10:05 For the foglight switch wire, do you just mount the switch itself and once you connected everything it's gonna be switchable to on/off? PS I'm just going for a plug and play setup cause I'm not an expert in wiring/electronics like u said in the video
Depending on the year of STi you've got. For all the VA chassis WRX or STi's, the interior wires are all there. So, you will just need the fog light switch and the relay. The biggest difference is in the engine bay itself. Some models have the fog light wires ran to the engine bay relay box and others do not. I can say the 2020-2021 do not have the engine bay wires. You will need to run them yourself. Everything I have mentioned is if you want that OEM setup. There are outfits out there like Diode Dynamics that do have kits for a plug-n-play type setup. You just run their kit in your car.
@@wsucougarx i have a 2021 sti. Nice to know that I just need to buy the foglight switch and the wires like u have in the video. I kinda want OEM like yours but I'd rather have the plug and play and not worry abt the wirings anymore.
@@PascalLalancette-qr3qm I don’t, are you referring to 13:50 on the video? Also, I’m not sure how you have your fogs wired but it’s easy to plug the + to the - side. Simply unplug and plug back in after rotating your plug
@@PascalLalancette-qr3qm Unfortunately I didn't take any pics. One more thing, when you tested your fog lights, did you have your car started with headlight switch on?
Do you have a tutorial/guide on how to make the for light harness? I’ve been wanting to get fogs on my STI but don’t want to do a plug and play but rather more of an oem+ thing. Which side did you do ground and positive for the connector on your harness?
Sorry, I didn't do a tutorial video on the wiring harness. I thought about it but felt it may have been too involved. With the plug at the front bumper, a guy could run up to 4 wires to the fuse box. So depending on the project, a custom harness could be made. The parts needed would be the appropriate connectors at the front bumper, 18 gauge multi-stranded copper wire, wire sheath of some sort, grounding loop connector, and pins for the fuse box.
The Subaru emblem does not light up. I did think about adding one or a lit up STi badge. I may do this at a later date. I could tap right into the DRL power wire.
10:05 For the foglight switch wire, do you just mount the switch itself and once you connected everything it's gonna be switchable to on/off?
PS I'm just going for a plug and play setup cause I'm not an expert in wiring/electronics like u said in the video
Depending on the year of STi you've got. For all the VA chassis WRX or STi's, the interior wires are all there. So, you will just need the fog light switch and the relay. The biggest difference is in the engine bay itself. Some models have the fog light wires ran to the engine bay relay box and others do not. I can say the 2020-2021 do not have the engine bay wires. You will need to run them yourself. Everything I have mentioned is if you want that OEM setup. There are outfits out there like Diode Dynamics that do have kits for a plug-n-play type setup. You just run their kit in your car.
@@wsucougarx i have a 2021 sti. Nice to know that I just need to buy the foglight switch and the wires like u have in the video. I kinda want OEM like yours but I'd rather have the plug and play and not worry abt the wirings anymore.
Hi, do you have any photos of your wires in your fuse block to plug in the fog lights? I installed everything but the fog lights don't turn on?
@@PascalLalancette-qr3qm I don’t, are you referring to 13:50 on the video? Also, I’m not sure how you have your fogs wired but it’s easy to plug the + to the - side. Simply unplug and plug back in after rotating your plug
I ordered a kit like you with original parts but I just plug the fog lights
I would like to see photos of the wires in the fuse block. If you have any
@@PascalLalancette-qr3qm Unfortunately I didn't take any pics. One more thing, when you tested your fog lights, did you have your car started with headlight switch on?
Hello, I'm doing some research. You have to connect it to the blue wire that leads to the fog piton inside, everything works as original
Do you have a tutorial/guide on how to make the for light harness? I’ve been wanting to get fogs on my STI but don’t want to do a plug and play but rather more of an oem+ thing. Which side did you do ground and positive for the connector on your harness?
Sorry, I didn't do a tutorial video on the wiring harness. I thought about it but felt it may have been too involved. With the plug at the front bumper, a guy could run up to 4 wires to the fuse box. So depending on the project, a custom harness could be made. The parts needed would be the appropriate connectors at the front bumper, 18 gauge multi-stranded copper wire, wire sheath of some sort, grounding loop connector, and pins for the fuse box.
Does your front grill Subaru emblem light up? I noticed there was a wire sticking out from it.
The Subaru emblem does not light up. I did think about adding one or a lit up STi badge. I may do this at a later date. I could tap right into the DRL power wire.
Where’d you buy the kit from?
There was no kit per say. I sourced all the parts individually from JapanPart.com, Subaru dealerships, and various online Subaru parts places.