Hello, does the white plastic rawl plug come in different sizes? Where can I get a packet that includes both the plug and the screw so they fit nicely? I would only need two, will I be able to buy just two from a hardware store?
Had to watch this to find out why I couldn't screw it in. Because Ikea couldn't be bothered to include TWO screws or add into the instructions that you need them. I am so stressed trying to put this thing up. But thank you for the actual good guide.
Thanks for this easy to follow demonstration! Even though there’s only a few steps, it was still necessary for me to watch this. Just got my pegboard yesterday and now I can go install it with confidence! 😊
Thanks, thats quite useful. Ikea instructions are not as good as your demonstations. I did not like that IKEA did not include those basic 2 screws required to fix tha metal rod on the wall. You have done a good job of explaining it so clearly.
Glad this helped. Yes, it is weird that they don't even give those 2 screws required to fix this board. Such items should have every tool to assemble it easily.
thanks for this, I'm a woman and I need to be independent cos my bf is busy and I don't like how he put things on my wallcos sometimes they're slant lol.
I am not sure of the numbering thing. But these are screws that are 2 inch in length. If you intend to keep heavy stuff on this, then you should go for 4 inch screws.
I'm trying to fit this board thankyou for sharing this video. Can yiu tell me the 2 screws you used were flat head type? The instructions I have on mine said I should use dome head type screw, does it matter which type?
3-4 inch regular star shaped screws and plastic plugs of the same length should be good. A little oversized screws will cause no harm. Ikea provides this screws box that has almost all the necessary screws & anchors needed for regular ikea stuff. Do purchase this - www.ikea.com/in/en/p/fixa-260-piece-screw-and-plug-set-20169248
Well, check the video from 5:16 onwards. You basically need to use the screws provided in the pack to tighten the pegboard on the bracket. The screws go in through the holes on the pegboard into the holes of the bracket. But the first step would be to mount the bracket on the wall. Hope this helps.
Hi, the screws get screwed into the metallic frame that I had installed prior to mounting the peg board. The top 2 screws go into that frame and the bottom 2 are just for support and keeping the pegboard at the same level as the top part. Hope this helps.
Hi Muhammed, 2 or 3 inch screws are fine. It will hold the weight properly. I don't remember what size is mentioned by IKEA on their user manual sheet.
THANK YOU SO MUCH! I could not figure out how to install this, the IKEA manual is garbage! You saved the day, I appreciate you, and will continue to use your videos!❤
Thanks. I used a 2inch screw to hang the rail on to the wall. The screw length depends on the type of surface that you are putting this on. But in general, a 2inch screw would do fine.
Well, if you have a glossy wall then you can use double sided tape as well. But if you mount it that way you'll have to ensure that you do not put too much weight on it.
@@TheGlovesMan Oh yeah, when installing the wall mount, I realised that the hole for the screw that is going into the wall is quite long, which part of the hole do I put the screw through?
Thanks for the simple steps to install. The manual that comes with this board is pretty confusing or not useful to me. I have one doubt, its possible to install in horizontal way instead of vertical shown in this video?
They are 2 inch screws. Depending on the weight that you are adding to this pegboard, you can either go for 2 or 3 inch screws. 3 inch ones can hold more weight.
Thanks for the video! 🤗 Could you tell me what size there is between one hole and the other? What size should I buy the hooks if I can't get the ones from IKEA? 1 1/8? 1 1/4? Thanks again
Thank you for the appreciation. I am not sure of the exact size of the hooks, but these are what you need to get - www.ikea.com/in/en/p/skadis-hook-white-30321617/ The name is skadis hook white.
🤚Was this video HELPFUL?
Let me know in a comment below.
Hello, does the white plastic rawl plug come in different sizes? Where can I get a packet that includes both the plug and the screw so they fit nicely? I would only need two, will I be able to buy just two from a hardware store?
So the white ikea screw will actually screw onto the screw that was put inside the wall?
@@razamughal9095 Yes, you can buy the screw and plug from any hardware store. Do not get too long screws as that's not really required.
What’s the size of the screw
This video was so helpful, I was baffled about how this board was installed before watching it! Thank you!
Glad I could help!
This video helped me confirm that the pegboard didn't come with the necessary installation supplies - which is very frustrating! Thank you though.
Yes, they should provide the basics. It's madness to go out to just get screws.
Why can't they just give it as a set
since IKEA is for the beginner who doesn't necessarily keep a stash of screws, I agree it should have included the 2 needed.
Had to watch this to find out why I couldn't screw it in. Because Ikea couldn't be bothered to include TWO screws or add into the instructions that you need them. I am so stressed trying to put this thing up. But thank you for the actual good guide.
Thanks for this easy to follow demonstration! Even though there’s only a few steps, it was still necessary for me to watch this. Just got my pegboard yesterday and now I can go install it with confidence! 😊
I'm glad that this video helped you :)
I see this is two years old, definitely needed it, thanks so much for sharing!
You're so welcome!
Thanks, thats quite useful. Ikea instructions are not as good as your demonstations. I did not like that IKEA did not include those basic 2 screws required to fix tha metal rod on the wall. You have done a good job of explaining it so clearly.
Glad this helped.
Yes, it is weird that they don't even give those 2 screws required to fix this board. Such items should have every tool to assemble it easily.
@@TheGlovesMan thanks. I have given feedback to IKEA through the chat option.
Thank you so much! Easily explained!
100% what I needed.. these boards have been sitting on my desk waiting fir installation for 2 weeks....
Glad that this was helpful. Please like and share the video.
Thank you for the Video. I thought my package was missing the wall anchors. I guess i need to head to home depot to get me drywall screws
Thank you!!! I definitely needed this to install one for my son for his art supplies. Thank you!
Very detailed guide!
Planning to install the board tomorrow, thank you so much for the video.
Glad it helped
Thank you! Just what i needed
You're welcome!
Love your video. I just purchased it, though they say its DIY and all, your video works as a stepping stone for me to take a call.
Glad it was helpful!
@@TheGlovesMan After seeing your video, I ordered 2 more boards. I am much more confident in installing them now.
Thanks for this!
My pleasure!
So very helpful ❤
thanks for this, I'm a woman and I need to be independent cos my bf is busy and I don't like how he put things on my wallcos sometimes they're slant lol.
You're welcome.
Gift him a level meter so that he does not put things slanted :)
Watched this, then EASILY installed myself. Thanks for the video!
Glad it helped! Can you please comment about the time taken for you to assemble this?
@@TheGlovesMan 10 minutes
I could not figure this out with just the Ikea directions, thank you thank you so very much for this video!
Happy to help!
Hi Sir! Nice video! May I ask what is the size of the drill bit that you used in the video? Thanks so much in advance!!
Hi, thanks for the appreciation.
It's a 6mm drill bit that I have used. Hope this helps.
@@TheGlovesMan It does! Thank you for your reply! :D
Most easiest installation video with just enough information. Thank you 😊
Glad it was helpful!
Which screws are these ? 6 or 8 ? no ?
I am not sure of the numbering thing. But these are screws that are 2 inch in length. If you intend to keep heavy stuff on this, then you should go for 4 inch screws.
what drill bit size did you use to drill on the wall?
I have used a 5mm drill bit to drill on the wall. The screw that I have used later on is 2inch long.
helpful thx mate
No problem 👍
I'm trying to fit this board thankyou for sharing this video. Can yiu tell me the 2 screws you used were flat head type? The instructions I have on mine said I should use dome head type screw, does it matter which type?
It does not matter. You can use either. The one's I used were dome shaped.
sorry where can i find the matallic bracket? cuz ive been searchin it for a few weeks already but havent found it yet
The metallic bracket comes with the peg board itself. If you haven't received it, please reach out to IKEA.
are the things that are used to tighten the screws included? or did you buy them?
I have purchased that separately. It's a IKEA toolkit box.
Thanks
What size mm screws and wall plugs do I need for it? I’m confused and quite lost as I’m worried what if I get the wrong size anchor wall plugs?
3-4 inch regular star shaped screws and plastic plugs of the same length should be good. A little oversized screws will cause no harm. Ikea provides this screws box that has almost all the necessary screws & anchors needed for regular ikea stuff.
Do purchase this - www.ikea.com/in/en/p/fixa-260-piece-screw-and-plug-set-20169248
Screw size for wall mounting sir?
2-3 inches screw size is fine.
Thank you very much for this video! Very clear and helpful instructions 🙂
Glad it was helpful!
I've never seen such terrible instructions. Man ikea is trash. Doesn't even come with everything you need
You mean my instructions or the instructions that come with the IKEA product?
How did you attach the pegboard to the bracket part ...Did not understand that part
Well, check the video from 5:16 onwards. You basically need to use the screws provided in the pack to tighten the pegboard on the bracket. The screws go in through the holes on the pegboard into the holes of the bracket.
But the first step would be to mount the bracket on the wall. Hope this helps.
Very helpful especially after viewing of this video was created 2 years ago!
So the bottom just kind of hang and doesn’t screw into the wall then?
Yes, that's right. It's just to balance the pegboard against the wall.
Thank you for the fast reply, kinda wish it came with 2 wall brackets but this will do thanks.
Hi. When you put the pegboard to the wall what are you screwing the screws into please?
Hi, the screws get screwed into the metallic frame that I had installed prior to mounting the peg board.
The top 2 screws go into that frame and the bottom 2 are just for support and keeping the pegboard at the same level as the top part.
Hope this helps.
What size are the screws you used please
Hi Muhammed, 2 or 3 inch screws are fine. It will hold the weight properly.
I don't remember what size is mentioned by IKEA on their user manual sheet.
Where did u put the pin at last
Can you let me know the exact timestamp about which you want info?
Thanks. The video helped!
Glad to hear that ☺️
THANK YOU SO MUCH! I could not figure out how to install this, the IKEA manual is garbage! You saved the day, I appreciate you, and will continue to use your videos!❤
Glad this was helpful. Yes, Ikea manual is hard to understand.
Helpful video. Could you tell what size screws you used for to hang the rail to the wall ? Thank you
Thanks. I used a 2inch screw to hang the rail on to the wall. The screw length depends on the type of surface that you are putting this on. But in general, a 2inch screw would do fine.
@@TheGlovesMan thank you
Thank you I was wondering about scree size also.
Perfectly explained 👌 and the music in the background 👏
Thank you so much for your sharing...it helps a lot 😊
You are most welcome buddy. Do subscribe for regular updates.
Thank you!! As I was watching I kept saying: aha! Very helpful - thank you
Glad it helped!
Is it necessary to mount this into a wall stud?
Yes Catherine, it is necessary.
sorry where can i find the matallic bracket? cuz ive been searchin it for a few weeks already but havent found it yet
It comes with the package itself. Did you not get it? Please reach out to IKEA support in that case.
thank you so much for the help brother ❤ but will it still work with 6cm screws or is that too small?
6 cm should be fine. Not an issue!
This was amazing, thanks!
Glad you liked it.
Very well shown
Glad it helped
New subscriber here! Hi, Thank you this video it's very helpful.
Thanks for subbing!
Really appreciate it men 🔥🔥🔥🔥
Any time
nice video! quick question, are screw anchors compulsory?
Well, if you have a glossy wall then you can use double sided tape as well. But if you mount it that way you'll have to ensure that you do not put too much weight on it.
@@TheGlovesMan thanks!
@@TheGlovesMan Oh yeah, when installing the wall mount, I realised that the hole for the screw that is going into the wall is quite long, which part of the hole do I put the screw through?
Thanks for the simple steps to install. The manual that comes with this board is pretty confusing or not useful to me. I have one doubt, its possible to install in horizontal way instead of vertical shown in this video?
Yes, you can install it horizontally as well.
2:27 What size screws are they?
They are 2 inch screws. Depending on the weight that you are adding to this pegboard, you can either go for 2 or 3 inch screws. 3 inch ones can hold more weight.
Thanks for this video. very helpful. One question, what kind of screws do i use ? Those ikea idiots didnt include any screws
I've got the screws set from Ikea itself. They sell it separately.
Out of that box, you can use the 2inch or 3 inch screws.
What size screw please
If you're going to put too much weight on it, go for 3 inch screws. Otherwise, 2 inch screws should be good.
Is the bottom of the pegboard supposed to touch the wall? Mine won’t stay on the wall
Yes, check the part where I place the spacers. The spacers are what are supposed to touch the wall.
Otherwise, it won't look properly aligned.
Hello, can we mount the peg board side ways?? Please confirm
I kind of didn't understand your question.
Yes. You can set it up in any direction you want
SUPER HELPFUL! THANK U!
You're welcome buddy.
Thanks so much!!!
You're welcome!
Read the instructions pls
Sorry, I didn't understand what you meant to say. Could you please re-phrase.
Very helpful! Thank you
You're welcome!
Thanks for the video! 🤗 Could you tell me what size there is between one hole and the other? What size should I buy the hooks if I can't get the ones from IKEA? 1 1/8? 1 1/4? Thanks again
Thank you for the appreciation.
I am not sure of the exact size of the hooks, but these are what you need to get - www.ikea.com/in/en/p/skadis-hook-white-30321617/
The name is skadis hook white.
Thank you thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
You're welcome 💙
Thankyou so much very clear and helpful 😊
Glad it was helpful!
Thank you for this! Your voice is so calming; helped keep me calm as I deal with IKEA instructions, lol! Mahalo!
haha... Glad this helped :)
Merci je comprenais rien au monde d’emploi vidéo très utile
Glad this was helpful
How much weight can this hold?? Planning to hang my hair dryer along with tooth brush and face wash.
Hi Suraj, it will take that weight easily. It's pretty solid built.
Thank you so much very helpful ❤
Glad it was helpful!
do you not need to find studs for this?
Sorry, what are studs?
Which drill bits size did you use?
2 Inch screws.
Great easy to follow instructions, ty
Thanks Mamma Bear for the appreciation
Thanks mate 🤝
No problem 👍
Merci beaucoup ça nous a beaucoup aidé !
Vous êtes les bienvenus!
Thank you so much :))
You're welcome!
Ugh, The scres didn't come with the board?! That sucks...
They didn't. They should actually provide the screws as well.
Not everyone would have a hardware kit with screws and stuff at home.
Thank you. 🍀
Glad this was helpful. The manual provided gets confusing at times.
THANK YOU!
No problem. Glad this video was helpful.
thanks!
Welcome!
Thx
Any time
The ikea instructions were more useful than this
Ohh okay.
Then why did you search for this video? For fun?