تبارك الله عليك و دمت دائما متألق....خدمتك كاتبين أن المستحيل غير سمية...كيما كانأكد عليك دائما خدمتك نقية، حبذا لو تضيف شوية دالمزيكا و نسمعو الشرح ديالك أولا تعطينا نبذة على السيارات لي ممكن أنهم يتبريكولاو...على العموم واصل و أنا معاك ✌️
Excellent work!!! I have a question, if I may ask; After you put it back together and installed it in the car, do you calibrate the needles? Will it be an inaccurate speed shown on the cluster? Thank you for sharing this video. I love it!! Great work. Thanks in advance!!
Thanks for the comment. In fact when you put it back together and installed it in the car you have to calibrate the needles..but it's so easy. So you have to take a picture before you open it. I have a freind from Switzerland who did the same thing for his peugeot 208 by consulting the first video I shared( ua-cam.com/video/ealc9Z1As1c/v-deo.html) knowing that is the first time he has done it. I was very happy to see the result wich he shared with me on whatsapp. It was impressive 👍
Thanks a lot for the video! I have a question about those three little gauges in the back (Nm, L/Km and V) - how do you take them apart? I have a different type of lighting in my tiburon (not smd diodes) so I changed the lights from the back but they still light up light orange because of the colour on the back of the gauges...Can I remove the needles like you did with your gauge and sand off the colour or not? The needles are on quite firmly and I'm afraid that if I pull them hard I will break them...Please help me if you can جزاك الله خيرا
hello, for the temperature needle you must start the car until the engine reaches its nominal temperature then you put the needle.. for the fuel level needle if you have already taken a picture of the needles before disassembling the counter you put the needle back where it was otherwise you fill up and you put the needle.
@@thinkmakechannel7738 I could not calibrate the fuel needle I have the pond full I leave the needle at zero and when I contact the needle does not mark full and then does not move from the place and the needle is not tight
@Import-Chile Racing and Performance hello you put the ignition without putting the needle (without starting the engine) then you remove it then you put it back again .. at this moment you put the needle in the full position.
@@thinkmakechannel7738 I understand to give contact to the engine (without starting) and without the needle put on the indicator, then I close contact and again I give contact and that is when I put the needle in this case indicating that the fuel tank is full
تبارك خدمة متقونة المزيد من التألق والابداع إن شاء الله ✌🏻
تبارك الله عليك و دمت دائما متألق....خدمتك كاتبين أن المستحيل غير سمية...كيما كانأكد عليك دائما خدمتك نقية، حبذا لو تضيف شوية دالمزيكا و نسمعو الشرح ديالك أولا تعطينا نبذة على السيارات لي ممكن أنهم يتبريكولاو...على العموم واصل و أنا معاك ✌️
Gracias muy buen tutoria, una pregunta es difícil extraer el cuadro de ese modelo en concreto, un saludo 👋
ua-cam.com/video/aRPDRdvzF2M/v-deo.html
Hello, can your list all the led sizes?
Tjrs top 👍
Excellent work!!!
I have a question, if I may ask; After you put it back together and installed it in the car, do you calibrate the needles? Will it be an inaccurate speed shown on the cluster?
Thank you for sharing this video. I love it!! Great work. Thanks in advance!!
Thanks for the comment.
In fact when you put it back together and installed it in the car you have to calibrate the needles..but it's so easy.
So you have to take a picture before you open it.
I have a freind from Switzerland who did the same thing for his peugeot 208 by consulting the first video I shared( ua-cam.com/video/ealc9Z1As1c/v-deo.html) knowing that is the first time he has done it.
I was very happy to see the result wich he shared with me on whatsapp.
It was impressive 👍
Hello, do you know what voltage the diodes are? I found new 2835 ones in 3 and 6 volts.
Hello, they are 3 volts
👍 👍 👍 👍 👍
What head unit are you using it looks amazing would love to install one in my car
i will send you the details on whatsapp
Thanks a lot for the video! I have a question about those three little gauges in the back (Nm, L/Km and V) - how do you take them apart? I have a different type of lighting in my tiburon (not smd diodes) so I changed the lights from the back but they still light up light orange because of the colour on the back of the gauges...Can I remove the needles like you did with your gauge and sand off the colour or not? The needles are on quite firmly and I'm afraid that if I pull them hard I will break them...Please help me if you can
جزاك الله خيرا
hello
yes you can..it is the same...here is my number(+212662691435) you can contact me on whatsapp at any time.
Good luck brother 👍
@@thinkmakechannel7738 Thank you bro, I suceeded! :D
Hello, how did you calibrate the needles of the fuel and temperature?
hello, for the temperature needle you must start the car until the engine reaches its nominal temperature then you put the needle.. for the fuel level needle if you have already taken a picture of the needles before disassembling the counter you put the needle back where it was otherwise you fill up and you put the needle.
@@thinkmakechannel7738 I could not calibrate the fuel needle I have the pond full I leave the needle at zero and when I contact the needle does not mark full and then does not move from the place and the needle is not tight
@Import-Chile Racing and Performance hello
you put the ignition without putting the needle (without starting the engine) then you remove it then you put it back again .. at this moment you put the needle in the full position.
@@thinkmakechannel7738 I understand to give contact to the engine (without starting) and without the needle put on the indicator, then I close contact and again I give contact and that is when I put the needle in this case indicating that the fuel tank is full
@@thinkmakechannel7738 You will have a video to see exactly the steps you take to calibrate the fuel needle
Hi, what is the brightness of those leds in mcd?
Hi, it's about 500 lumens per metre
@@thinkmakechannel7738 do you have URL to datasheet or product website?
For me I recovered them from a old led strip but you can search for SMD 5050 led or smd 3528 led (but 5050 is better)
Hi, one more question. Do you remember, how many diodes of each type did you need? I'm gonna make an order so i hope that I will buy enough. :D Thanks
Hi,you can buy 20 diodes (17 is enough but is better to order more) and 3 for the Lcd screen if you are gonna make it with different color
What size leds are you using?
I use SMD 2835 but for the display i use SMD 5050/5060 RGB
@@thinkmakechannel7738 awesome thanks bro. I'm going to do this this weekend.
@@jorgealvarado7933 good luck bro👍
@@thinkmakechannel7738 would you happen to know what size bulb is needed for the check engine light. Mine went out
ممكن اعرف نوع الليد أو مكانه فيه أو بتجيبه منين
في هذا الفيديو قمت بالحصول على الليدات من شريط ليدات يباع للمتر يستعمل للزينة وإضاءة واجهة المحلات..
ممكن لو تكرمت تنزل فيديو في شرح لشريط الليد من فضلك
@@حاتممحمد-ص4ص ان شاء الله..أو ممكن تتواصل معي عبر الواتساب لمزيد من التوضيح والشرح:+212662691435