길 기대하고 있습니다.
Looks sick! I have a question, what do you do with the boards you get for reviews but don't have space to keep? Also, are you based near Seoul?
I've coined him the "BRUCE WAYNE" of eskate. He has us all in shock and awe with his engineering and radicological approach.NuttyDr.Jekel Proffessor Hyde. He gets the Einstein-FrankenBorder award too. Aloha Kami
Aloha!!! Thank you for saying that and watching too :)
Looks cool. Can't wait to see you test them. A new challenge is vital for body, soul and mind
Thank you for saying that and watching :)
How do your table and stuff remain so white??
I guess I have a mysophobia. lol :)
Thank you for coming bro!
Awesome! Suggestion... rather than using those flat-ish wide wheels, I believe you'd have better luck with a rounded wheel profile. Obviously larger wheels will make them smoother over rougher surfaces. I would think something like the original CloudWheels 120mm would be a great fit for these skates if they fit, or something a little smaller with that rounded profile. Your turning will be far smoother and more effortless.
Thank you for watching!
Ok, I agree with the wheel you said about the turn.
But on the other hand, these skates will be heavy, and because these skates can easily accelerate and achieve high speeds, I think stability is more important than anything else.
So I tried this wheel :)
@@KAMiJUINs I'm sure you'll end up testing different wheels, if so, let us know what you find!
I got it!
The way you managed the motor mounted inside is giving me some ideas
That's sounds good
Thank you for watching :)
Wow this is a interesting diy build E-Inline sk8 and perfect material selection for a prototype build
Thank you for saying that bro :)
*Omg you built one!!* 😲
⚡️🤟🏽⚡️
Is there anythin you can't build 🔥🔥
Omg you used Mad Wheelz and belt drive for electric rollerskate build! 🤩🤩
I would love to see how you plan the builds, fully or partially plan. All the little sounds, I'm not into ASMR but I love the sounds in your build videos bro.
Amazin build video, no-one builds AND films/edits it together as good as this. I don't rollerskate, scared of the electric ones but This one I would ride, you are a "Mad" scientist bro 🔥
I am Sooo lookin forward to the ride video!!
Thank you for saying that and watching. Bro :)
First of all, I imagine a lot about what might be possible. Then, once my thoughts are somewhat organized, I spend some time looking for the parts.
And when the actual parts are gathered, simulation work is done, and if it seems possible, DIY work begins.
This is the DIY process that I usually run.
And I'm looking forward to it too!!!
I am heavily invested in this as if it turns out to be good, they would be awesome to commute to work on!
I hope so too! Thank you for watching :)
U make it seem so easy to
Make.im looking forward to see how it rides.😊
비디오에서만 쉬운거 아시죠 ㅋ
Very cool. Curious, are you going to put an esc and battery in each foot or are you going to run them to a power pack/backpack type situation?
Please wait until the next video :)
Thank you for watching!
This is awesome. Is this your own design? I would %100 pay for this. These are going to be FAST
Thank you for watching :)
Of course, it's my idea.
If it has enough battery bolts, it can be fast.
Absolute lunacy, I love it, well done, I look forward to you pushing these to the limits.
Thank you for watching :)
Your projects are amazing, such a great engineer
Thank you for saying that :)
jet set radioooooooooo
Thank you for watching
Awesome! Wait for part2 and tube wheels for bad roads :)
Thank you for watching :)
We missed your DIY skills buddy, good think Your'e back ❤
Thank you :)
I'm always here and I will continue to create DIY content as long as I have more ideas.
However, it takes a lot of time and effort to get that idea. ㅜ..ㅠ'
@@KAMiJUINs in deed Kami, in Did. Thanks Bro 👍🏻👍🏻👍🏻👍🏻
damn it look so nice , great job 😎, but how do you install the batteries and the controller?
Thank you for watching :) and please wait until the next video!
Kami X Batman e-blades 😆 Fantastic 🤩🤩🤩!!!
Why the Batman? haha
Thank you for watching :)
@@KAMiJUINs Because of big black wheels looks like "Batman begins" 's bike.
so hyped for part two of this 😆got me watching Air Gear
7070 is massive overkill I have same motors on my 25kg mountainboard. Are you going to run a dual vesc with long phase wires or 2 x vesc with a wireless canbus link. I recon option a with 85D and VX4 remote. Meepo 105 hubs would have been easier but this looks awesome. Might follow your plans.
That's why I also said that those motors were overspec. I needed high revving motors for this build and those were the only 170Kv motors I had. So I had no choice but to use it.
And please wait until the next video to find out what to do :)
Thank you for watching!
Hey kami do you know what esc is compatible with the batterie of the pivot GT?? Love your videos btw
In my opinion, Flipsky's V4 ESC series or TENKA are sufficient replacements.
Thank you for watching :)
@@KAMiJUINs thank you
Amazing BUILD Brother!
Ciao, My brother :)
Thank you for coming and watching!
I've always wanted to build real Air Gear!! Soo cool!!
You should try if i'm done :)
I need to see these in action😂
Yeah so do i :)
New use for MAD wheels!
Because it's nice and cool
I wish I had more Mad Wheels. I have a lot to use lol!
Thank you for coming bro :)
I wonder if the little standoffs can handle the torque 🤔
Considering that, I'll match a battery with a lower voltage.
bro that is cool, can't wait for part 2!!!
Thank you for watching :)
What's next? DIY a KAMi junior! i mean that's just awesome.
Thanks as always bro :)
hello, my friend, that a cool diy e-skate. really i love this. i am happy to see the result.
Thank you for saying like that and Watching it too, bro :)
Hello from Australia 🇦🇺 Unbelievable 😮 i can't wait for your next video 😊
Hello there :) thank you for watching, and I'll be back as soon as I can!
Wont your heels hit the motors?
No, I didn't put such a detailed measurement cut in the video, but I did the measurement before I put the binding on it. and there was no problem :)
Thank you for watching!
What is the cost of materials? Thanks
- carbon fiber bars & sheets = about $200
- Motors = $108 x 2
- Snowboard bindings = $130
- Hardwears = $15
- MAD Wheelz V2 Stealth + Pulleys = $139
- Motor mounts = $30 x2
In addition, battery, ESC, remote, and enclosure costs will be added.
Hi kami. Please be careful when using the angle grinder with gloves. It's recommended to not use gloves with such rotary tools because if they catch, it pulls your whole hand. My uncle lost 2 fingers a few years ago because of that
Thanks for letting me know, I'll be more careful too.
Woah! Can’t wait to see the ride 😅
Thank you for coming brother :)
"on top to break the chain, no pain, dont be afraid"
Thank you for watching :)
Alright, now that's pretty cool.
Thank you for coming mate :)
Can you do a comparison video between Endeavor Pro 2 and Acedec nyx z3 please and give your opinion on the two of them, i suppose you don't need to say which is better if you dont want but at least the difference. Thank you and have a nice day. I appreciate the videos you do they very professionally done.
First of all, I experienced both boards and both were good boards. However, the things I felt were as follows.
- Endeavor Pro 2 : Powerful performance yet very smooth. Movements are generally flexible. So it was suitable for enjoying off-roading comfortably.
- Acedec nyx z3 : The power performance is more powerful than Endeavor, and the initial torque is especially good, making it good for off-road destruction. The movement
performance is more solid than Endeavor, so it has a good sense of stability. So it was suitable for enjoying off-road dynamically.
I think you can choose depending on your preferred riding style. Hope this helps :)
@KAMiJUINs thank you. I'm an off-road rider so thank you for your opinion, keep up the good work
Omg omg omg! I want that! Here in Canada, hockey is the most popular sport so electric skates will be awesome. Can i pay u to make me one?
Thank you for your words, and watching too :)
Looks great!
Thank you for watching bro :)
Thank you
Thank you for watching too :)
now this kind of content that I waiting the most
HAHA thanks for that :)
uuuu and now i remember old anime Air Gear
Yeah, a lot of people say the same thing as you!
Thank you for watching :)
Oh shit we about to get some "air gear" in this bih lol
I actually don't know the animation but a lot of people are commenting on it.lol
Thank you for watching!
Fear of doing splits on skates has increased
WHY..... ㅠ..ㅜ'
Thank you for watching!
Open the sky!!!
Sick 🔥🔥🔥👏👏
Thank you for watching for a long time, Bro :)
오 후속편 기대하고 있을게요 +_+
네~ 시청감사합니다!
Interesting concept bro
Thank you for watching :)
i love this
Thank you :)
스케이트 보드용 바퀴를 채용하신 이유가 있을까요?
접촉면이 평평한 바퀴는 직선주행시 안정성을 줄 수 있지만 회전 시 회전각이 엄청 넓거나(거의 안되거나) 균형을 잡기 어려워 보여서요. (자동차 타이어를 이륜차에 적용하지 못하는 이유와 같습니다)
일반적인 인라인스케이트용 바퀴 처럼 원형의 바퀴가 더 적합하지 않나 싶어 댓글 남겼습니다.
1. 일단 동력을 연결할수 있어야 하기때문에 보드용바퀴를 사용했습니다.
2. 동력으로 움직이기에 속도가 꽤 있습니다. 그래서 회전각 보다는 직진 안전성이 더 중요했습니다.
Dude made airgears
Yeah, a lot of people say the same thing as you!
Thank you for watching :)
Eskate genius
HAHA Thank you for saying that :)
Прикольный способ разъебениться без управления с такими колесами.
Спасибо за просмотр :)
Nice work…. So hurry up .., yr killing us with curiosity. Thank you
HAHA... Please don't rush me ㅜ..ㅠ'
Thank you for watching :)
don't forget to locktite em up ^^
Yes, I agree. In my case, you wouldn't have been able to see me using it in the video because I even tested it and then I used that.
Thank you for watching :)
@@KAMiJUINs gotcha, amazing build ❤️
owh its storm regalia
Thank you for watching :)
실주행 영상이 기대가 됩니다 정말 대단하시네요
말씀과 시청 감사합니다.~
i see laready TEMU ripp off XD
Temu ripoff means it's a good enough idea that people want it, and that's good for people without DIY skills. The PEV revolution is taking off pretty quickly
Thank you for watching :)
Ferb i know what we're gonna do today
Thank you for watching :)
이런 영상은 힐링이 되네요 멋있습니다
그랬다니 보람있네요 :) 시청감사합니다~
AIR GEAR IS REAL!
I actually don't know the animation but a lot of people are commenting on it.lol
Thank you for watching!
와...진짜 신박한 아이템 등장하네요``
네 이번에 한번 시도해봤습니다 :) 시청감사합니다.~
엥 한국인이셨어요???
네~
🎉전에 영상에서 봤던 E인라인스케이트 기억나네
다만 얘는 바퀴가 두꺼운
Yes, I made it heavier :)
damn i dm you, and you followed me for a second and unfollowed
??? What do you mean?