Jake brake issues? Check this first.

Поділитися
Вставка
  • Опубліковано 9 гру 2024

КОМЕНТАРІ • 52

  • @giovannibaselice4683
    @giovannibaselice4683 2 роки тому +2

    Driving Renault trucks with Volvo D10 engine, in the morning pulling the engine brake lever the dash says 'engine brake inhibit - engine oil cold'. Nice video guys !

  • @wallycleaver1320
    @wallycleaver1320 4 роки тому +4

    Good work men I like the way you guys operate.

    • @TruckYoo
      @TruckYoo  4 роки тому +1

      Much appreciated

  • @mechmobile2019
    @mechmobile2019 4 місяці тому

    It could also be the case that If someone replacing the oil PAN forgot to disconnect the sensors and drop the PAN, they tore it off at that point.

  • @sameryasin448
    @sameryasin448 3 роки тому +1

    Engine compression brake actuator. Can you please show where it’s located

  • @mimiulemsee5617
    @mimiulemsee5617 3 роки тому +2

    Where y'all located? My ECU died and had it replaced. Now my jakes won't work but my cruise control works. I've had a different mechanic reprogram the ECU, replace the brake control and now the turbo. What could be the problem? It's killing me I've spent almost 10k and I'm still stuck

  • @keyandaneshmand9915
    @keyandaneshmand9915 3 роки тому +3

    You guys are perfect

  • @alexjacquez8918
    @alexjacquez8918 3 роки тому +3

    If you think that nobody would leave something like that without fixing it, think again, this days, most of mechanics are only after everyone's money.

  • @edwinmichel2666
    @edwinmichel2666 4 роки тому +2

    Hey guys I Have a 1999 Detroit 12.7 60series my Jake brake only works when I have extremely light pressure on the gas pedal.

    • @thatdieseltech4666
      @thatdieseltech4666 4 роки тому

      Start by inspecting the wiring to that throttle position sensor. Spread pins at connector,corrosion,chafed wiring.

    • @juandejesus2490
      @juandejesus2490 3 роки тому

      @@thatdieseltech4666 do you know where the jake brake control relay is?

  • @adalbertotorres8651
    @adalbertotorres8651 3 місяці тому

    Where is your shop at

  • @janiomota5384
    @janiomota5384 Місяць тому

    Nice tip. Thanks

  • @KhmerguitaristChan
    @KhmerguitaristChan 7 місяців тому

    My Volvo brake light come on and off send the signal to brake in trailer... any ideas

  • @AKRGO
    @AKRGO Рік тому

    How about if jack brake works, but very weak

  • @kamal171
    @kamal171 4 роки тому +4

    I have a 2016 D13 cruise control an engine brake not working

    • @patryk2497
      @patryk2497 4 роки тому +2

      Try lifting up the clutch pedal with your foot then try putting on cruise control or Jake

    • @thatdieseltech4666
      @thatdieseltech4666 4 роки тому +4

      Possibly clutch pedal micro switch like we mentioned in the video.
      Like Patryk24 mentioned try lifting the pedal up.

    • @patryk2497
      @patryk2497 4 роки тому +2

      @@thatdieseltech4666 thanks, didn't know what it was exactly called!

    • @thatdieseltech4666
      @thatdieseltech4666 4 роки тому +4

      Patryk 24 always here to help we never stop learning.

    • @kamal171
      @kamal171 4 роки тому +1

      Thanks all over you

  • @razaghumman2412
    @razaghumman2412 4 роки тому +3

    Thanku man good stuff make more videos like this one 🙏👍

  • @tommyhall350
    @tommyhall350 4 роки тому +2

    Love all the Volvo trucks good work

  • @truckandtea
    @truckandtea 2 роки тому

    I have freighter cascadia 2017.
    No engine brake,
    But when I set cruise control green engine light turn on only when set the cruise. So on the mounting I gotta use the cruise to be able to use it!
    Any idea any one ?
    Thanks

  • @brunothebruiser2955
    @brunothebruiser2955 2 роки тому

    I know this is a year ago but just curious what does it mean when your Jake brake only works in the parking lot???

  • @happycustomer5934
    @happycustomer5934 3 роки тому +1

    Where is your shop located?

  • @bernardmwariri828
    @bernardmwariri828 3 роки тому

    My 2012 Vnl 670 d13 is not working sometimes. When I start the truck in the morning, it’s gonna take like 30 miles drive for it to activate. Please help

  • @wilmerandino2366
    @wilmerandino2366 2 роки тому

    Where is your repair shop located?

  • @beezy3644
    @beezy3644 2 роки тому

    Would this also work on a 2013 Mack? My oil temp Guage doesn't work. And my engine break has been non existent.

  • @johnysilver1853
    @johnysilver1853 3 роки тому

    My VNL 2011 10speed manual lost engine brake overnight. On dashboard it shows good engine temperature and oil pressure. What can I check?

  • @Tampa-o8k
    @Tampa-o8k 2 роки тому

    Hey man my truck is a 2012. It was running fine with check engine on. I went on vacation for a week and when I try to start it the lights would come on, but it won’t crank at all. The only message i get it Maintenance required vehicle Ecu. And j1939 Communication error with Engine ECU. Please help me out with this if you have any idea what could it be

  • @vell0510
    @vell0510 3 роки тому +1

    Where are you guy located? I’m having the same problem but my cruise control is out too. My oil pressure gauge is not working as well. 2006 VED12

    • @MultiHondaa
      @MultiHondaa 3 роки тому

      To activate my cruise while at a stand still, I push and hold the brake for 4 seconds. Other than that, the cruise won't work by me just turning it on. Freaking weird.

  • @charlieboy501
    @charlieboy501 3 роки тому

    Can someone explain to me do each cylinders have there own jakes ....i dont have good jakes on my volvo engine and i was wandering can you install more jakes onto a engine

  • @ballincobalt4184
    @ballincobalt4184 3 роки тому

    Do you know what would cause a d13 to spit when on the jakes?

  • @barnala1995
    @barnala1995 2 роки тому

    2013 Volvo my gps & Jake brakes not working + no power climbing I have 9 speed transmission where you guys are located ?

  • @КаринаГенацвалли
    @КаринаГенацвалли 2 роки тому

    В каком вы штате? Как название шапа?
    У меня проблема с тягой и engine break, тоже вольво

  • @strangecountry6733
    @strangecountry6733 3 роки тому

    I have 2005 volvo 780 d12 just change the engine brakes solenoid a month ago and start working fine now is only 1st stage is working the 2nd engine brakes stage not working what do think thanks

    • @yul702
      @yul702 10 місяців тому

      Having this issue right now, what was it ?

  • @azsk69
    @azsk69 4 роки тому

    Hello, my jake and cruise controll isn't working but I missed in the video what you were referring to what could be the cause. Thank you

    • @coreyholloway2579
      @coreyholloway2579 3 роки тому +2

      Sounds to me like he said the micro switch on the clutch pedal is not working. I am having the same issue. My cruise control isn’t working and neither are my jakes

  • @terrancetilghman863
    @terrancetilghman863 3 місяці тому

    Good Men

  • @MrDJSTRATEGY
    @MrDJSTRATEGY 4 роки тому

    Well dam !!! Same issue here. Thank u

    • @TruckYoo
      @TruckYoo  4 роки тому

      You're welcome Dj!

  • @PaulMcLove
    @PaulMcLove 3 роки тому

    👍😉😀

  • @mattrichard8759
    @mattrichard8759 3 місяці тому

    What a goof

  • @Bossmantrk
    @Bossmantrk 3 роки тому

    500$ job

  • @dmitriyshunyayev7571
    @dmitriyshunyayev7571 3 роки тому

    Volvo don't have Jake brakes they have exhaust brake

  • @cortezbarron9684
    @cortezbarron9684 3 роки тому

    Can see sh$t your doing

  • @gailmorra
    @gailmorra 3 роки тому +1

    Omg! Learn how to review your videos before posting