Samsung Galaxy A11 Screen Replacement | M11

[@davidcameron1378]

I did this and it worked. Had a lot of mistakes but ultimately have a working phone again. Had to install buttons in the new frame. One screw did not want to go back. Finally all screws went back and everything works again. I watched this so many times! Was very helpful. Thank your!

[@DIYGeardo]

Glad you got it done.

[@davidcameron1378]

Thanks ​@@DIYGeardo. My son promises to take better care of this one.

[@ivanskaggs6284]

how did you get the button installed?

[@davidcameron1378]

@@ivanskaggs6284 the buttons are not much more than a sticker. I ordered them off of Amazon and carefully applied it to the frame to match the original.

[@chinnareid3254]

I got the frame without the buttons. But it was really easy to transfer, to the new frame ( just be gentle and apply a little heat to unstick) and it works. Thank you for the breakdown, it helped me a lot.
Edit: I didn't have a heat gun. Used a blow dryer on low setting.

[@DIYGeardo]

Great and thanks for sharing

[@104jewels.]

Just replaced the battery/screen on my moms A11 phone watching this step by step.. Thank you ♥️♥️♥️

[@ILoveGTAV]

I'm watching this on samsung galaxy a11

[@DIYGeardo]

Great

[@MindfulMusings1]

For those who were able to buy frames with buttons, where did you purchase your frame & screen combo? We bought a set and the innards didnt fit because it wasnt up to standard sizing. Sent back and looking a new combo.

[@davidcameron1378]

I followed your video again. This time accidentally disconnected one of the antenna wires from the tiney snap it is crimped to. But soldered it back after much cursing under my breath. The phone is fully functional again. Many thanks!

[@rotigaming9077]

Excellent video much better than other videos how to replace display

[@DIYGeardo]

Thanks for your feedback..

[@WRod1464]

Awesome video, fallowed all the steps. One thing wasn’t covered, I had to remove the strip for the power and volume bottoms from the old case. The new one did not have it. But all worked out, wife is happy. Thank you so much for the video.

[@DIYGeardo]

Thanks for the message. Normally Power button comes with the frame. But sometimes it may not. But anyways, glad you got fixed the device.

[@ronnieandaya5850]

Sir how did you transfer the power button to another frame?

[@DIYGeardo]

@@ronnieandaya5850 sorry we miss that part, normally it comes with the frame. Can you check our a12 screen replacement guide. You can follow that to remove the button flex

[@ronnieandaya5850]

@@DIYGeardo thank you sir

[@dominickwiley4727]

Bruh, if it wasn't for this comment, my cousin would be ordering a new phone by now. You're a lifesaver!

[@elikamil7651]

thank you very much for the good tutorial sir..

[@DIYGeardo]

You are most welcome

[@plasticsman10]

You sir are a genius. Thank you for this video.

[@DIYGeardo]

Thanks for your feedback

[@glenjamin7]

Thanks for a great video.
You helped me out much friend.

[@DIYGeardo]

Glad I could help

[@arfnzr_]

Sir both use same lcd and frame body? I wanna change my lcd n frame body but seller say a11/m11 do the both same spare parts? ?

[@TikTok143]

Thanks..new sub for a very detailed and informative video. Keep it up mate.

[@DIYGeardo]

Thanks, will do!

[@nicolaspopoca2041]

Wow it work

[@DIYGeardo]

Great..

[@alldogsgoheaven]

Where did u buy tools n screen???

[@lexisj1825]

Why after fixing the screen speaker don't work? What cause the speaker to stop working?

[@oliverxe7354]

wow Impressive

[@DIYGeardo]

Thanks for your feedback

[@xxliving_tribunalxx1908]

1:05 Does any type of heat gun work?
10:12 Does any type of super glue like gorilla glue work for it? I'm just curious because I wanna make sure I don't screw up the button at all.

[@DIYGeardo]

Most likely yes , do not use super glue or strong ones..

[@codyvilleneuve2181]

Use a hairdryer

[@haydenhartman2038]

The heat gun link only shows a soldering kit, is there another part needed to switch the soldering tip to a heat gun?

[@myriamavila481]

Excellent video! Geardo; Do you have the part number?

[@DIYGeardo]

What is your phone model number?

[@christ1stjessicaramirez133]

Can I use a Blow dryer?

[@DIYGeardo]

Yeah, can you control the heat?

[@notjinyu]

@@DIYGeardo my can

[@karmen9514]

Could the issue be that i accidentally knocked out the other connectors when the battery qas attached? If so will a another new screen work? Already took it completely apart and tried putting it back. It booted up then turn off. Or did i ruin the battery? Just trying to get it on to get photos.

[@Angel-vm7sl]

Is this the same as modle: SM-S115DL (GP) trying to figure iut if this is the A11 for getting the right screan to replace looks exatly like the one in video taredowen

[@DIYGeardo]

Yeah should be the same..so far there is only one screen type for this model

[@aliciacruz4509]

Can be done without dissable?

[@karmen9514]

Did it and it worked at first but i forgot the buttons. Now the screen just flashes on then off😢

[@MindfulMusings1]

Were you able to take it apart and readd the buttons?

[@athindwalane4124]

Help. My phone had a broken screen asked a guy to have it fixed came back with mic not working, people can only hear me on loudspeaker. A day later it went black but works typing from it as we speak but it's dark with no light.

[@DIYGeardo]

So looks like your ear speaker got damaged.. you need to replace that...And regarding the screen, seems it is faulty unit or something went wrong in the repair job ( i cannot say 100%, just can be due to the faulty ear piece too). Talk to the tech, this should be an easy fix..

[@lexisj1825]

I replaced two of these and the speaker wont work in both cases. The speaker is not broken, there is something wrong with moving the speaker to another assembly case. Next time I will replace only the screen without disassembling the unit.

[@trainman1209]

I'm here to change the screen protector. What's all this disassembly in Indian Language?

[@DIYGeardo]

This is changing the screen display, not the screen protector.

[@alldogsgoheaven]

... My phone started getting warm n heating up physically so I put it in the freezer of the fridge for 1 minute n then took it out of the freezer n then the screen lights went out on my phone but my phone is still on like it gets messages but the screen doesn't want to show any pixels it's just pitch black... will this video fix the pixels to turn on or does this video just help wt broken glass cracked screen repair type of vid????...... I'm using an iPad to write this comment bcuz my galaxy a11 doesn't wanna turn tha lights on tha screen... it makes noises like I got a message n I can higher tha ringtone n stuff but I cant see anything on my screen

[@DIYGeardo]

what you can do is , open the phone and disconnect the battery plug and the lcd plug..Reconnect it and make sure connections are secured..turn on the device, if you still have the same issue, then you might need a new screen to test the issue.

[@Flam3Emp3ror_Sabo]

i think i took out the battery wrong... lol while i was taking it out i saw a red thing so

[@bbibbifairyheart2812]

I have m11 and i want to replace it with a11 screen and frame is it possible?

[@DIYGeardo]

Steps are almost identical, but the frame is slightly different..

[@bbibbifairyheart2812]

@@DIYGeardo ok thanks

[@mxolisisiyabonga8348]

But I need new screen for Samsung Galaxy A11

[@mxolisisiyabonga8348]

@@DIYGeardo But my phone need new screen for Samsung Galaxy A11

[@shaminelanburns2002]

I cant find an M11 screen in my area. is it possible to fit an A11 screen on my M11?

[@DIYGeardo]

Not compatible

[@shaminelanburns2002]

@@DIYGeardo Actually, some replacement screens from A11 may work as there are different models of this phone. I recently found out for myself as I couldnt find any m11 screens which lead me to try the a11. If anyone out there decides to try an a11 for an m11 or vice versa, make sure you are able to return the replacement screen before taking the risk.

[@northernlights9637]

So basically you take the whole phone apart ...no thanks

[@DIYGeardo]

If you get part with the frame, then yes, but without the frame No, but most ideal repair part will be screen with frame. Also a11 is fairly easy device to repair