Samsung Galaxy Tab S6 Lite Charging Port Board Replacement P610 P615 P613
Вставка
- Опубліковано 30 тра 2024
- A step by step repair guide on how to repair and replace a broken/not working Charging Port Board on Samsung Galaxy Tab S6 Lite P610 P613 P615 (2020, 2022) tablets.
Guides you May Like
Galaxy Tab S6 Lite P610 P615 LCD Touch Screen Replacement • Samsung Galaxy Tab S6 ...
Galaxy Tab A7 Lite T220 T225 Front & Rear Camera Replacement • Samsung Galaxy Tab A7 ...
Moto G Pure Power Volume Replacement XT2163 • Motorola Moto G Pure P...
Google Pixel 6a LCD Touch Screen Replacement • Google Pixel 6a LCD To...
If our video was helpful, you can always support (for $1.99) us by becoming a member. A Joining Member will help us create more content for the community.
UA-cam Join bit.ly/3O7X5SH
Tools
Heat Mat bit.ly/3WgsPcF
Portable Heat Gun|Stations bit.ly/44Y5NLp
Premium Screwdrivers bit.ly/3DvLfOH
Premium Screwdriver| Repair tool Sets bit.ly/43JyWJl Silicone Repair Mat bit.ly/3FKUc6K
Glue | Adhesive bit.ly/3Dw2X4C
Clamps & Essentials bit.ly/3Qvm3Qf
Our Partners
bit.ly/2FSFTPv ( Gadgets & Accessory Store - Ships Worldwide)
bit.ly/2QRfYhP ( Phone & Tablet Replacement Parts - Ships Worldwide )
bit.ly/3afejcf ( Phone, Tablet Parts & Accessory Store in The UK )
Timestamps
00:00 Intro
00:10 Opening
00:54 Removing LCD screen display
02:52 Disconnect Connector Tape & Cable
04:12 Removing Mid Frame
06:18 Disconnect Battery Connector
06:24 Removing not working Galaxy Tab S6 Lite Charging Port
07:00 Placing New Galaxy Tab S6 Lite Charging Port
08:02 Connect Battery Connector
08:07 Placing Mid Frame
10:15 Placing LCD screen Display
11:14 Testing
12:26 installing the screen & Closing
#diyrepair #repair #tabs6lite - Навчання та стиль
🙂✋🇹🇷
Thanks for your feedback
Can the B-7000 glue removed easily if we need to service the tablet again with heat? I used a strong glue before but I think I applied a bit too much and the LCD ribbon to the digitizer got exposed to it and I accidentally ripped it apart when removing it because it was stuck. I ordered a new LCD, I just needed to service the connector but oh well.
just to confirm that this adhesive is for the most part easier to remove but you must apply heat, I had a pad heater that is not too expensive, you can also use a heat gun but just be careful.