Kenmore Whirlpool washer not spinning - agitator stop turning - replace motor coupler clutch pump
Вставка
- Опубліковано 25 сер 2024
- Documenting how i repaired my friends LSR7233BQ2 Whirlpool washer's motor coupler.
You can buy it at Amazon for less than $10: goo.gl/UA6Xq
or buy it at a local appliance store for $15.
When I first viewed this video, I did not think it was something I wanted to try. I replaced the agit dogs and thrust washer, but that didn't help a broken motor coupler. So I followed the video step by step, and now the washing machine works! Thanks.
2yr old video and it's Still giving people a great leg up! $33 and my actuator kit is on & my agitator teeth are replaced and my towels are getting the best washing they've had in a long time! Kudos my friend, followed this video to the T .. job well done!
This video saved me at least $200. I had a bad motor coupling, and didn't have a clue on what part needed changing or how to do it. BTW, letting me know the agitator head was 7/16" was a nice time saver. I'll be sure to look back at your other videos for future appliance issues. Thanks!
Thank you for this. I was able to fix my washer for 7 dollars. I'm very grateful to you. God bless you
Very helpful video. Our agitator on our Whirlpool LA9100XTN1 stopped turning, I moved the washer away from the wall and saw a round piece of rubber on the floor along with all the broken tabs. This video is great for helping diagnose the problem. I hope some other people will get as much help from this video as I did, because we were about to go buy a new washing machine. A quick trip to the parts store and about an hour of time got it up and running again. Thanks again and great job on the video.
Great Vid! Best part is showing the wife all I'll have to do to fix her overloading the washer habit!
Enjoyed your video...have one of those machines for close to 20 years
This is exactly my problem, thank you so much - you just saved me a about 300 bucks on a new washer!
Nice video--saved me a thousand bucks as I was about to go buy a new washer/dryer!! Done in a couple hours including time to get parts--19.03$ total!
Hey thank you,you video help me take apart and fix my washer...broken couple pretty easy fix with the right tools ty
Great video! Thank you for your help. I was able to repair my washer with these instructions.
Ty this saved me buying a new washer.
Good instruction and BIG help, I appreciate you. thanks
I'm not sure why you removed the gear case, I just pull the drain pump and motor to save time. For the average DIY person, this can be to much trouble and intimidating.
@lost boy 420 like the name says, u are a Lost Boy so don't add to it by being a smart azz.
Hello DIY Tinker, Thank you for the help, not sure your still active on this threat but hoping, I replaced the Clutch on my Kenmore 90 series washer that would not spin, now it spin awesomely but Now it smells like rubber burning what did I do wrong ? P.s. yes the pins was shattered on both and the old rubber pieces it connects into was oval holed, this new one fits tighter on the pins
thank you for sharing this video. I saved money by fixing it myself!!
Great video! Good tutorial!
Thank You!!! Sooooo Much for the how to video. I had the washing machine drained and the coupler removed a couple hours after watching this video.
I have an old Frigidaire washer, it will be nice to do a video on how to change the bearing , its belt driven
Thanks. Good explanations along the way. Now, I'll see if mine is similar.
GREAT vid.....so simple and saved me a ton. Thanks.
Just a bit more light would have been perfect when you were re-installing the motor and tranny. Please don't take that as trolling. What I like best about this vid is that you install the entire kit. Other videos just show replacing the dogs in the upper part of the agitator.
I have "Liked" "subscribed" and put this video on my playlist.
Thank you for a really great video!
Poiiyteqljdnbvxzz,,,,
Pouye a k I HF D's mnfxxf
Does it matter which way the wires go on the capacitor?
You did it the hard way.
i have a Kenmore. Basically the same. I had an issue where it wouldn't spin. The coupler was broken. I replaced it and it still wouldn't spin. It took me a day to get the agitator screw out because it had rusted to the point where the head was completely gone. Now I suspect the clutch and agitator dogs are broken.
Agitater dogs?
@@yooxldiyd Little gripper, swinging/latching type pieces.
This video was very helpful...Thank you!
You can do this repair by just popping the motor off of the transmission assembly with the two clips cutting the work latterly in half.
Thanks
request2012 but u can't check the clutch half ass doing the job
Great video, good thing I seen this because I almost caused myself more damage by trying to rip the motor off lmao didn't know about that 7/16 nut haha than again
I changed the coupler . Machine does not start on its own. It starts if I go underneath and move the coupler forward or backward. If I lift the lid , it stops but does not start back on its own. I have to help it.
hello, I have an older Whirlpool washer that will spin only if there's a very very small load in it. Anything larger and it won't spin. Is the problem most likely the belt?
Have you ever had the agitator cogs get worn down and cause the same problem? You can see them at 1:04 in your video. The 4 flesh colored plastic pieces? I took out my coupler and it looks fine works ok by hand, everything turns but the agitator. So before I replace the clutch I was wondering if you have ever come across that problem.
Was your problem the clutch? Everything on my washer works except agitation.
@@smaugington No at 5:38 you can see the flattened oval of the 3 prong finger fittings It looked fine until I took both pieces off. One side looked good but it was completely rounded out. No flat sides left. except for a couple of millimeters on the end that made it look ok. Diabolical if you ask me.
Great video, Thank you very much
Hi there, I accidentally unscrewed the bolts on the bottom before taking out the one inside the washer. Do I need to re-screw the bottom bolts to get out the one from the top, or is it just stuck? It's not coming out now.
Thanks for the video. I think this is what is wrong with my washer. The agitator is frozen in place and won't turn. I think this coupler is all broken up and jammed into places where it shouldn't be.
That's exactly the same issue I'm experiencing → frozen in place and won't spin.
Hopefully you can tell me if this video addressed your issue...thanx
so the couplar is responsible for agitating and spinning?
My GE washing machine is not spinning and the water smell stinky. please what do I do.
We need to remove the pump and motor then replace the coupling ..We do not remove agitator, do not remove transmission
take a big job not need it.
Great video 👍 I'm working on a Maytag central washer it spins but will not agitated dose it need water to agitate ? The dogs are good it doesn't agitate I here nothing ? Can you help please
What did it end up being?
My washer does not agitate in wash mode but still spins in the drain cycle. Is the coupler still the problem? Agitator dogs are in good shape
What ended up being the problem?
@@smaugington dont know, wife said get a new one so we got a new one!!LOL
Excuse my washer does not turn and does not start filling it What I have to do
In reconnecting the capacitor, how do you know which wire goes where?
no difference
When u say use a flathead screwdriver you men hammer. correct? And why not mention using a socket to seat the coupler instead of mentioning the hammer {screwdriver}
is it possible the coupler is made out of metal? plastic doesnt last long.
Ra's al Ghul it’s supposed to be breakable. If the transmission locks up for whatever reason you want the coupling to shear so you don’t burn the motor
Ra's al Ghul, stop over loading the machine & coupler will last a long time
Mi lavadora la enchufo y vota candela quiero saver por que y si esde corto sicuito
Over worked! To change the coupler, only need to take off water pump and motor!
How can you tell if its the coupler or the clutch assembly?
The couple can be taken out and inspected in about 5 minutes. If it is in good shape it is probably the clutch brake.
How can u tell if the dryert then usual
well I would love to tip mine on the side and work on it but it is full of clothes and water. Im not sure this is what I need to replace. Can you help me diagnose it? I was washing a load and had a small pillow in the load. It did however soak up a lot of water. When the washer went into the spin mode it started banging so I pushed in the dial to stop the washer. It came to an abrupt halt making even more noise. I then redistributed the clothes and pulled out the knob to restart the spinning process believing it was more balanced. Alas, nothing happened, now it won't spin, it won't agitate, drain, or anything. Since it would'nt restart the spin cycle I was confused, so I filled it up with water again in hopes the problem was to do with the water level. Now I can't get the water out, the clothes are a huge slopping mess, and I am very distraught please help me!!! Terina in Arkansas, it a Kenmore
sounds like you dont have any power? check your plug and fuse at the breaker box. draining shouldnt have anything to do with the agitator
You know you can do that repair without pulling the transmission. Good video though.
he's thinking ahead, checking the clutch sense he has it layed on the back, very smart,
Hi
Todo wey
next time buy alliance equipment. whirlpool, maytag and kenmore require too much work to repair
Why the hell you taking the transmission out?
this is the most wrong way to do this repair. I recommend you not follow these instructions