2016 Yamaha Banshee 350
Вставка
- Опубліковано 1 жов 2024
- Yamaha Banshee 350 freshly rebuild in 2016. It had been a couple of years since the Banshee saw a fresh top end so I decided to tear her down. While she was apart I went ahead and replaced the crank as well. Just a little video to show the parts going together and then my first couple of test rides around Crazy D's backyard.
If you are new to TrailBlogger please subscribe here bit.ly/2yGh7yS
More Raptor ATV Trail Riding Videos bit.ly/2DfB4kn
Banshee ATV Trail Riding Videos bit.ly/2Q5zjbZ
YXZ1000R UTV Trail Riding Videos bit.ly/2PtH9PH
TrailBlogger Season 6 bit.ly/2Q8As2K
TrailBlogger Season 5 bit.ly/2Q6jK3P
TrailBlogger Season 4 bit.ly/2RsxVAH
TrailBlogger Season 3 bit.ly/2yI9mIN
TrailBlogger Season 2 bit.ly/2EQqIZJ
TrailBlogger Season 1 bit.ly/2SzRc4e
Royalty free rights for the background music titled "Dub Metal" by artist "Transphere" in this TrailBlogger youtube video were purchased from the website audiojungle.com using the envatomarket. Music URL is audiojungle.net...
Royalty free rights for the background music titled "Action Power" in this TrailBlogger youtube video were purchased from the website audiojungle.com using the envatomarket. Music URL is audiojungle.net...
thats engine porn right there
Dude, this video is awesome; the music goes perfect, NICE edit! I thought you were shredding a golf course at first
LOL golf course would have been fun. Just my buddy's backyard
Michael Sabo hey sabo how bright were the headlights you put on your banshee? I told this guy I hated that bar he replaced stock lights with but he said he needed something bright
95 haters on here. that thing is nasty 👍💸💲💵 can i get that
not for sale but thanks for leaving a comment bud
The most appropriately named machine of all time
agreed
AGREED! she is a screamer lol
AntiPlatitude can't forget about the Suzuki LT500r aka quadzilla
rip grass😂
lol just mowin the lawn with my banshee
it's cool but its not a "2016" It's rebuilt 1998 banshee.
this is true. I came as close as I could ;-)
+TrailBlogger hey I was about to trade my yfz for a banshee. what f do you think? mine is a 2008 yfz 45 se and he has a 2001 banshee basically brand new with 50 hours on it build with almost all aftermarket parts,. what do you think? thanks
+mxshee 450 very hard to say without seeing both machines
+TrailBlogger do you have instagram I could show u threw that?
+mxshee 450 Personally, I would. As long as it runs like it should, it's a fucking banshee! Lol
Badass! Best quad ever produced I miss my 99. I need another... Racing street bikes forced me to sell all my dirt toys.
opposite here, I sold all my street bikes and went all dirt haha
You should get an External Mic and do some vloggs. Would be cool. Nice job on that rebuild sounds very very smooth.
+TRX Vlogger That's a great idea, I don't talk much and you can usually hear me if I do talk though. I might switch to the open back clear case for my gopro so the audio is better this summer when the trails dry out. I have always run it in the waterproof clear case.
Oh I seee I just figured it would be awesome. The audio is already great as is 8)
+TRX Vlogger haha. Cool to see my favorite motovlogger on here lol.
469K NOT BAD!!! THANKS EVERYONE WHO WATCHED AND LEFT A COOL COMMENT BELOW
The little mean green machine
my girlfriend has this. I have a Honda. which is better, and should I get this?
+robloxdude101 in my opinion ride whatever you enjoy more bud. maybe she will let you ride hers for a test ride first to see if you like it? personally the Banshee has completely ruined just about every other quad for me because they all just feel slow now lol. The 700 still has a lot of power and the 450 is really agile, great for jumping and cornering but the Banshee is the only one that will absolutely scream at you. that being said don't worry about what your girlfriend rides, just enjoy the ride! what kind of honda do you have?
473K THANKS FOR WATCHING EVERYBODY!!!!!
that build came out sick!!!! great job dude.
+Tony B thanks man!
Good to see it back again 👍🏻 good job 💪🏻
+NicoJay 4WD thank you sir!
It would be better if you got a stock Yamaha OEM crank rebuilt, It would last much longer than a hot rods crank since they're made from cheaper parts..
how can i tell what year my banshee is? the vin can not be found there also is no sign of it being grinded off or scratched off, i have the engine number though! Please Help ASAP thank you!
Everybody needs to protest against Yamaha to see if they would make another banshee, stock banshee and a stock 450 are basically the same thing just the banshee is a lot more responsive and is a two stroke. #BRINGBACKTHEBANSHEE
Except 2012 was the last year they made Banshee's...2006 usa 2008 Europe 2012 Australia
Nice quad man. Repping the Toomey's? You need to put you a small jump out there. 👍🏼
rear axle adjustment and new raving coil wires installed
ua-cam.com/video/Xrxch_-E9wE/v-deo.html
I wanna hear that thing wide open at the dunes
I have a couple of dune videos posted with her opened up but not since the last rebuild.
you earned a sub XD
thanks for posting...I'm tired as hell ...I was riding with ya..lolol
thanks for riding along lol
Yaaaasss get these banshee vids going
+Noah Komar roger wilco!
Makes me miss my banshee! I have a zilla now but I love the shee too! It had a bunch of problems that I just got fed up with and ended up selling her. One day I'll get another one! How much did the rebuild cost you after all the parts and such?
+Brandon Peter A little under $1000 for the top and bottom end kits, billet clutch basket, chain and sprockets.
My buddy is thinking of trading his 06 YFZ for a 2001 banshee and is worried that it won't perform in a MX track unless he spends $2k on a front suspension set up. The banshee already has the wider axle and has been bored out to 390 something I think.
Well just tighten the suspension
You can use stock OEM from yfz450 shocks on a banshee look it up its really easy to do..
Time for a new set of rear tires :P
+TheMillst0ne what you don't like my tires??? :-P
+TrailBlogger hahaha they're wicked tires...when they actually got rubber left on the tread xD
Did I say bad ass ? And when I say bad ass I mean real good! I couldn't read what clutch basket you used seeing how I'm old as fuck ! BRAaPpp!!!
thank you sir, clutch basket is a Chariot!
I found your channel because of that fl350 you had. Keep up the great work. Btw any more videos on that? I'm looking to do the same to mine
sorry to say i sold that little red gem to buy the raptor 700. love my raptor but definitely miss the odyssey 350 as well. good luck with the restore!
this sounds like a nitro rc car with an expansion chamber on it😂
the soudn of a twin cylinder two two stroke is a thing of beauty
Why did you take the head lights off?
the LED light bar is one thousand times better for night riding but i actually took off and put some round LEDs on it. search for my 2019 yamaha banshee video for the latest rebuild, this one was a few years ago now.
@@trailblogger ok
my first ride on one was a twin 350 built and it did scare me it was really that fast been a 2 stroke dirt bike guy and it was way more then I ever felt endless butterflies!!!!!!
it's like Siamese dirt bike engines melded together at the crankshaft. the banshee will "ruin" you because after riding a well tuned two stroke twin nothing else will feel the same. the only other thing I have rode that came close was my 600cc street bike
For those tires to only have about 30% tread left they sure did hook up well at the end lol! Thanks for posting TrailBlogger.
+dellstudio10 haha yeah they still hookup great, one reason I haven't gotten new ones. They hook good but also let me drift too
one day she will be mine.
What tires are those? My Honda 250sx has a pair just like them..
they are ITP Spider Tracs and from what I understand they do not make them anymore. The closest I have found are the kenda bear claws.
Yea.. me too. Awesome. The tread on mine are still great. Thanks
That is sweet I want one now
Sounds good. Do u have any vids on a MX track
+jasonneal no but hopefully soon! I mainly ride trails
i want a 2016 banshee where do i get one lol ;). Cant wait to have my two smoker back up and running this week.
you can do it! just find one cheap you like and focus on the stuff it needs to make it reliable again
best thing ever
dang a 2 stroke quad, I didn't know they existex
How much did the complete rebuild cost and how often do you have to rebuild a banshee ?
the top and bottom rebuild kit was $599 on ebay from seller inland_atv here is a link to the kit I used ua-cam.com/video/pjeI9VDmj64/v-deo.html
I bought my banshee used for $1500, I spent about $500 on the clutch and single carb kit to get it running right. so I paid about $2000 then I ran that for about a year. After a year I decided to rebuild it and put a fresh top end in it (piston and rings) for about $200. I ran that for about more years and decided to upgrade it to a cool head and replace the top and bottom end with fresh everything. That was the kit that I just used which cost me $599. you can ride it for a few years in between top ends if you are take care of it and don't mistreat the engine. Do you break in heat cycles correctly and don't overrev the engine more than needed. I tend to ride the living crap out of mine so I rebuilt it sooner than later in order to avoid catastrophe and just to keep it running smooth with plenty of power.
TrailBlogger
Thinking about getting one. Needs a little work but for 1000$. I might pick her up.
DO IT! I love my banshee lol
*Ending was the best lol!!*
_Can't wait to get mine done and see what 100Hp Feels like under my ass!!_
that monster you are putting together is gonna be one nasty machine. looking forward to seeing it scare the poop out of AG Snakeman
haha you like that ending?? i wanted to go out with a bang
TrailBlogger Should upload that into a video itself lol!
***** i think I am going to! everybody likes to see a good ATV wreck lol
+StarPuss www.ToxicRedNeck.Com this was the first time I looped her out because the carb stuck on one side (little brass piece wore out) ua-cam.com/video/svMcCed_OAc/v-deo.html
Looks like she's sorted now mate, good stuff.
+Fitzy Holden yeah we got her all fixed up again!
478k views 😵😵😵😵😵😵😵😵😵😵
Nice Video Guess What You Have Another Subscriber Its Me
+FURTURE XballerX ha thanks for watching and subscribing man
Nice build btw man it came out great and looks nice
totally wiped I live in California and have a stock 350 bansee which is really fun to ride
same here, this video was recorded in northern california
Tried my buddies freshly rebuilt Banshee today. I loved it. The power on that thing coming from my 04 YFZ450 was nuts! It was also the first time I'd ever ridden a 2 stroke and I want one now. I'm just concerned about how reliable the engine will be. But I also have the same concern on my 450. I don't like going hard on it because it feels ratty at high RPM and just doesn't make confortable power going fast like the Banshee did. So, I looked online and there's a person nearby willing to trade his 01 Banshee with some goodies on it for a 4 stroke. Do you think it would be worth it for me to trade him my YFZ450? I play in pits a lot but most of my riding is on roads and the banshee felt much more comfortable in that element. Thanks
well everyone has their preference bud. I love the two stroke but enjoy having a four stroke in the herd to switch it up and ride also. I have the Banshee 350, a YFZ450, and a Raptor 700. If you held a gun to my head and made me pick just one I would say the Banshee stays. You can setup either of those quads to do any style of riding (trails vs moto vs drag vs hill climber etc) I keep my quad trail friendly, it is a relatively mild build but still scary enough that I enjoy riding it. Speaking for reliability, the banshee will require a set of rings once in awhile but the four strokes need their valves adjusted occasionally or major catastrophic failure can happen. Neither is a big deal if you are comfortable working on bikes. A Banshee will last a long time in between builds if you don't over rev and run good pre-mix oil, keep your air filters clean etc. Same can be said for a four stroke though if you take good care of it, change oil frequently, let is warm up in between rides, and like I said check/adjust those valves at the right maintenance intervals. They are both a lot of fun and have their advantages, the two stroke twin is a screamer while the four stroke singles have a ton of low end torque available.
+TrailBlogger I see. thanks for the input. like I said, I do a lot of open roads and the YFZ just feels like it's unhappy. I don't like going slow. And it doesn't feel right when I try to go quick down a road. I think i might try to do a trade
ZerunoxRides339 my dad switched from his 3rd banshee to a yfz back in November of 03 when they first released it and although he loved all three banshees his yfz beat them by a mile and my dad couldn't be bothered to let anyone else ride his baby. sadly we sold it to move closer to my grandparents along with all our other quads but we're looking to get back into it
Nice bike bro! 🔥🔥 Keep up the good vids 👍🏼
+Alec Westbrook thank you!
horsepower bro ???
not sure never had her on a dyno
trailblogger for the light bar what did you do for power bridge rectifier? float ground? or did you get a dc stator
all stock electronics bud
Hey man quick question I have a 4 mil banshee with the same single carb set up as you and I can't figure the right jetting what jetting do you run?
188 main with a 50 pilot in a 35mm PWK
+TrailBlogger okay I'll try it this single carb has been giving me problems but I'm gonna keep trying it and do you think I need to get better reeds
What kinda shocks are you using
thats fucking badass i love it
What's the gague on your right fender?? I'm just curious sweet banshee man
its a temp gauge hooked into my radiator line
nice ending i think most off us with a banshee have been caught out like that hahah
+Cairnsyspook yeah it had been awhile, she definitely reminded me why they call it banshee! First time I got my banshee one of the carbs was sticking wide open occasionally- went to pull a wheelie and bam! smacked the six pack rack in the back and layed her out.
sometimes I wish I had one.....then I realize i can't go mud ridding anymore if I had one...........
true they are not deep mud machines. fun for skimming but if you get stuck in line and slowed down they do sink lol
green monstr!
ahaha. you didn't even let off the gas. you said fuck it. whatever happens..happens XD. You'll see a vid of my shee this week bro ✊
hahaha i was wondering when someone was going to notice that. after my foot reached for the rear brake in and missed it i knew i had reached the point of no return and decided to just eject instead. after that she went for a little ride without me
+TrailBlogger lol she still doesn't know to walk by her own I guess....
Nir Hason no she went all crazy after I let go lol
+TrailBlogger haha she was like I'm done letting you ride me. get off me bitch!lol. got my shee back yesterday bro!update vid coming today!!!
Hey TrailBlogger good videos keep them up. I had a question maybe u can help me out my banshee keeps on spewing out coolant when I run it and it usually does it with in 20 min any ideas on what it could be.
+MrWasaby if you bike is overheating that could be from a lean condition caused by an air leak. you might also take your water pump apart and makes sure the bearing and impeller are all in good shape. If your water pumpe gear or impeller goes out it won't cycle the coolant through the head like it should and it will boil over the overflow tube. Is it coming from the overflow? You can check for air leaks by doing a leak down check.
+TrailBlogger thanks for the quick reply. it's actually coming from the front in the radiator on the right hand side I tried looking at it when it leaks but I guess I'll have to take the front plastics to get a better look.
MrWasaby could be as simple as a bad radiator cap or it could be overheating and your overflow tube isnt hooked into the radiator at the overflow like it should be. I run an inline temp gauge on my banshee and it really helped out- you know right away if there is something wrong because the temp will go up quick
what kind of front shocks do you have
alright man simple but gets to the point
Awesome video. That banshee awesome.
+Reptile King Thanks! appreciate the comment
great banshee man wish it was mine lol
+Jamie Johnson never too late to pick up the classifieds and fine one and make it yours :-)
Wish I had a banshee but I am stuck with a blown engine 4 wheeler:(
+220 nitro bummer!
the banshee is such a badass atv
+TrailBlogger that's one badass banshe bro keep up the great work
*banshee
Pretty cool... blast from the past
So, comparing this to a raptor 350, does the banshee have more power? I've ridden a raptor 350, but I like two strokes.
+Jebron Lames Whoops, just answered my question, nvm
+Jebron Lames yeah this is a whole different animal. banshee has a top end scream like no other atv i have ever ridden. based on an old 2 stroke twin 350cc street bike engine design
+TrailBlogger Yeah, i just remembered that most two strokes have almost twice the power as their 4 stroke brothers. Same reason why 250 four strokes compete with 125 two strokes.
what rear axle are using is it stock
what a yoke, dream to have one of these the sound is unreal , nice piloting
looks like it's running good now. just lost an axle bearing Friday. destroyed the carrier and the sprocket hub. ebay here I come
haha oh man sucks i been there. if you can look for a dual row carrier and double up on the bearings on each side. they will last a lot longer.
+TrailBlogger that's what I did. I actually upgraded everything from stock while I was in there
Craig Reimer good move, my YFZ450 and 700 both have the dual row carriers but the banshee has my "spare" carrier installed right now which is only a single row. I have a dual row aluminum carrier sitting on the shelf, just need to press some fresh bearings in there and reinstall it
Is it faster than my pw50?
are you ever going to bring back the Honda fl350?
sold it to buy the raptor 700. miss that little red gem
that should if do alot of work didnt
Damn nice bike only if it was shaft drive not chain anyways nice bike
+PLUTONIUM JUNKI I actually prefer the chain drive
Bloody hell @ the awful music, and technowobble.
LOL well I hope you enjoyed the video anyhow. can't make everyone happy I guess :-D you could always mute the video and throw on some metal
nice dude god i fkn love that sound 2stroke cammando !!!!
+Raymond J haha thanks for watching!
did the handle bars snap on the fall? can't wait to flip the 472 stroker shee hahahaha you can tell when you start feeling cocky haha
haha yeah i got a little overconfident and the banshee told me what's up. no the bars didnt snap but the front brake lever went missing in action.
i was sayin to starpuss how i want to take a day and just get used to slowly pulling the wheels a copule feet up with keeping my foot over the rear break and sitting and once im used to that start hitting the back break right when the tires come up so i get learn to control and not flip, i flipped a 1977 yz400 bike lol destroyed it haha dont want to hurt the 472 sheee been waiting to long
Ag Snakeman not the first time I looped her out messing around on the Banshee. First time it happened I was running the dual carbs and one of them stuck open when I went to pull a wheelies. Back bar hit the rocks and it was over. ua-cam.com/video/svMcCed_OAc/v-deo.html
+TrailBlogger haha I did that on our old predator 500. climbing a snowy hill in the winter quarry rocks. every pass slowly threw more snow away eventually I would get to the top and wheelie out. we'll I gave her a good shot and the quad flipped went flying and I had a dinner plate soze Bruise on my ass haha
+Ag Snakeman ditto on the dinner plate
good to see it going again
The lesson? never give up.
never!
Did you have to put silicone on your head to get it to seal all the way? My buddy just put cool heads on his banshee, and it is leaking coolant into the cylinder, we are assuming it is the o-rings not sealing properly, but they are brand new
+Nick Moskal No I didnt use any silicone on the head. I actually used a tiny bit of grease to hold the o rings in place while I installed it. you most likely pinched a ring. are just the o rings news? is the head used? have you tried laying it on something perfectly flat to make 100% sure it is flat.
+TrailBlogger it is a new head, I think he is just going to get new o-rings, what mods does your raptor have on it?
Nick Moskal raptor motor is basically with full trinity exhaust, programmer, and pro design intake.
Nick Moskal sound like he accidentally pinched a ring. high recommend grease. I know it sounds crazy but it worked great on mine.
hey i was wondering how you got the lightbar to work on there? like is it just run off a stater like a normal light or do you have a battery?
it is wired straight to the stock headlight wires. I have another video called Banshee LED light bar
ua-cam.com/video/wVRSn7gq4aE/v-deo.html
thanks man, i appreciate it!
love thes quads hve one myself best of a quad I lke the paint
thank you
I'm 13 and I'm getting my first banshee tomorrow, its. 2007
do you live in the states because they stopped making banshees in 2006 in the USA i believe 2008 in canada and 2012 in australia
last year in the us was 2006. where are you from??
Have you put that thing on a dyno since the rebuild?
no just the old butt dyno tells me she is back and stronger than ever before
i think you have the best looking banchee 350 on youtube
thank you!
had to come back n hear that crispady engine tweekin out bro hahaha fkn love it !!
haha thanks man love that sound myself. They need smell o vision for the smoke smell too
TrailBlogger that would be awsome dude lol be cool bro
thats liquid cooled right
oh boy it sounds so clean! and is quik little beast!!"
i love it
And another misleading title... What else is new right...
sorry you felt misled! hope you enjoyed the video anyhow
Phuck! I'm a die hard 2 stroke guy and ride/own multiple 2 stroke directly bikes. Man I am really thinking about finding one and doing a complete rebuild.
Or "dirt bikes."
I have owned many dirt bikes myself, some two stroke. The Banshee ruined me forever lol. I just like riding it now. I have one of our banshees setup with a single 35mm Keihin PWK carb so it hits more like a dirt bike for tighter trails and tracks, our other banshee I keep setup with the dual 28mm Mikuni stock carbs for better top speed on the flats. Fun to ride them both.
+TrailBlogger Appreciate the quick reply bud (subing just due to that) I'd go for the single carb', I ride the woods here in Colorado, and the dunes we have here, and in MOAB. This could be a blast at both man!
For the sand I would probably stick with the dual carb setup or get a larger single carb (say a single 39mm pwk instead of the 35mm pwk I run). I wanted the best throttle response I could get out of her (like a dirt bike). I ride about 95% on the dirt in the woods and only get to ride the dunes about 1 weekend a year if we are lucky enough to get time/money together for a vacation. (This year we skipped it to work on the old fixer upper house we just bought).
how about for trail riding? what would you reccomend?
The Banshee is the Best 2 stroke ATV Produced!!
seen many quadzillas, still love my Banshee more!
hey thanks she sounds nice
Talk about Yamaha Beauty.
thank you
what green paint did u use on the engine
that is VHT engine enamel
Your banshee is a beast
Nice too see it running agin I'm having truble with the carb on my lt500r
+Steven Collins are you running a Keihin or Mikuni? I run a single 35mm Keihin PWK on my Banshee. Great carb
+TrailBlogger i still have the stock mikuini flat blade it's just plane wore out from use
+Steven Collins the carb is wore out or the engine on the 500? what size mikuni carb do you run on it?
+TrailBlogger the one that came on it from factory and the engine is barley broke in it fresh I believe it's a 38mm
Steven Collins I was just wondering. The banshees comes with twin 28mm Mikunis but I have mine converted over to run on a single 35mm PWK for trail riding. Was just curious what they came with. Never rode a 500 before.
that bitch is a beast!
What's ur setup what kind of head and pistons
Hot Rods Crank (standard stroke), Wiseco pistons at 64.75mm, ADA Racing Head with 21cc domes, +4 timing, single 35mm PWK carb with a clamp on 2 stage UNI pod filter.