I am a 82 year old lady . My husband and i set our new FX2 up . No problems . We have also a foam filter and a round air stone with it in our 75 gallon.So far no problems .thanks for a great product.
On my installation i cant find out how to deal with a "dropped ledge rim" it says to purchase an extra rim connector. How does this look when its hooked up?
Hi there! There's an example of this shown on page 8 of the user manual. You can download it here: fluvalaquatics.com/us/wp-content/uploads/2018/12/A213_FX2_Manual_5_lang_WEB.pdf
Hi there! That's how the filter is supposed to work - it runs for 1 minute, stops for 2 minutes to evacuate air from the canister, and then starts again. The filter will subsequently shut off for 1 minute every 12 hours to release air that may have become trapped inside the unit.
I just bought an fx 2, set it up and plugged it in. The pump made a terrible noise so I unplugged it, let the air purge out and tried again. It made the same terrible noise then everything stopped. I took it all apart, checked the impeller and there was a couple peices of sand in the impeller ( assumably from my bio media) I cleaned it all out, the impeller then moved like normal, put it all back together, plugged back in and the is a very slight hum but no flow. Any suggestions?
Hi there, we're sorry to hear about this. Our customer support team will be happy to help you - you can reach them here: fluvalaquatics.com/us/contact-us/
Hi there, we're sorry to hear about this! Noise originating from the motor suggests that the impeller assembly needs to be cleaned or replaced. As the only moving part in your filter, the impeller does eventually wear and requires periodic (yearly) replacement. Also verify that the filter has been properly primed and no air has remained trapped inside the system.
![What Do I Really Think About Canister Filters? [Fluval FX2]](http://i.ytimg.com/vi/ivOqFbdQSMg/mqdefault.jpg)
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
I am a 82 year old lady . My husband and i set our new FX2 up . No problems . We have also a foam filter and a round air stone with it in our 75 gallon.So far no problems .thanks for a great product.
We're happy to hear that! 😊
Please make house holder for tanks which are made with extra glass for support
On my installation i cant find out how to deal with a "dropped ledge rim" it says to purchase an extra rim connector. How does this look when its hooked up?
Hi there! There's an example of this shown on page 8 of the user manual. You can download it here: fluvalaquatics.com/us/wp-content/uploads/2018/12/A213_FX2_Manual_5_lang_WEB.pdf
Çok iyi bir filtre tanıtımı olmuş.
Could a 407 Intake Strainer be used on the fx filters
Hi there! No, the intake strainer for the 407 is not compatible with FX Series filters.
I cleaned my propeller and it doesn’t appear damaged at all but my fx2 only works for a minute then the motor quits.
Hi there! That's how the filter is supposed to work - it runs for 1 minute, stops for 2 minutes to evacuate air from the canister, and then starts again. The filter will subsequently shut off for 1 minute every 12 hours to release air that may have become trapped inside the unit.
I just bought an fx 2, set it up and plugged it in. The pump made a terrible noise so I unplugged it, let the air purge out and tried again. It made the same terrible noise then everything stopped. I took it all apart, checked the impeller and there was a couple peices of sand in the impeller ( assumably from my bio media) I cleaned it all out, the impeller then moved like normal, put it all back together, plugged back in and the is a very slight hum but no flow. Any suggestions?
Hi there, we're sorry to hear about this. Our customer support team will be happy to help you - you can reach them here: fluvalaquatics.com/us/contact-us/
@@fluval thank you
I noticed black rubber connectors as opposed to the grey ones in this video, are they now standard or can they be ordered?
YAjju 🎉❤🎉🎉❤
Why does my fluval sound like my washing machine??
Hi there, we're sorry to hear about this! Noise originating from the motor suggests that the impeller assembly needs to be cleaned or replaced. As the only moving part in your filter, the impeller does eventually wear and requires periodic (yearly) replacement. Also verify that the filter has been properly primed and no air has remained trapped inside the system.
Aa