Architects3DP MEGA - X axis structure 2/2 #10

In the tenth episode, I am finishing the build of the X AXIS of the Architects3DP MEGA big size 3D Printer.
To have a look at Sakata 3D FIlaments webpage:
sakata3d.com
The Architects3DP MEGA is our most ambitious project so far here at Architects3DP. With this series, I'm gonna show you how to build a big 3D Printer, but also with industrial quality components for a low price.
Due to the BIG size of the Architects3DP MEGA 3D Printer, you'll be able to print with dual extruders, big size objects in real life scale.
Instead, if you want a standard size 3D Printer, definitively check out our Architects3DP i3 series, where we built a 250 x 240 x 200 mm DIY good quality 3D Printer for under $200.
Architects3DP i3 series here: architects3dp.com/architects3...
------------------------------------------------------------------------------------------------------------
Link for the Bill Of Materials:
bit.ly/30bnaY2
DOWNLOAD the COMPLETE 3DM MODEL:
bit.ly/2BvrFlG
DOWNLOAD the STL files for this episode:
cutt.ly/Be9MkCD
------------------------------------------------------------------------------------------------------------
The STL files to build the left and right extruders include:
- Left X axis end:
- End body
- Skate
- Belt tensioner
- Belt clip
- Right X axis end:
- End body
- Skate
- Belt tensioner
- Belt clip
------------------------------------------------------------------------------------------------------------
Architects3DP MEGA Specifications
-Dual extrusion build volume of 1.000 x 500 x 700 mm
-External size of 1.200 x 700 x 800 mm
-7" touch screen
-Up to 20 micron (0.001 inch) layer resolution
-Up to 280 °C nozzle temperature
-Open filament system - print with any 1,75 mm material
-Totally DIY Customisable Project
-Premium 3D Printer Components
-Controlled over WIFI
------------------------------------------------------------------------------------------------------------
Architects3DP MEGA - Series Structure
-#01 Project presentation
• Architects3DP MEGA - B...
-#02 Structure Design and Unboxing
• Architects3DP MEGA - S...
-#03 Structure Assembly
• Architects3DP MEGA - S...
-#04 Motion Dynamics Unboxing
• Architects3DP MEGA - M...
-#05 Extruders + hot ends Unboxing
• Architects3DP MEGA - E...
-#06 Electronics Unboxing
• Architects3DP MEGA - E...
-#07 Active Cooling Unboxing
• Architects3DP MEGA - A...
-#08 Extruders assembly
• Architects3DP MEGA - D...
- #09 X axis 1/2
• Architects3DP MEGA - X...
- #10 X axis 2/2 ----------------
-Y axis - structure
-Y axis - movement
-Z axis structure
-Z axis movement
-Power supply installation
-Electronics Assembly
-LCD Assembly
-Cooling configuration
-Heated bed installation
-Firmware configuration
-Software configuration
------------------------------------------------------------------------------------------------------------
Architects3DP MEGA - Sponsors
-DamenCNC
www.damencnc.com/nl/
-Sinerges
www.sinerges.com/
-E3D Online
e3d-online.com/
-Bondtech
www.bondtech.se/en/
-Noctua
noctua.at/
-Duet3D
duet3d.com/
-Sakata3D
sakata3d.com/es/
------------------------------------------------------------------------------------------------------------
-Support Architects3DP on Patreon here:
/ architects3dp
-Subscribe to our UA-cam Channel Clicking here:
goo.gl/UMEuL7
------------------------------------------------------------------------------------------------------------
If you want to follow us on social media to stay tuned when new content is uploaded, you will find the links in our website:
architects3dp.com
Finally I would like to propose you to become a Patron through the next link: / architects3dp
By doing that, you would make me super happy and you will also help me to keep bringing good content to the channel.
Furthermore your name will appear at the end of all the videos, and much more rewards that you can find in our Patreon page!
-See you, in the next, video!!
M4730X - Architects3DP
~-~~-~~~-~~-~
Please watch: "BEST 3D PRINTER in 2021? FOKOOS ODIN-5 F3 Review"
• BEST 3D PRINTER in 202...
~-~~-~~~-~~-~

[@TheCrash8212]

A little tip; when you cut a screw or bolt, thread a nut onto the screw above the cut point. After cutting the excess off, unthread the nut and it will chase the end thread back to straight so it can be used without cross threading.

[@architects3dp]

Thank you! very good advice! :)

[@malt0304]

Hey im looking forward to seing your return for more videos! I'm wondering how much the frame cost you in total, and what was the delivery fee? I hope you make a sheet with cost in the future, keep at it bruv :)

[@borjagancedo8183]

Nice to see you back.... are you going to finish the 3d printer... its a awesome proyect

[@architects3dp]

Thanks Borja! It definitely is! I’m just looking for some time to finish it

[@certified-forklifter]

AWESOME!

[@Andre_Beth]

When do you think you might be able to finish this printer - really looking forward to that and then starting on the build myself? Nicely done on the videos so far!! Keep going, the views and interest will come.

[@architects3dp]

Thanks so much Andre & Beth. I hope I can continue with the project soon, but unfortunately I can't give you an exact date :(

[@matti04.electronics86]

I love the MEGA, so awesome. Really enjoying your videos!

[@nicksonchang3301]

Hi there do you have good CURA settings for architecture model 3D Printing? Im using PLA and im kinda stuck when comes to settings. Thanks

[@MegaAndroidMen]

Where are you?

[@shrikept]

Quick question : why not set the x axis perpendicular to your current layout? Wouldn't a much shorter gantry reduce weight?

[@TheCrash8212]

The x axis holds two extruders. It needs the length to have a sufficient printing envelope.

[@glenmccall4571]

please oh please tell me this why my anet a8 stop printing>>> ok here what happen it was working fine until i tried to get the best settings but now it wont print a good layer.... ahhhh did all the check and replaced a few things but my layers suck they look like CRAP ! start off laying layer then does not lay down layers 4% and up it not laying them down 10% its just going through the motions and nothing

[@eyadal-junied]

where are You ?
you did a great work ..
keep on

[@architects3dp]

I hope to come back soon :)

[@eyadal-junied]

@@architects3dp
We hope to come back very very very soon

[@epofimpressao3d506]

Where are you? gave up on the project?

[@architects3dp]

It's in pause right now.. I hope to continue soon

[@DMonZ1988]

how are you dude? is everything ok?

[@matti04.electronics86]

Mmmmhhhh, those pullies don't look like they are centered. Does this make no problems?! 11:25

[@mudrsame491]

Sls and slm 3d printer is the future of print can you do slm metal 3d printer

[@architects3dp]

Hey marko, don't have any of those printers yet! but I hope some day I can =) thanks for your comment!

[@mudrsame491]

4 weeks no new

[@hpadvance53company10]

Sir I need your help.. please tell me your mail ID..
Sir my printer is working good while printing through PC..
But when I tried to print using SD card it skipps some Gcode again & again ... Nozzle dosent goes to all of the quadinates it skipps filling all the areas ... I have changed SD card and controller module..
Please tell me some suggestions

[@mudrsame491]

I make 5 dollar in patron but after 3 day my member finished so becare and some fille they will aske to pay more can tell why

[@thelightspeed3d712]

I swear I saw your hair grow and retract again.

[@architects3dp]

haha! It’s magic 😂

[@Lanmind01]

His arm hair? Haha

[@vik3706]

Are you alright

[@karipenttila2655]

Pullies are not cenrtrics, get the right ones