Japanese Mini Truck Rust Encapsulation
Вставка
- Опубліковано 5 вер 2020
- Please Like, Comment, and Share. Be sure to subscribe for future videos. Don't forget to hit the bell icon for notifications. UA-cam has changed what they show subscribers!
Subaru Specialty Tools - www.amazon.com/shop/mrsubaru1...
Subaru OEM Parts - www.amazon.com/shop/mrsubaru1...
Must Have Tools - www.amazon.com/shop/mrsubaru1...
StoreFront - www.amazon.com/shop/mrsubaru1387
If you like the vids and want to help make more: paypal.me/MrSubaru1387
----I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not myself.---- - Авто та транспорт
I've been working on my truck all week, just little things, and I love how much easier this thing is to work on compared to my Z 😂 So far I did a valve cover gasket, replaced the flasher relay, air filter/oil change, spark plugs and just some other general maintenance. So easy and rewarding.
Notification squad! Where you at? 🔔
right here haha. also I have some questions regarding a 95 JDM Subaru WRX I just picked up. Is there a way to get in contact with you?
@@shuba097 what ya got going on?
@@MrSubaru1387 it appears as though the previous owner put way to much Subaru cooling conditioner in it (its on it third flush and still not all out) and then I heard a squeak while driving (almost like a wheel bearing) went away, came back way worse then "CLUNK" my MPH dropped from 60 to 0 quick but the rest of the car was fine. (car has no ABS because it didn't come with it ) then lastly the power mode light is flashing a code at me and I can't decipher it.
Hey, 2017 WRX. AC just started randomly not blowing cold especially at idle in traffic. AC clutch?
Western NC!
Oddly enough I recently bought a 94 Sambar and am trying to get all the info I can. It’s still about a month away from the states. Really stoked about finding this channel since I am not even remotely a mechanic and I know I’ll be doing all the work on it. SUBBED
Welcome to the channel!
man, wish i coulda told ya a pro tip i learned a while back. you could have taken off the drum, sprayed it down real good with PB blaster, let is soak and evaporate on its own, then wire brushed the drum, then spray with brake cleaner and wipe clean, then spray with paint... woulda came out like new. that PB blaster does wonders on oxidation. magical stuff, but im sure you know this. still tho, looks great. nice choice of rim.
The Subaru EN07 is one of the few Japanese kei trucks that has non-interference valves. So you shouldn't have to worry about snapping a timing belt and causing damage... You'll just be stuck or need a tow.
What a cool truck. Something like that would be perfect for me. A no nonsense just around town light duty truck.
It's a great little machine. Definitely draws attention lol.
A UA-cam Mechanic that is not afraid to admit he forgot tools/equipment/supplies. Well, I identity with him. I subscribed.
I've had trouble getting small things from Japan lately, unless you want an expensive shipping option. That or the fact they're waiting for the shipping container to be full before sending it are likely why you're still waiting. There are several places in the US that specialize in these trucks.
You don't need classes to learn to weld, youtube videos and practice, but classes will definitely make you a better welder. I bought a welder, taught myself, and welded the back end of a Fiero back together.
Another no-nonsense down to earth video full of information!
Whoever installed your tires is awesome they got the lowest spot of the tire with that dot to your valve stem Most tire guys don’t even care
I installed and balanced them myself at my buddy's shop. 😂
Just found this playlist. I really like these trucks wish I could have one myself!
You should have painted the calipers red. That's good for +5 MPH. 😛 I looked at 12 Toyota 4Runners around Cincinnati and EVERY one of them had severe rust on the rear frame, painted over with black Rust-Oleum. I could tap the frame with my finger and a teaspoon of bubbly loose rust flakes covered in black paint would fall off. I hate used car dealers. I love my Hijet. Tons of fun and it's easy to work on it. Wish parts were easier to find in the US.
that thing is cutee, i thought it was bigger until I saw you standing in front of it at the end
Mr Subaru, We're becoming Sambar fans. Cool little utility vehicle!
Love these videos. It lets me live vicariously through you till i get my honda kei truck. P.s. love all the tool videos as well.
Thanks!
looks good!
Look forward to every video!
Thank you!
missed this yesterday ... was busy under the subaru lol
Any improvement is a good one
That's a heck of a drive for some none ethenol fuel lol cool lil truck and nice scenic drive!
like this series, you think about working on old Subaru's as part of a series, thnx for the vids👍👍
that mini truck is so cool
Thanks!
Hello Mr.Subie a video upgrading brakes for a outback please. Also to reduce corrosion on the lower ball joint pinch bolt would you recomend covering the bolt with loctite 222 ?
I've been a long time Subaru fan and do almost all my own work. I am buying a 2.0L turbo long block (fully disassembled) and I wanna build it into a future replacement for my 2.2L. any words of advice or tools that you think I should get? I've never built a whole ass engine
My rear hatch indicator stopped working on the instrument cluster of my 2008 Outback, works on the rest of the doors, can you tell me where that switch is on the hatch? It's fun watching you work on all those Subis. Happy Labor Day.
Where did you get your tires and rims?
Thats light rust for Michigan we don't notice rust until it eats holes in stuff I put on new control arms in winter time salt ate the paint in lil over a month looked just like those drums at starting point
I would love a Sambar but due to California’s stupid emissions laws it’s unlikely I’ll be able to get one
At about 5:10 you mentioned a company in North Carolina that manufactures coil over shocks for kei trucks. Can you let us know what that company is?
Yeah we need to know where to get the right coil overs for Sambar's
what brake parts cleaner do you put into the red non aerosol sure shot can that you have? I've been looking into getting a similar can to yours and I'm curious what sort of products you use that are effective?
I use Wearever brand from Advance Auto. Comes in a 5 gallon can.
Love your content. I am a Canadian based in western Japan so if you ever need someone to hunt something down for you, please get in touch. My ride is a 96 HiJet.
Hey mate. Just bought a 91 Sambar. Your videos have been really helpful just doing comparison and such. You do a good job. Was curious, did you ever find a good source for shocks on these?
You can get genuine straight from Japan. Amayama.com or Japanparts.com. Found a seller in Romania on eBay as well.
@@MrSubaru1387 speedy gonzales on the replies. Thanks again, Mate.
@@MrSubaru1387 Sorry. I was lazy. Found it just by clicking through. Thanks again!
Is that extension attachment on your sure shot spray can sold separately?
It is.
I’m having a subaru related issue is there a way to ask you some questions and run somethings by you ?
will a caliper piston wrench work on a 2004 wrx rear calipers ?
I can't recall off hand if they're regular compression reset or if they are screw in calipers.
I like this rims, pretty subi looking. Is it TE37 ?
Tanabe SSR Type-C
What type of tires and wheel is on your Subaru truck?I have the same truck you have and wanting to put different tires and wheels on it.
Tanabe SSR Type-C wheels.
Are they 14” and what is the back spacing
What's your opinion on gates trimming belt kit water pump etc
Junk. Buy Aisin.
Thank you. I'll be replacing it with the Aisin before anything craps out.
You need the backup alert that Jimmy Oakes put on his! Hilarious! It’s got a knockoff Disney tune and a female Japanese voice warns everyone to watch out.
It has a back up alarm from the factory. Lol Again being a "commercial" vehicle.
Contact HP logic in F L for parts
Have you tried ordering parts from partsouq.com? I used to get lots of my oem parts for my GTB Legacy from there.
I haven't, but you're the 2nd or 3rd to mention them.
@@MrSubaru1387 I highly recommend them. I was able to get parts that my local dealer told me didn't exist. Also fairly reasonable shipping. And fast too!
I it would be funny if your lug nut torque is 88.9 foot pounds
120Nm so 88.5ftlbs
what kind of impact gun are you using? it looks very lightweight!
Milwaukee M12 stubby
What’s the lug nut adapter you’re using for the m12 stubby? I’ve been looking for it but have been striking out
That's the key for the lugs. They lock.
MrSubaru1387 looks different like it was a direct 1/2” to 6 spline thanks
No. This gun is 3/8" version. Using a shallow 3/8" 19mm socket and the lug key.
You should use rustoleum black BBQ paint as it ultra high heat and is very forgiving in terms of how may coats you apply. Always drys even even with overspray. Great stuff! I will admit, don't love the tool videos as I am a poor shlep who can't afford tools ROFL!.
Didn't think about that. Sounds like it would work great on the coolant pipes.
Well give it a try next time, might take a little longer to dry / cure but will give life long protection and a very nice finish that cures even across the entire surface.
How did you get that truck?
I bought it. Lol
@@MrSubaru1387 🤣
I see a Sambar for sale on Craigslist. I'd buy it if it could be registered in Californiastan
What is the name of the group playing during your drive. Nearly time for me to upgrade from Bon Jovi.
Can't recall. Was a royalty free song from UA-cam's music library.
Hello Barry,
That song is called Land of My Fathers by The 126ers
Bingo. That's it. 👍🏻
That's not rust..... that's seasoning.....
^Massachusetts
😂 😂 😂 Why is it spicy?
one of the first! that's rare for me
My 2003 Tacoma got more rust than that LOL.
1