I did the same process as in your video, but there is a smell of smoke, but everything is well sealed, I have the following doubt: does there have a gasket or plastic between the engine and the exhaust pipe? Because there was none in mine plastic
Ked sa sruba povytiahla. Podarilo sa mi ju dostat do takeho uhla, ze sa vysunula cela a nevadil uz drziak stupacky. Najlepsie je odmontovat aj zvod z hlavy motora a demontovat to cele naraz, ako len samotny rezonator.
Dobrý den, také jsem odstranil rezonátor. Zaznamenal jste prosím nějaký rozdíl ve spotřebě? Nyní jezdím za 3,8 L dříve při stejném jízdním stylu tak o tři deci méně. Nainstaloval jsem ale také FuelX. Průběh motoru je lepší, ale spotřeba je stále i něco vyšší než s origo rezonátorem. Mám model 2022. U mě řezat nebylo třeba, ale objednával jsem trošku jinde na AliExpress, byť díl vypadá skoro stejně. Díky za inspiraci. Zvuk je nyní jako s laděným výfukem.
Dobry den, ja som hned v jazde spozoroval lepsi zatah v nizsich otackach, samozrejme aj hlucnejsi zvuk vyfuku co mi samozrejme neprekaza. Co sa tyka spotreby tak tam nevidim rozdiel, okresky 3 - 3,5l a dialnica presuny mi obcas vybehne aj 4,5l
@@jaroslavmihalco6708 Díky moc za odezvu. Určitě je to tak lepší, nějakou váhu to taky ušetřilo navíc zadní tlumič teď není namáhán teplem. Určitě mrkněte na ten FuelX. Nově má zastoupení pro Evropu ve Španělsku, přišlo to do týdne, přidá to taky nějaký zátah od spodního pásma. Já plánuji ještě nějaký filtr sportovní, možná úpravu Airboxu. S pozdravem Tomáš.
Nice video. I also have a KTM 390 Adv. I am very happy with it. What is it and where do you get the “filter” you put inside the new exhaust pipe. Thank you
@@WOSBikerthat one is the 2nd catalytic converter (not a filter, it burns unburnt fuel). theoretycally it's ileagel in most countries to remove it, or to drill it.
Hi! Did you manage to fit the cat gasket in? I think I see it on the video, but I was unable to fit the midpipe with the gasket. It is a snug fit without it. Thanks for the video.
@@jaroslavmihalco6708 at ua-cam.com/video/fI06kleM5o0/v-deo.html you are applying paste not on the original gasket then. The color of that part is same as the gasket with that lightning. Additinonally, if you use spacers and position your midpipe through the middle while tightening, you will have less noise at high rpm range.
I bought the same one, a little bit loud but not to much, in 4000km i didnt have any trouble with police, i have shorts in my account for those who are curious of how it sounds attached and warmed up
Only noise pollution :) Resonator box is designed to cancel out sound waves so the bike is quieter, therefore Euro compliant. Also, since there's less back pressure it may reduce cat efficiency and bike may run hotter since it's already lean on mixture. I would install it along with new fuel mapping just to be safe.
So, to remove the resonator... you cut to the part where you have spent some time and now there are 2 persons there.. ok.. now i see i have to unscrew a lot of things
Nice video showing the procedure.
It's one of the best upgrades for the Ktm 390 Adventure
I did the same but also punched out the cat. sounds nice not too loud and actually runs fine.
What was the goop used at the attachment ?
Brois their any problem after fixing this
I did the same process as in your video, but there is a smell of smoke, but everything is well sealed, I have the following doubt: does there have a gasket or plastic between the engine and the exhaust pipe? Because there was none in mine plastic
Hi, tighten the lead on the engine head to 20NM.
For the rest, I used exhaust mounting paste, as in the video.
Nazdar, vo videu ten dolný srôb ako si dal von čo drží rezonátor, lebo mňe to naráža do držiaku stupačky?
Ked sa sruba povytiahla. Podarilo sa mi ju dostat do takeho uhla, ze sa vysunula cela a nevadil uz drziak stupacky. Najlepsie je odmontovat aj zvod z hlavy motora a demontovat to cele naraz, ako len samotny rezonator.
Dobrý den, také jsem odstranil rezonátor. Zaznamenal jste prosím nějaký rozdíl ve spotřebě? Nyní jezdím za 3,8 L dříve při stejném jízdním stylu tak o tři deci méně. Nainstaloval jsem ale také FuelX. Průběh motoru je lepší, ale spotřeba je stále i něco vyšší než s origo rezonátorem. Mám model 2022. U mě řezat nebylo třeba, ale objednával jsem trošku jinde na AliExpress, byť díl vypadá skoro stejně. Díky za inspiraci. Zvuk je nyní jako s laděným výfukem.
Dobry den, ja som hned v jazde spozoroval lepsi zatah v nizsich otackach, samozrejme aj hlucnejsi zvuk vyfuku co mi samozrejme neprekaza. Co sa tyka spotreby tak tam nevidim rozdiel, okresky 3 - 3,5l a dialnica presuny mi obcas vybehne aj 4,5l
@@jaroslavmihalco6708 Díky moc za odezvu. Určitě je to tak lepší, nějakou váhu to taky ušetřilo navíc zadní tlumič teď není namáhán teplem. Určitě mrkněte na ten FuelX. Nově má zastoupení pro Evropu ve Španělsku, přišlo to do týdne, přidá to taky nějaký zátah od spodního pásma. Já plánuji ještě nějaký filtr sportovní, možná úpravu Airboxu. S pozdravem Tomáš.
Nice video. I also have a KTM 390 Adv. I am very happy with it. What is it and where do you get the “filter” you put inside the new exhaust pipe. Thank you
Hi, what filter do you mean?
@@jaroslavmihalco6708 At minute 3:30 you can see a part inside the exhaust pipe.
@@WOSBikerthat one is the 2nd catalytic converter (not a filter, it burns unburnt fuel).
theoretycally it's ileagel in most countries to remove it, or to drill it.
Hi! Did you manage to fit the cat gasket in? I think I see it on the video, but I was unable to fit the midpipe with the gasket. It is a snug fit without it. Thanks for the video.
Hi, not if you mean bigger gasket. I used sealing blow paste
@@jaroslavmihalco6708 at ua-cam.com/video/fI06kleM5o0/v-deo.html you are applying paste not on the original gasket then. The color of that part is same as the gasket with that lightning. Additinonally, if you use spacers and position your midpipe through the middle while tightening, you will have less noise at high rpm range.
Tanks a lot, please could you explain to me about the 3mm cut, was it necessary to do it? 2:33
The exhaust parts would not touch each other.
There would be a gap at the ALI exhaust elbow joint.
-possible leakage,
-leakage of exhaust gases
I bought the same one, a little bit loud but not to much, in 4000km i didnt have any trouble with police, i have shorts in my account for those who are curious of how it sounds attached and warmed up
Did you get a check Engine Light or something?
@@Daniel-tf5jm no
Hello. Excellent video.
Have you noticed any increase or decrease in fuel consumption after this modification?
Greetings from Costa Rica 🇨🇷
No, nothing 🙂
Where did you get the upper crash bar????
Hi, is SW-Motech
Nice video! What is the weight savings? Performance improvement? Also what is that blue thing on the exhaust?
Thank you. Weight saving is possible 2kg. The blue thing is a minimalist protector from Ali
Ahoj. Zaznamenali jste nějaké výrazné změny ve zvuku a průběhu výkonu? Dík.
@@19Ander86 Ahoj, lahsie sa rozbieha z nizsich otaciek. Zvuk je hlbsi, ale zase nijak nevadi pri vacsich presunoch
Super, díky za inspiraci. Uvažuji, že bych do toho po záruce šel.
Is their any engine or pollution issue with this after installing
Only noise pollution :) Resonator box is designed to cancel out sound waves so the bike is quieter, therefore Euro compliant. Also, since there's less back pressure it may reduce cat efficiency and bike may run hotter since it's already lean on mixture. I would install it along with new fuel mapping just to be safe.
Do i lose my warranty if i change to a full exhaust ? I got The 2022 model
Same situation and yes lose warranty. Check with my Ktm dealer
The warranty on my motorcycle has expired in 04/23
what is that paste you are putting in there ?
it is a standard high temperature paste for sealing exhaust joints
Bro i also do the same but it seems very louder how can we reduce the sound
You deleted the baffles but want it quieter?
👍New subscribe.
is 100% necesary cut the 3 mm?
I did the same removal and it wasn't.
Did you notice a change in the sound?
Hi, is a slightly deeper sound
is it catalyst inside?
Hi,
Yes, only the sound resonator is removed
This is not a cat delete ??
Thank you, video title fixed
So, to remove the resonator... you cut to the part where you have spent some time and now there are 2 persons there.. ok.. now i see i have to unscrew a lot of things
Yes, I didn't expect that either. But it's harder montage
You removed the resonator box not the cat
Thank you, video title fixed