If you film a family weekend, I'd probably still watch the video.. A family Guy can only do so much.. keep up the good work.. respect to you and the family Greg..
Buddy don’t sweat the haters, keep that family close. You got 26 liters of Cummins you build for us!!! I’ll wait a day or 2. Some of ya newbies to the channel should take that time to watch this man from the beginning so your not stacking the comment box full of questions you’d know. Sorry but someone had to say it, see everybody Saturday!! P.s. Greg I’m right off 33, you go by all the time ✌🏼😎 and you signed my📱😂
Greg A time in Australia 🇦🇺 Not a bad time bro still loving the channel !! SMASH THE LIKE BUTTON ! Time for 250k by the end of the year come on boys Greg needs to make this full time no more work more time for his little miss !!
Dude you just had a kid. It took me almost a year to year and half to get back to my routine. It takes time. Keep up the good work, your videos are always 🔥
You dont have to apologize about spending time with family. We all understand. When you get work done you get it done. Spend time with the wife and little one. They grow up faster than you think and you dont wanna miss out on these important years!! Do your thing Greg. We will all still be here no matter how much work you get done!!
Welcome to life with a family Greg. It changes your priorities a bit when there's kids involved. We're loving the videos you put up, so don't stress on it just keep doing what you do!
Honestly Greg, about the house thing/shop thing, i totally understand. I used to have my small engine shop in my garage but now its in my pole barn and i usually drag myself out there lol.
Dude anyone who didn't see the wrench turning slow down for the first few months has never had a kid. Keep the videos coming man, I like seeing it all.
Greg ! take your valve spring tool and have a hole drilled in it where the head bolt locator is and that way you can just slide it over the head stud ! instead of removing the stud .. bored of course big enough so it center off the o.d. of the head stud nut ..
I'm sure you thought of this but for the cost of leasing the shop, you could probably build a pretty decent structure behind your house. This way you don't miss as much "home" time and you could build it to fit your projects and provide for trailer storage. Something to ponder...
Mark is the man when it comes to paint. My mirrors have the fake chrome on them. Do i need to strip it off before colour matching or just go over? 2013 2500 Longhorn
Greg, you should just build some low profile ramps that support the weight of the truck and go over the inner fenders in the race trailer. Much easier in and out process. Just my .02$ save time and lug nuts in the long run👌
Awesome awesome video Greg A, yay 12 valve content lol. Can’t wait to see that thing fire up, and can’t wait to see some 05 rippage in tomorrow’s video lol. Everything on sallie the saddle bags looks awesome all tinted and color matched, but get those blacked out Cummins C badges on lol.
Hey greg, you should lower one side of your awnings a little bit when it rains so water doesn’t build up in the center and make the awning sag/stretch. Lets the water run off the corner instead of building up👍🏼
Love your video as always. Gregg have you ever thought about building a shop on your property. There's nothing better than working from your home specially when you have a wife and kids. But seriously nice steel building in your backyard especially where it floods all the time would be a great thing.
I also do the same I’ve seen what can happen to a ls2 when a keeper comes lose at WOT rod through the block and a few cracked sleeves yeah not a fun time
Stephen Cain I have luckly never had one come out knock on wood . But I have had a forged 383 stroker crank snap in half on a 8,000 rpm burnout . Let's just say it was $6,000 of ugly lol
gun-nut257 I have yet to see that happen but have definitely heard of it happening and yeah I ended up having to rip it apart when I went to auto tech school the guy did a cam valvesprings etc and well he didn’t really know what he was doing
We've had so much rain here in Crystal River Florida' the last 3 days/nights, to last us a month.. lol.. I don't mind the night rains so much, as long as the thunder and lighting isn't bad.. But the day time rain sucks sometimes..
Cory York lord we need it bad. I’m having a hard time managing my garden this year because I haven’t been able to collect rain water. Eastern NC has been so dry.
Say say, Greg a. I’m not sure if you’ve mentioned it before or if you’re willing to. I’ve watched this video already but I figured I’d come back to the most recent 1st gen video to ask. What radiator are you using in the first gen? And what intercooler? I move got a 91 d350 and am looking for those online and research but can’t find much. Thanks for your time and great videos! You’re the man Greg a, get back to me if possible👍🏼
Hey Greg, those 165# valve springs, i thought those are to heavy and would damage the Hamilton cam because the cams are made of a softer metal. Any truth to that? Thanks!
William Stanfield that’s why I built a Barndominium. Don’t even have to walk outside to get to my shop. 40x100 metal building plus 2,000sq/ft of porches for the price of a 2200-2400sq/ft house.
Greg Greg Greg am confused I thought the 05 was gonna become your every day / work truck / everyday street truck.....but you been racing it......but don’t get me wrong I love watching you bust people ass in the 05 best thing ever I think it’s funny they all rag on it bc it’s a heavy diesel truck then you pull up to the line and spank their ass every time
Chris Balser the 08 is the daily driver / work truck. He said the 05 would be a street truck just not as crazy as it once was. His weekend sports car basically.
If you film a family weekend, I'd probably still watch the video.. A family Guy can only do so much.. keep up the good work.. respect to you and the family Greg..
Mark is a genius with the paint
Hey Greg. When it comes to tinting lights, Mark is the man. He has some excellent ideas. 4th Gen tail lights look great! Thanks for sharing Mark.
Buddy don’t sweat the haters, keep that family close. You got 26 liters of Cummins you build for us!!! I’ll wait a day or 2. Some of ya newbies to the channel should take that time to watch this man from the beginning so your not stacking the comment box full of questions you’d know. Sorry but someone had to say it, see everybody Saturday!! P.s. Greg I’m right off 33, you go by all the time ✌🏼😎 and you signed my📱😂
Greg A time in Australia 🇦🇺
Not a bad time bro still loving the channel !!
SMASH THE LIKE BUTTON !
Time for 250k by the end of the year come on boys Greg needs to make this full time no more work more time for his little miss !!
Dude you just had a kid. It took me almost a year to year and half to get back to my routine. It takes time. Keep up the good work, your videos are always 🔥
You dont have to apologize about spending time with family. We all understand. When you get work done you get it done. Spend time with the wife and little one. They grow up faster than you think and you dont wanna miss out on these important years!! Do your thing Greg. We will all still be here no matter how much work you get done!!
Mark is the man!
Welcome to life with a family Greg. It changes your priorities a bit when there's kids involved. We're loving the videos you put up, so don't stress on it just keep doing what you do!
Like the mirrors and tail lights....ready to hear about engine set up for the drag truck Greg.Im sure its going to be a good one.👍👍
long time sub and it was definitely nice seeing you back in the garage wrenching and teaching us the ways of your expertise!
We love Mark
No problem on the shop deal Greg family first man, great vid
Most informative vid I’ve seen in a long time, not only with the valve springs but with the goal post too, thanks
Family comes first. If you want to be at home, then be at home....
I used some of that bulldog adhesion promoter the 2nd time I paint matched the bumpers on my wife’s jeep. It’s held up soooo much better this time.
House with a barn in the back yard is the way to go. It’s what I want to do
Always love all the videos and the family much love.
not sure how many other people got the ad but LONG LIVE ROBIN WILLIAMS!!!!!!! HE WILL NEVER DIE IN OUR MINDS AND HEARTS!!!!!
Honestly Greg, about the house thing/shop thing, i totally understand. I used to have my small engine shop in my garage but now its in my pole barn and i usually drag myself out there lol.
Hey that is all understandable about the family. Your doing a great job juggling it all I. Keep it up👍
Thank you for the paint info
Hell yea greg half of mifflinburg pa is coming to see you on the 21st see you at the event.🤟🏻
Great content Greg A, thank you sir
Dude anyone who didn't see the wrench turning slow down for the first few months has never had a kid. Keep the videos coming man, I like seeing it all.
Been waiting day and night to see another 1st gen video coming
Informative as always
Greg ! take your valve spring tool and have a hole drilled in it where the head bolt locator is and that way you can just slide it over the head stud ! instead of removing the stud .. bored of course big enough so it center off the o.d. of the head stud nut ..
Yes 1rst gen time!!!!
Always makes for a better lunch watching your videos 👍
Hey man, send the rain our way it hasn't rained in Williamsburg ks in two months
As a former landscape/lawn care company owner...nice stripes on the lawn Greg!
I agree he always does good lines;);)
I'm sure you thought of this but for the cost of leasing the shop, you could probably build a pretty decent structure behind your house. This way you don't miss as much "home" time and you could build it to fit your projects and provide for trailer storage. Something to ponder...
Mike Bolser he says he rents that place so unless he can buy it and put a shop up think that’s why he is looking for a different place
Mark is the man when it comes to paint. My mirrors have the fake chrome on them. Do i need to strip it off before colour matching or just go over? 2013 2500 Longhorn
You the man Greg A
Greg, you should just build some low profile ramps that support the weight of the truck and go over the inner fenders in the race trailer. Much easier in and out process. Just my .02$ save time and lug nuts in the long run👌
Just be careful tapping on the valve when your pistol is up so it don't hit pistol. Good job guys.
Awesome awesome video Greg A, yay 12 valve content lol. Can’t wait to see that thing fire up, and can’t wait to see some 05 rippage in tomorrow’s video lol. Everything on sallie the saddle bags looks awesome all tinted and color matched, but get those blacked out Cummins C badges on lol.
Hey greg, you should lower one side of your awnings a little bit when it rains so water doesn’t build up in the center and make the awning sag/stretch. Lets the water run off the corner instead of building up👍🏼
Love your video as always. Gregg have you ever thought about building a shop on your property. There's nothing better than working from your home specially when you have a wife and kids. But seriously nice steel building in your backyard especially where it floods all the time would be a great thing.
Not his property. He stated that rents that place.
They are looking for a new house with room for a shop.
I do it the samething I'm a body tech
Add on to your garage at home little bit wider and longer. Maybe a lift too. If your town allows you to build or add on.
Hell yeah brother 1st gen building
Tapping the top of the valves to seat the keepers is a common practice . It just makes sure they are seated from the vibration
gun-nut257 Do the same thing on all my motor jobs. Gives me peace of mind.
I also do the same I’ve seen what can happen to a ls2 when a keeper comes lose at WOT rod through the block and a few cracked sleeves yeah not a fun time
Ryan Brown me too for sure !!! Lol
Stephen Cain I have luckly never had one come out knock on wood . But I have had a forged 383 stroker crank snap in half on a 8,000 rpm burnout . Let's just say it was $6,000 of ugly lol
gun-nut257 I have yet to see that happen but have definitely heard of it happening and yeah I ended up having to rip it apart when I went to auto tech school the guy did a cam valvesprings etc and well he didn’t really know what he was doing
We've had so much rain here in Crystal River Florida' the last 3 days/nights, to last us a month.. lol.. I don't mind the night rains so much, as long as the thunder and lighting isn't bad.. But the day time rain sucks sometimes..
Field goal posts or bull horns??
We need some of that rain in Washington
Send some rain to Texas 110 degrees sometimes. And dry as can be. I’ve been fighting fires like crazy.
A new baby soaks up a ton of time. I understand
Why did we not know mark also has a first gen🙄.. C’MON GREG! We need to know these things😂
Trailer looks killer Greg. Makes it look beefy.
Mirrors came out awesome bud . What would he get to do that to my mirrors and taillights on my 2012 ? I'd box them up and ups them to him
Greg what kind of gear case do you have on the first gen and where did you get it
GBM needs his own channel!
Loving the progress on the 1st Gen, #DoPe 💪🏿🤙🏿 #NailediT🔩🔨
Sleeper 1st gen?? 1000hp?
Would be awesome to build behind your house. Best thing for a trailer is to have them inside. Nice a close to home then
Where did you get your stubby antenna? I’ve bought s few and can’t seem to have any luck with any of them
this was an awsome video
715th like! Hell yeah! Wooooo! This is sooo my life goal.... woooo
Build a shop at your house, great investment
I Torque things with a 1inch impact and a half inch hose at 135 psi and 60 gallon. Do you think it should be tight enough
Not the first one today lol love all your trucks 👌👌
We need some of that rain here in N.C.
Thomas Strickland Dont bring that monsoon on us lol
Cory York lord we need it bad. I’m having a hard time managing my garden this year because I haven’t been able to collect rain water. Eastern NC has been so dry.
Pa too . Dry as a bone !!!!
Great Channel Greg! I hope you answer my question, Will we see John again?
Say say, Greg a. I’m not sure if you’ve mentioned it before or if you’re willing to. I’ve watched this video already but I figured I’d come back to the most recent 1st gen video to ask. What radiator are you using in the first gen? And what intercooler? I move got a 91 d350 and am looking for those online and research but can’t find much. Thanks for your time and great videos! You’re the man Greg a, get back to me if possible👍🏼
Ah the Greg A weather report as a intro
Where has the ranger been?
Jared Sandefur he sold it a while back. The 08 is his daily driver now.
JR Townsley the diesel Polaris ranger
Jared Sandefur it's sitting in his home garage. He sat the broken mirror on the tailgate in the last video.
I guess I’m not the only one who thinks of the old ford when they bring up ranger
Winter is coming
Your life changes when you have kids buddy, time just isn’t always there as you’d like. Plus other added obligations makes projects hard to complete.
How do you share a video to you about a diesel motor
Hey Greg, those 165# valve springs, i thought those are to heavy and would damage the Hamilton cam because the cams are made of a softer metal. Any truth to that? Thanks!
Do you plan on doing a new intake horn on the second gen?
Please upgrade the intake elbow on the first gen... your just loosing horsepower to the restriction and turbulent flow.
Is that a GMC sign I see in the background
Damn rain better hold off sat
you should get a home tool box setup
So that’s what the shop looks like 😂 kidding 👍🏼
A shop at the house is the only way to go for a family man.
William Stanfield that’s why I built a Barndominium. Don’t even have to walk outside to get to my shop. 40x100 metal building plus 2,000sq/ft of porches for the price of a 2200-2400sq/ft house.
Looks good👌
What wheels and tires on the 05?
Did you America today?
Load all your tools and race truck into the trailer. Put the 05 and 12v in the home garage. Then ditch the shop
Would Mark mind if you shared his contact information? I'm sure others (like me) would like to ship mirrors to him for painting.
Is your dually deleted
Try to build a shop behind your house in your backyard.
ok i keep noticing that most everything has stock air horns. ???? why do you keep them?
I almost thought we weren’t going to see the 1st gen anymore just like johnny send it
Not sure if I missed something but... where has Mr. SendIt been??
Did I finally get a spare tire?
You*
Can I pay Mark to tint my tail lights and paint my mirrors??
How do u drive without getting a ticket with no mudflaps
hey no more bug's lol
Greg Greg Greg am confused I thought the 05 was gonna become your every day / work truck / everyday street truck.....but you been racing it......but don’t get me wrong I love watching you bust people ass in the 05 best thing ever I think it’s funny they all rag on it bc it’s a heavy diesel truck then you pull up to the line and spank their ass every time
Chris Balser the 08 is the daily driver / work truck. He said the 05 would be a street truck just not as crazy as it once was. His weekend sports car basically.
Got here early for once yes lol
Decent
Should have named the video Greg A deletes rain
Just* (just got a 91.....)
That first gen is my style fast low key and rusty 💦💦
Where's Johnny sendit or Jesse? I miss those guys.