Z1 cold air intake install!! | G37
Вставка
- Опубліковано 13 чер 2020
- Wassup guys , the G37 is getting ready to put down some serious vq number. Tune in for the build. After installing the cold air intakes I didnt notice a power difference besides a noticeable low end torque between 1k -4k rpm.
Music: Dome
Musician: Jef
Music: Golden
Musician: Jef
Music: With You In The Morning
Musician: Carl Storm
Music: July
Musician: Jef - Авто та транспорт
The g37 and 370z are the same engine 😂🙄🙄
Engine bay looks really clean with the intakes. Love it!
Mines supposed to come today! If all works out ill be putting the intakes and a 25 row oil cooler on this weekend!
Just wanted to say thank you, and also give a FYI tip for the future. Those little tabs on the MAF sensor, if they are in a hard to reach spot, if you slide a 12mm Socket over them, they come right out without fighting with them. Just if you ever need to get one off in a bad spot. Thanks again for the video.
~Gary
Does anybody have a link to where I could acquire hydro shields or prefilters for this intake system ?
this was a great video I will be ordering this kit for my G37x sedan, and not to worry the 370 and g37 rock the same motor that's why the literature on everything said 370z
No issues anywhere even if it’s AWD ?
My buddy ordered a takeda intake but doesn’t fit the X coupe
Did you have any problems installing these since you’re all wheel drive I just ordered these for the g37x and I’m wondering if it’ll just be the same
Automatic my subbed after this video. I wanna get intakes on a low budget and z1 are in a great ranged.
Bro great video🔥
Why do you need to delete pcv to run a 3" intake???
You installed the down pipes from the throttle plates backwards
Are does dry air filter are they required oil when cleaning?
I think you have to take out another piece where the intake goes through that tight spot
370z instructions because it's the same VQ motor regardless of the body style.. so the fitment will still be the same😎
How do u know which way to put MAF sensors?
Maaan as sick as they are and look, I’d be scared of water and moisture entering the engine. I haven’t really examined my bumper on the g37 but is it pretty secured? If you already mentioned it in the video, my apologies I skipped to the end for final finish and sound. Sounds amazing and looks even better!
I’m buying these soon, I just wanted to see how easy the installation was. Why would you be concerned about water or moisture entering the engine?
@@deserttan37 water in the intake could cause your engine to get water locked
I’d recommend getting a wrap for the intake I drive the car as a daily driver during the winter with a wrap you can find online and have zero problems
thanx for the vid bro .....I'm thinking of getting the for my 08 g37.
So overall are you happy with the intakes?? was it worth it?
Do not buy bolt ons i highly recommended saving for forced induction.
@@Jeremy_boi I WOULD . . . . . . . . .but I just CANT Justify spending $10,000 on a Mod just to make my car go faster . . .as a 44 yr old guy with kids to feed. 🤣😂 so I''ll just stick to smaller mods that might not make that much of a difference and just have fun with it that way..🤣😂😂🔰
@@johnboy5632 watch my latest video itll explain why not go fbo
@@johnboy5632 never heard someone say don’t go fbo 😂it’s a first step for a lot of people don’t listen too that bs
If the intake it’s in the front grill , what ever the rain wouldn’t it suck in water and hydro lock?
They sell filter covers for rainy conditions. I drove with them in the rain plenty of times but I wouldn't recommend it tho
It's not an issue the stock air boxes pull air from the same place anyways basically this kit relocates the filters
nice video
Tell me because I just ordered the z1 cold air intakes. How many hp and torque you would say you gain if running on a stock exhaust. Let's say the G at 330 now with the z1 how much
It is said to add around 15-20 hp
Look on z1 vid they did a untuned dyno and a tuned dyno the untuned got 23 whp and the tuned got 35whp
@@jaredtaras6224 Yeah but every car owner has different setups all around I can't make what this guy has if he running more than a stock exhaust or headers or etc
@@nelsonortiz9909 In the vid he had test pipes only and he dyno before the intake and after before the 370 with test pipes made 300 whp and then they put in the z1 intake with the test pipes and made 324 whp untuned
Did you put a hydroshield on it? If yes what brand?
You possibly installed your mafs backwards aswell throwing the code
Nah I sold the intakes and still have to code p2a00 tracking it down now. Before the turbo install
@@Jeremy_boi holy shit ur turboing it! How many miles and stock block?
@@Jeremy_boi how did you sell the intakes?
@@alejandroshernandez2525 I sold it to a guy on fb with a pretty good deal so they got sold in a day.
@@Jeremy_boi would you recommend this type of intake over drop in performance filters? Through research it seems like it doesn’t do much. Apparently those k&n filters give a decent return for just a 100$. What’s your opinion?
What about when it rains does it not suck the water in?
Through the bumper? You shouldn't have any water unless u have holes in that part of the bumper...or drive thru a pool, u can always get hydro sheilds
Reason for the 370 parts is because it’s the same motor
I knew that before I brought the car , main reason as to why I brought it. I was worried bc they have different front end
In my opinion your charge pipes are mixed. Make maf a bitch when upside down
Am I supposed to disconnect the battery ?
Nope
I thought ur supposed to so the ECU can reset
@@saved1777 idk if an ecu resets itself I just did some cleaning on my maf sensors and throttle body’s and I had to reprogram the ecu
You don’t need a tune for this intake?
you need a tune for any intake u get
@@aoakifn7092 you don't need a tune, but it will get you an increase in HP
Why your check engine light on?
Got a I multiple cylinder misfire , tracking it down now , and test pipes
Tuner Dub please do a video on these fixes !!!
@@thegs2122 I will bros. Subscribe for future content!
@@Jeremy_boiu need a tune for 3 inch and 2.5 inch intakes
Actually Z1 still make more power then the Stillen !!! Stillen intakes on a g suck
Did you gain power.
I got stillen gen 3s for $90. Dude didn’t know what he had 😂
LMFAOOOOOOOO IM CRYING .. fucking steaaaaaallllllllll
Damn
Could you have not just installed the intakes without removing the bumper it looks like you had plenty of access when you removed the radiator top splash guard
So you can install intakes without removing the bumper? It just harder?
Cringe on the wot on a cold engine! Otherwise ok install.
Yeah I usually don't do that but wasn't gonna wait 20 mins to warm up. Sorry bros.
Maf is not supposed to face down its supposed to face up.
Instructions from Z1 tell you the MAF faces down with their kit.
370z parts fit G37. 350z parts fit G35
I do think the cold air setuo on these cars is pretty nice but even after driving one id never want to daily drive them, all that pwr isnt effective until you get to 65mph at least. Little turbo 4 cylinders are the way to go these days
Disagree it’s much more fun to daily a 6 banger. I would never go back to a 4 banger
I love mine as a daily lol my friend has a brand new WRX and was impressed how much zippier mine was
U put these on backwords.thats why they didn't fit correctly
I was yelling at the video the whole time
😂😂😂
Dude, instead of spending money for intakes. Spend some money on nice cleaning products. Looks shit under the hood and the paint looks like garbage.
Paint cost way more than it would cost to get intakes
Boohoo