REBUILDING A 2018 CAMARO ZL1 TEARDOWN & MOVING METAL Part 2
Вставка
- Опубліковано 29 сер 2024
- Hey! Welcome back to the Channel, In todays video we continue to work on the Camaro ZL1. We get to work taking apart the inside, The airbags, seatbelts and the passenger seat. Then Ivan starts pulling metal with the frame machine. Thanks for Watching and Comment which is better #TeamHellcat or #TeamZL1
Follow us on Instagram --- httpswww.instagram.com_nikobrothers_
TikTok - NikoBrothers_Rebuild
httpswww.instagram.com_nikobrothers_
httpswww.facebook.comTheNikoBros
1003 Main St Wellford SC 29385 PO BOX 501
Merch Shop - nikobrothers.com
#_nikobrothers_
The factory designs the quarter panel so the seams won't be noticeable and easy to deal with. I'm sure you can make a partial quarter panel look good, but it seems like it would be much easier just to use the entire quarter panel and follow the factory seams.
kind of the first time i see one drill out rivets etc at decent speed. almost every carfixer i floow on you tube go full speed when drilling out that kinda stuff. if people would slow down they would realise how easy it is to drill stuff out. otherwise one is just burning the drill/drillbit. nice work. and the camaro has a lot cooler design.
Yes, spot weld drills go blunt quickly unless used at slow rpm 👍
I think you should replace the whole quarter panel. Then, when its off, you can cut it into smaller "Art Pieces", sign them, and sell them for $75. each. Undercut the competition!
100 lol
LMAO same thing that goonzquad is doing now 🤣
More like 1 to 5.00. That's nuts and B S. To ask 100. Like u know how
@@aryakhubcher Exactly!
Goonzquad are all about money … they have yet done a giveaway to the subscribers all the other channels give back to their supporters after all without us they don’t make money … they are greedy kids in my opinion 😂
Go with full panel… save time and materials. Better structure.
Great job so far! Full quarter panel will probably save you some time. As a Challenger owner I have to go with the Hellcat! But as a car enthusiast I love both cars! Looking forward to seeing it completed! #TeamHellcat
Thank you for sharing such an extraordinary work of rebuild. As professionals you must change the complete back panel.♥🤟👍
Thanks for the great work on your channel it also let people see how the work is done to repair cars very informative. thanks once again. Paul Adelaide South Australia
Camaro ,by far is the best. I own one . Use the full quarter panel in my opinion.
You guys are such an inspiration and make this look so easy. You guys have definitely given me the idea that one day I would love to tackle a rebuild. On something much cheaper then a Camaro zl1 haha.
Full. Panel. Cars well worth it. And and it will be done right
Please the whole quarter panel - Best way to do it Niko's 👍 - I prefer the CAMARO ZL1 rather than the Hellcat ❤👍
The red belts are part of the ZL1 package. Leave the car black...it is probably Carbon Flash Metallic. Hard to tell from the videos right now. Sticker on this was probably high $70K. I'd take the ZL1 over the Hellcat any day. Go Ivan!
red belts are an option on the ZL1. black is standard.
The HellCat came out great 👍 especially the paint job. But the Camaro should be the best when it's all finished completely.
Yes do a full quarter panel.
I would go a full quarter panel on this one. At least a full skin and replace all bent structures.
Love the shirt Ivan. God bless both of you and your family’s. Thanks for the great video’s! I appreciate you stick to fixing things and buying car videos. Too many others are exploiting there family’s and throwing there wealth in everyone’s face. Would love to see a video of you guys drag racing (in safe spot or track preferably) when Camaro and hell cat at are done.
Ivan my Christian brother I can’t tell you how much I appreciate you guys. Thanks for wearing that shirt. I am receiving a blessing that I being given back to you guys. His spirit is alive. Bless ya both what a great channel.
Saya sangat suka video kalian 👍👍🇲🇨🇲🇨🇲🇨
Ivan is a magical in his repairs. Michael is the interior man and everything else. I am so proud to watch both of you work and the fact that your brothers. Total respect to both of you 👍
I wouldn't dare give you an opinion. Your expertise, based on your videos, is top notch!
The LT1 could be gotten with OEM Red Seat Belts. Many bands now offer colored seat belts, Pole Star I think comes standard with Yellow. BMW i3 could be ordered with Bright Blue.
You make it look so easy, wow. Looking good so far replace the whole 1/4 panel in my opinion👍
You guys never cease to amaze. Ivan peels sheet metal like unwrapping a stick of wrigleys gum. Wish I had space for a project. Always enjoy your videos.
Since I'm a lifelong Camaro guy to me the ZL1 is more cooler and probably more fun to drive because of the manual and twisty road manners... Full quarter panel change out would be the way to go, almost sounds like you need a donor car or at least that section part of one. But I have faith in you, you guys do great work 👍 enjoying the video content. Keep up the great work!
Go for the full quarter panel......which one is better? That's a hard question since I like both of them...... can't wait to see the next video......
The gas cap vents permanently fumes so a dry cloth will not prevent flammable fuel fumes from escaping while you are cutting with an angle grinder. Buy yourself a compressed air nipper/scissor that will cut that panel off without sparks. Best $40 you’ll spend.
I think the whole quarter panel is called for this time. I think the Camaro has a slight edge in the 'coolness' category
I to think the camaro is a lot cooler.
Definitely better to replace whole quarter panel, makes it easier to align inner structure as the quarter panel retains it's shape when in one piece so less chance of misalignment. A donor quarter is way to go with this, you'll have all inner structure pieces so no excuses to leave any mangled metal. Should make a good car 👍uk.
The Camaro will look great when you guys are done. Niko Brothers Making Cars Great Again
I guess no one on youtube used spot weld cutters lol... I have one of those mini belt sanders and takes twice as long if not more vs a good rotobroach spot weld cutter.
I agree sanding welds takes longer. Faster and neater job using spot weld drill 👍 uk.
Full quarter panel!!!
Wonder twins. Do a full corner panel.
Let's not play Tetres with the quarter panel and replace the whole piece.
I’m a late model Mustang G.T. Owner but I love these, looks like a great project !
Great video, I hope you keep the same color, replace the full quarter panel, save time and money. Waiting for the next video. Take care thanks 😊
Full 1/4 more work but in the long run will be stronger.
Awesome job as always guys! 👍👍👍
Great job as always but I would go for whole quarter panel
Congrats Guy's on getting ur 18 Camaro ZL1. Wouldn't it be easier to take the headliner out the back window? Install the same.
Ivan you have to replace the whole quarter panel, why cut it up? It was Always a possibility that the inner panel would be damaged judging by the impact so don't be too disappointed. I would say that the seat belts are original if the seats are, they have some red in them. Finally don't change the colour. Thanks Brothers 👍.
I'd be happy to drive the crazy kitty.... Garfield....I can't wait for the burnout see which one is best burnout super kitty or camero
You guys are good don’t matter what it is both
Full quarter panel since this your first Camero
The whole quarter panel
Do the hole panel, you guys are awesome, love how it comes together when it’s done…
Good afternoon guys, I know it's going to look excellent. Steve from N.B Canada
In the late 50's and early 60's in the mid-west, seemed like the choice was always between being a Ford or Chevy guy. I turned out mostly to have a Chevy preference so cheering for the Camaro based on nothing but confirmation bias...lol Go Ivan!
Yessiree, best to drive got me licence on manual shift hill starts three point turns reverse parking sweating through whole procedure whew made me full endorsement motor licence 1976 during college days
Great looking car, I would do a collaboration with 23rd garage aka Yuri and vtuned to help with that quarter panel those dudes are pros with that especially with that corner of the car. Good luck I can't wait to see that camaro hit the streets.
just replace the whole thing its easier an niko brothers for president 2024
Awesome car guys can't wait to see it when it's done would like to see a nice exhaust maybe corsa 💯✌️
I love working on cars but y'all make this look so easy 🙂
Cool cars, both of them
I would definitely change the color and put racing stripes on it to make the body lines really show because black is just black doesn't show any of the curves to body lines really nothing so I keep that in mind you have to paint the door and the corner panel and blend it all in so you might have just paint the whole car definitely change the color up make the car really look good cuz I don't think the black looks as good but good job on the other build as in the hellcat and definitely the truck so keep up the good work I would take a pull and see who wants to change the color
do what ever,s easier and quicker. you the man....
Nice work brother be safe to use grinder machine
Hey man love your show a quality of work also you mentioned that you wouldn't mind racing them my money would be on the orange a black wild cat
I am a Mopar guy so it's the hellcat for me.but the Camaro is cool also and it's a six speed so...but the transmission is kinda like built to handle just enough from that super charger.should be a fun car to drive. I don't mind automatics I have driven enough stick and in traffic and such ehh nice job with the quarter panel Ivan 👌. don't think we are missing all the sarcastic remarks buddy🤣🤣. You don't want to be known as jack the hack Ivan you are to good for that...I was going to say there's a right way a wrong way and then Ivan's way😂😉😂👍👌✌️🇺🇲🇺🇸
whole qtr panel you want to see that in the trunk !
You guys GREAT build WOW. Stay safe Ivan!
You should do full quarter panel. Redeem yourselves from the Hellcat repair.
And no need for Bondo in the middle of the panel. 🙄
@7.11 you got your copart work boots on again hahahah. Nice build!
Good job 👍🏾 guys let’s get it done
Then find a mustang to work on
Then you will have the big three
Companies super cars
Put back together better then when they left the Assembly line😎👍🏾
Looking forward to seeing this build. 👍🏼
What ever you guy's think. then go for it. It's Up to you now. it's looking good guy's.
Full quarter panel would be the best
Love the t shirt! Praise the Lord!
I’m good with both. Just commenting for your algorithm 👍🏼👍🏼
Do what you think is the best 👍
WHOLE PANEL FOR SURE!
I believe that the seatbelts are factory red
Yep, along with the red stitching on the seats.
Wow Ivan that is a tough one because I like the Hellcat & the ZL1! The ZL1 is a little more subtle in the looks department but quite powerful as well! I have driven a Hellcat & ridden in a ZL1 and they are both impressive. Well it will interesting to see your opinion when you get to drive both of them! As always I am looking forward to the next video!
yoy guys are great excellent explainations!
you guys are so skilled, I learn so much watching you work,keep up the excellent content
GET ER DONE 😆😆😆😆😆😆😆😆 Great job getting it apart Ivan looking good👍
You guys know what you’re doing,love your video thanks again 👍🇬🇧👍😁😎🥷
if just the skin then replace it from seams..if the main structure replace the broken one..less money bein used and less time to fix..yet it will still durable
I would do deep quarter with b piller it will save you lot headaches I built wrecks since late 80s
Quarter panel replacement: Which is most cost effective.
Full panel is better but what do you think is best
Full fender is my vote
Hey more new tools for the NIKO Brothers good call on the belt sander grinder. Randy & yes you must have read my paint the doors complete message. Keep moving forward guys.
When will you post the final video of the Hellcat? 👍👍🎉🎉🎉🎉🎉🤘🏻🤘🏻Do full quarter-panel change. 👍👍
Like I wrote about the Hellcat, I would be upset if my vehicle was repaired by splicing. Change the entire quarter panel...
I'm a .Mopar fan so I have to go with the hell cat. .
Full replacement to keep the body filler down to a minimum.
Do full quarter panel
what's cooler? Easy, the one that is done...!
The red belts was a chosen option when the original buyer ordered the car.
They are both very nice vehicles!!
Yes they can be ordered red 150.00 option I have red in my 2022 2SS
Nice! You guys finally got one of those little belt grinders! 👍👍🤘🏻🤘🏻
full quarter
Cut it like the last one, but this time measure twice and cut once and not the otherway...lol
Not the professionnal way to do it.
Do a full quarter panel that would be the right way . Don't start shotty work now you are better than that .
To nice of a car to splice the quarter panel. Replace the complete unit.
Y’all should keep the hellcat and the zl1 for personal cars way too cool to let go of
I think this one needs the full quarter replaced. The Hellcat looked good with minimal amount of filler.
I would go for the Camaro anytime !
You guys should do an episode of sandblasting and painting your frame straightening machine and clamps. Camaro is cooler than a hellcat. Not saying the hellcat isn't great