Man all the guys that were bitching months ago saying Greg don’t post anymore now he’s giving daily content and the channel isn’t growing. This guy literally has the knowledge for just about everything.
my advice for the back pressure sensor is to get one direct from Cummins, stealership charges way too much and the Fart Store ones are absolute garbage
That’s so funny I’m running into the problem right now I popped a upper hose used to have a bracket holding it but I switched to a third GEN manifold on my 2012 I was getting ready to search it up then I ran into this video once again Always run into your videos when I need something it’s so funny how that works👍👍
you should do a video going over every truck and how much money you have invested in them to get them where you want them to be. the money side of every build interests me.
Other then firepunk you def do the best cleanest world in the busyness and fir sure there’s no one ☝️ out there that’s got more toys then Greg A your one of a kind 🌲 fir sure 😆
J Bandit I have the by pass already. Was talking about the part from full send. Also he always says he’ll put specific links in the description and never does haha!
I just installed the Fleece idler pulley and found the factory dust washer wouldn't fit so the orange rubber seal is exposed. It looks like you had the same issue and just used a washer under the bolt head. Curious if you did this by choice or had the same issue?
My question is are you going to start doing some emissions on performance stuff. Because let's face it the day of the deleted diesels is coming to the end. Can you say ( clean air act ). Just curious.
You definitely shouldn’t heat the engine up without coolant. The wall of the cylinder would get very hot without water surrounding it. Plus your temp sensor won’t do much if there isn’t coolant in the engine to heat up
That wire or capillary tube you attached to Whatever that is you installed in the hole you tapped in the exhaust manifold needs a loop or coil in it or it is going to fatigue and break off.
Looks kick 🦵 ass you know that but it might have looked a lil better if it was black like everything else on evilfab they had one with evil fab in grey that was clean as shit
New to ur channel recently .. but jus wondering are you a licensed diesel mechanic An work for yourself or ? Or are you self taught no license ? Wish I had your knowledge lol .. you have a lot of trucks and projects on the go sometimes guys get lost An they don’t all get completed lol
Hi, my name is Greg A. I will spend thousands of dollars on mods at the drop of the hat, but when it comes to $30 sensors, that's where I draw the line and need free parts from my viewers. 🙄🙄
Man all the guys that were bitching months ago saying Greg don’t post anymore now he’s giving daily content and the channel isn’t growing. This guy literally has the knowledge for just about everything.
i love that you pay attention to every little detail
I see a street race truck build here soon
my advice for the back pressure sensor is to get one direct from Cummins, stealership charges way too much and the Fart Store ones are absolute garbage
I was hoping you would paint that alternator 👍🏻
That’s so funny I’m running into the problem right now I popped a upper hose used to have a bracket holding it but I switched to a third GEN manifold on my 2012 I was getting ready to search it up then I ran into this video once again Always run into your videos when I need something it’s so funny how that works👍👍
“Would you just look at it” Ed bassmaster 😂😂
pro tip: watch series at kaldrostream. Me and my gf have been using them for watching a lot of movies lately.
@Rocco Ali Yea, I have been watching on Flixzone} for years myself =)
@Rocco Ali definitely, been using Flixzone} for since november myself :)
you should do a video going over every truck and how much money you have invested in them to get them where you want them to be. the money side of every build interests me.
Would you ever do a battery relocation to the bed or under the bed on the frame rails to clean up the engine bay and have more room?
So many trucks, so little time
Before I even watch a video I hit the like 👍
Other then firepunk you def do the best cleanest world in the busyness and fir sure there’s no one ☝️ out there that’s got more toys then Greg A your one of a kind 🌲 fir sure 😆
D 200 looking good it's awesome
Awesome awesome video Greg A, the 08 is absolutely OG lol, can’t wait to here the 08 fire up I want to hear it so bad lol.
The threads are their own sleeve as well greg
They need to make different colored Teflon tape so it doesn't stick out like a sore thumb on fittings when you're doing a custom build.
That exhaust manifold looks very restrictive.. I would get a better flowing one? I don’t know a lot about diesel but they also need to breathe!
I have that sensor if you want it
You need to throw a mechman alternator in there.
Does anyone remember where he said he got his valve cover for the tow pig??
Ryan Kovaly d&j
Been looking for a truck like this one to get rid of my 2012
Hi what brand is the harmonic balancer thks
Is that a T-4 Steed Speed manifold or bigger ?
So where’s the link for that coolant hose thing? You never put thing in the description below lol
That Red 6.7 Guy full send diesel makes the heater hose, fleece makes the coolant bypass from behind the block to the thermostat
J Bandit I have the by pass already. Was talking about the part from full send. Also he always says he’ll put specific links in the description and never does haha!
I just installed the Fleece idler pulley and found the factory dust washer wouldn't fit so the orange rubber seal is exposed. It looks like you had the same issue and just used a washer under the bolt head. Curious if you did this by choice or had the same issue?
My question is are you going to start doing some emissions on performance stuff. Because let's face it the day of the deleted diesels is coming to the end. Can you say ( clean air act ). Just curious.
You definitely shouldn’t heat the engine up without coolant. The wall of the cylinder would get very hot without water surrounding it. Plus your temp sensor won’t do much if there isn’t coolant in the engine to heat up
People in the drag racing world do it all the time.
happydoggs yeah people running methanol
Compounds coming up 🧐
Did you pay sinister for that blue?!🤣. What size charger?
Hey greg you still talk to the ol boys from the old house, johny send it and no boost?
Hey buddy hope you got the email I sent you for good friend mark.
Will the full send kit fit on an 08 even though the website says 07?
How do you like the ridge grapplers? I’ve been contemplating getting a set. Didn’t know how loud they are.
Randy Gates there pretty quite I’ve got them on my truck they wear pretty good too I like them
Agree with Bryce. Run them on my 18 3500. Not quite as quiet as the terra grapplers, but more aggressive sidewall.
Hey man how big is your current shop
Im a cummins red kinda guy.. but Daaaaaaaang i like the blue! 👌
Can't wait for the d 200
Did you keep the trans heat exchanger?
Got a question it might be dum but iam new to diesel stuff but wouldn't u get a better egg ready form down pipe then manifold just asking
Nope, you need to see what the engine is doing. It tells you what's going on in your cylinders.
Thanks had seen one on video on a down pipe and was wondering what was better
Not a problem dude.
That wire or capillary tube you attached to Whatever that is you installed in the hole you tapped in the exhaust manifold needs a loop or coil in it or it is going to fatigue and break off.
First vid since I deleted and tuned. Now mine sounds like the intro🤣
Dude I can't wait intill the truck gets down
Shouldn't you take the belt off if your going to fire up with no coolant so your not running water pump dry? Just food for thought
Greg, you look different in blue lol 🤷🏻♂️ too clean
You interested in selling any of the old powder coated parts?
That blue 😍
Looks good man
Looks kick 🦵 ass you know that but it might have looked a lil better if it was black like everything else on evilfab they had one with evil fab in grey that was clean as shit
New to ur channel recently .. but jus wondering are you a licensed diesel mechanic An work for yourself or ? Or are you self taught no license ? Wish I had your knowledge lol .. you have a lot of trucks and projects on the go sometimes guys get lost An they don’t all get completed lol
Good friend Cameron here
What’s up with that fleece bypass buddy? :D sign it and send it to me :)
Does anyone know what injectors he put in this truck?
Kyle Smith He’s got a video of a few vids back.
What was that? That wasn't a Greg A weather report. 😂😂😂
Moar d200
Nice!!
Gunna get sued by sinister for the shirt!!!!!
Jason Truman 🤣🤣🤣
Why have they moved comments section again 😡😡
Greg needs a haircut
must be nice to have 15 grand to throw at the engine bay
Trevor Wilson Hard work has its rewards.
Luke Miller aye bud
Second
Hi, my name is Greg A. I will spend thousands of dollars on mods at the drop of the hat, but when it comes to $30 sensors, that's where I draw the line and need free parts from my viewers. 🙄🙄
lmao was thinking the same thing