Is this sided for faults I have mine just stopped on one side for sound. I have not checked it out yet, but need to get inside to see where it is at. And few test for the faders. On switch on though I do get a a registered reading on the led for channel 4 of about 5 LEDs. With nothing connected.
Hi matey Where can I get the regulator parts from. I am struggling to find the exact versions. I can only find 7815A / 7915A/ 7805A Shpudl these work or do they need to be the exact versions ? I have also found a fuse on the main transformer board gone 0.75 small fuse going to an out put leg. Doh.
@@TKFElectronics I have 2 blown little fuses on the aek7007 as well. Any cheaper alternative for them that are easy to get hold of ? Thank you for your help so far by the way. I think that the last problem, but there might be issues with the other two regulator on the output board. I think the dodge cap blew the fuse as it lead straight to that. They are like 0.315amp and the main transformer one is a 0.750amp. The problem is the parts are so expensive here if you can find them, so alternatives are the next option easy to get and quarter of the price.
Sir i Have Beringer DJX900 MIXER PROBLEM IS THAT THERE ARE THREE VOLTAGE REGULATOR LIKE 7815 7915 & 7805 i cheak 7815 and get voltage on output (+15) then 7915 get output voltage -15 bt 7805 regulator getting some 2.0v and no input voltage so whats problem cos my mixer not show level indicator
Hello Sir I have Pioneer DJM-4000 Mixer The problem is that The mixer have power bt no any Buttons Lights or Any Output sound i cheak it a vlotages like -15 +15 Then (V1) is 6v (V2) is 6v Then Channel strip volteges are also proper so can u tell whats the fault
i have error 1096 on screen and stop working , after put some heat on dsp board with heat gun is working , and after cold start same problem again ,can somone explain this ? thanks
I love this video. It took my skills to the next level. Thank you.
Do you know why the ch4 was showing signal? I’m not saying you did that, but I’m curious if that is a separate fault.
Is this sided for faults I have mine just stopped on one side for sound.
I have not checked it out yet, but need to get inside to see where it is at.
And few test for the faders.
On switch on though I do get a a registered reading on the led for channel 4 of about 5 LEDs.
With nothing connected.
Might be some issues in DSP board or output board bro
Well i have solved the problems, dry joints and a cap gone pop.
But now left with same symtoms as you.
Just need ti fine these parts in the uk.
Hi matey
Where can I get the regulator parts from.
I am struggling to find the exact versions.
I can only find 7815A / 7915A/ 7805A
Shpudl these work or do they need to be the exact versions ?
I have also found a fuse on the main transformer board gone 0.75 small fuse going to an out put leg.
Doh.
Yes this no. regulator will work but be sure it is full in plastic body.
@@TKFElectronics I have 2 blown little fuses on the aek7007 as well.
Any cheaper alternative for them that are easy to get hold of ?
Thank you for your help so far by the way.
I think that the last problem, but there might be issues with the other two regulator on the output board.
I think the dodge cap blew the fuse as it lead straight to that.
They are like 0.315amp and the main transformer one is a 0.750amp.
The problem is the parts are so expensive here if you can find them, so alternatives are the next option easy to get and quarter of the price.
I get audio through channels 1-3, but channel 4 is not registering any audio. Any thoughts on what might be causing this?
Sir aap kaha se ho
Mumbai
Sir i Have Beringer DJX900 MIXER PROBLEM IS THAT THERE ARE THREE VOLTAGE REGULATOR LIKE 7815 7915 & 7805 i cheak 7815 and get voltage on output (+15) then 7915 get output voltage -15 bt 7805 regulator getting some 2.0v and no input voltage so whats problem cos my mixer not show level indicator
May be problem in DSP board
Hello Sir I have Pioneer DJM-4000 Mixer The problem is that The mixer have power bt no any Buttons Lights or Any Output sound i cheak it a vlotages like -15 +15 Then (V1) is 6v (V2) is 6v Then Channel strip volteges are also proper so can u tell whats the fault
May be problem will be in main digital board, i am not sure may be.
i have error 1096 on screen and stop working , after put some heat on dsp board with heat gun is working , and after cold start same problem again ,can somone explain this ? thanks
Hi anna
Sir you repair Behringer Xenyx X1222USB 16 Channel Mixer with USB Interface
Yes