You might want to contact the design engineers over at Teradek. They do not share their busines decisions with us. >Mark< Teradek: Tel: 855-837-2335 Website: www.teradek.com/ Email: info@teradek.com
I don't think you mentioned what happens to the bonded stream , where does that go? You can't just send a bonded streram to YT right, so how does it turn into a normal stream for youtube?
Multi-Destination Streaming: Send your live streams to Facebook, UA-cam, Vimeo, Wowza, and Custom RTMP(S) platforms simultaneously. With a subscription to Sharelink, Teradek’s cloud platform, you can keep a steady stream by splitting video bitrate across several internet connections. You can send your streams to multiple platforms at once. You can remotely manage your stream from anywhere in the world, and adjust your stream settings, destinations, and start/stop functionality using the Sharelink web interface. Common workflows using Wave: Camera > Wave > Sharelink > (UA-cam & Facebook) Camera > Wave > Bonded Sharelink > (UA-cam / Facebook) Switcher > Wave to Ethernet > Sharelink > (UA-cam / Facebook) Camera > Wave > RTMP (UA-cam or Facebook) Camera > Wave > RTMP (UA-cam / Facebook) Switcher > Wave to Ethernet > RTMP (UA-cam / Facebook) Teradek WAVE Quick-Start guide: bit.ly/3pE5pQV >Mark
Thank you for your question. We invite you to reach out to us via Live Chat on our website until 8PM ET so we can go over your options in greater detail.
TERADEK SPARK 4k Does anyone has the same issue? It says out of range even its just meters away to each other. sometimes it says no video but good link on the RX, but on the TX it indicates it says "no link" I tried to restart the RX. It will work fine for 1min. RX receiving video with good link, TX indicates no link but same frequency to RX. Also I did swap the RX and kept the TX. All were good I did also Firmware update. Nothings changed. My location is SEA.
I'm sorry to hear that your Teradek Spark 4K Transmitter/Receiver Set (BH #TE101855) has been having some connection issues. It sounds like you will need some one on one trouble shooting support. If you would like to have a one on one video chat with our product specialists, please sign up for a Tech Corner session. You can pull up the Tech Corner sign up page by pasting the following link into your web browser. bhpho.to/3XFjXQM
Correct Dalton. There is no DC power input port. The new Teradek Wave is powered using the integrated dual L-series battery plates or included USB Type-C power input and power adapter (included). >Mark
Wot, no SDI input or SRT transmission on the TD Wave?
You might want to contact the design engineers over at Teradek. They do not share their busines decisions with us. >Mark<
Teradek:
Tel: 855-837-2335
Website: www.teradek.com/
Email: info@teradek.com
Which usb-modems are compatible with the WAVE ?
Most currently available cellular 4G/5G USB modems should work fine. bhpho.to/3INUUTL >Mark
Why there is a delay display on monitor
I don't think you mentioned what happens to the bonded stream , where does that go? You can't just send a bonded streram to YT right, so how does it turn into a normal stream for youtube?
Multi-Destination Streaming:
Send your live streams to Facebook, UA-cam, Vimeo, Wowza, and Custom RTMP(S) platforms simultaneously. With a subscription to Sharelink, Teradek’s cloud platform, you can keep a steady stream by splitting video bitrate across several internet connections. You can send your streams to multiple platforms at once. You can remotely manage your stream from anywhere in the world, and adjust your stream settings, destinations, and start/stop functionality using the Sharelink web interface.
Common workflows using Wave:
Camera > Wave > Sharelink > (UA-cam & Facebook)
Camera > Wave > Bonded Sharelink > (UA-cam / Facebook)
Switcher > Wave to Ethernet > Sharelink > (UA-cam / Facebook)
Camera > Wave > RTMP (UA-cam or Facebook)
Camera > Wave > RTMP (UA-cam / Facebook)
Switcher > Wave to Ethernet > RTMP (UA-cam / Facebook)
Teradek WAVE Quick-Start guide: bit.ly/3pE5pQV >Mark
Well. How should I downscale my 4K source to 1080p?!
Thank you for your question. We invite you to reach out to us via Live Chat on our website until 8PM ET so we can go over your options in greater detail.
How could I do a wireless multi cam livestream using this system?
Connect the Teradek Wave to the output of your switcher. >Mark
Does teradek spark support 3d luts? :)
Teradek supports 3D LUTs in their BOLT and COLR products. There is no 3D LUT support for the WAVE. >Mark
TERADEK SPARK 4k
Does anyone has the same issue?
It says out of range even its just meters away to each other. sometimes it says no video but good link on the RX, but on the
TX it indicates it says "no link"
I tried to restart the RX. It will work fine for 1min. RX receiving video with good link, TX indicates no link but same frequency to RX.
Also I did swap the RX and kept the TX. All were good
I did also Firmware update. Nothings changed.
My location is SEA.
I'm sorry to hear that your Teradek Spark 4K Transmitter/Receiver Set (BH #TE101855) has been having some connection issues. It sounds like you will need some one on one trouble shooting support. If you would like to have a one on one video chat with our product specialists, please sign up for a Tech Corner session. You can pull up the Tech Corner sign up page by pasting the following link into your web browser. bhpho.to/3XFjXQM
The Wave has no DC input port?!
Correct Dalton. There is no DC power input port. The new Teradek Wave is powered using the integrated dual L-series battery plates or included USB Type-C power input and power adapter (included). >Mark
@@BandH Ah, I didn't see anything about an included power adapter. Thank you for clarifying.
Goodbye yolobox pro….
why?
Nope i did not migrate to teradek but i purchase the yolobox pro instead mainly because of its continues update and features