The wire next to the black on all switches goes to circuit for your dash. In other words this will light up the words on switch when the car is on. The wire next to green on switch always goes to lights this will power up lights. This method will allow both icon and words on when in use.
These switches use 2 bulbs. Is there a way to have the font “light bar” be lit always (with the dash lights) and then have the light bar image only illuminate when the light bar is actually turned on? I feel this would be as oem as possible but may be difficult to wire it this way..
Bu yorum diğer bütün videolardan daha fazla işe yarar ancak benim bir sorunum var . Sorun şu ki kontak kapalıyken ışıkları yakabiliyor olmam 😅 nerde yanlış yaptım bilmiyorum
I appreciate your honesty. Therefore I subscribed. Because you are honest saying you don't know what you are doing. I did this stuff over 30 years ago with my 77 CJ5. Back in the day it was so much easier because it was bare bones and not all this electronic crap! I just got my 21 TRD Offroad, and have no clue with all the wire. I plan to do it a little different going with the trigger contro. Have to be careful as to not void out warranty items. Thanks for the great content
Thanks for the support!! I’ve had my truck for over a year and still don’t know what I’m doing when it comes to the electrical stuff 🤣 congrats on the new truck!
If u connect the free red wire only the Lightbar (word) will lit up. When hit the switch to engage the light bar both Lightbar (word) & lightbar image (on top) will lit up. I like lt lit when its dark. Easy to see.
Thanks for adding this comment! I'm try to install 4-pods this weekend and definitely want the switch lights on.... Where would I need to connect the free red wire to make this happen?
@@ebx2323 You can connect it to your ignition, you'll need add a fuse kit. He explains it in this video. Around 2:00 mark ua-cam.com/video/O3VBAGfCdNw/v-deo.html
Wait there’s a way to do this!!?!? I’m looking to do it this way! Have the font lit always and then push the button to activate the light bar and have the lightbar image light up.
Hey man! Does this have power all the time? I just installed a similar one and it has power all the time. Not sure if that’s bad for my battery but can you help explain how that worlds cuz it’s connected directly to the battery
Hey dude, if it is backlight with the blue light all the time then you have the wiring wrong. Did you match up the wiring like I did with mine?? Or were your wires different than mine?
would i jsut be able to connect the 3 wires on the switch instead of the 4 if i dont want the backlit light? i bought one of those ledmiry rocklight kits and want to get the right size rocker switch for it
It’s a logo I designed and then my sister in law put it on a shirt for me! Standby, I’m gonna be making shirts with a couple logos I have! They look pretty sick!!
Did your Ditch lights wiring have the same color? I had purchased the Diode Dynamics Ditch light and the switch have black and 2 red wires. I'll be connecting it to cali raised OEM switch too, but i have no clue where the two red wires from Diode Dynamics will connect to the oem switch. Any help would be great. Thanks!
I didn’t see you mention how you connected the light bar? Did you not connect it to the battery? Which part went to the battery? Maybe I missed that part 🤷♂️
The wire next to the black on all switches goes to circuit for your dash. In other words this will light up the words on switch when the car is on. The wire next to green on switch always goes to lights this will power up lights. This method will allow both icon and words on when in use.
Thanks for the info!!🤙🏼
These switches use 2 bulbs. Is there a way to have the font “light bar” be lit always (with the dash lights) and then have the light bar image only illuminate when the light bar is actually turned on? I feel this would be as oem as possible but may be difficult to wire it this way..
Bu yorum diğer bütün videolardan daha fazla işe yarar ancak benim bir sorunum var . Sorun şu ki kontak kapalıyken ışıkları yakabiliyor olmam 😅 nerde yanlış yaptım bilmiyorum
And where does it get connected if that’s how you want it connected? Just connected mine but not sure where it goes? Thanks for any information!!
I appreciate your honesty. Therefore I subscribed. Because you are honest saying you don't know what you are doing. I did this stuff over 30 years ago with my 77 CJ5. Back in the day it was so much easier because it was bare bones and not all this electronic crap!
I just got my 21 TRD Offroad, and have no clue with all the wire. I plan to do it a little different going with the trigger contro. Have to be careful as to not void out warranty items. Thanks for the great content
Thanks for the support!! I’ve had my truck for over a year and still don’t know what I’m doing when it comes to the electrical stuff 🤣 congrats on the new truck!
TacoMan D!! Brother I appreciate you breaking down the wiring steps and being honest about your electrical skills. #TruthPaysOff #ReadyForMoreContent
Thanks for the support man!!!! More content coming!!
If u connect the free red wire only the Lightbar (word) will lit up. When hit the switch to engage the light bar both Lightbar (word) & lightbar image (on top) will lit up.
I like lt lit when its dark. Easy to see.
Thanks for adding this comment! I'm try to install 4-pods this weekend and definitely want the switch lights on.... Where would I need to connect the free red wire to make this happen?
@@ebx2323 You can connect it to your ignition, you'll need add a fuse kit.
He explains it in this video. Around 2:00 mark
ua-cam.com/video/O3VBAGfCdNw/v-deo.html
Wait there’s a way to do this!!?!? I’m looking to do it this way! Have the font lit always and then push the button to activate the light bar and have the lightbar image light up.
@@sharpshooter012345Thanks for sharing 👍
Appreciate your install video! Helped me do my bumper lightbar on my TRDP. Thank you and keep it up!
Hey man! Does this have power all the time? I just installed a similar one and it has power all the time. Not sure if that’s bad for my battery but can you help explain how that worlds cuz it’s connected directly to the battery
Hey dude, if it is backlight with the blue light all the time then you have the wiring wrong. Did you match up the wiring like I did with mine?? Or were your wires different than mine?
I’m having the same problem. Any info you learned? I wired mine like I’ve seen in many videos
would i jsut be able to connect the 3 wires on the switch instead of the 4 if i dont want the backlit light? i bought one of those ledmiry rocklight kits and want to get the right size rocker switch for it
This video fixed my issue. Thanks!
Awesome!! Glad to hear that🤙🏼
Wait wait wait! How could I get one of those shirts your wearing. Simple design but bad ass!!
It’s a logo I designed and then my sister in law put it on a shirt for me! Standby, I’m gonna be making shirts with a couple logos I have! They look pretty sick!!
Where are you getting power from?
Stock battery
What tools do I need also what did you connect you OEM switch with
Hey what size crimp connectors did you need?
What smartwatch have you got?
Apple Watch 5 with a “Supcase” 👍🏼
My switch is continuously on …. Not sure I followed yours and the ch4x4 instructions…. Any ideas ?
Having the same issue. Did you figure it out?
Me too, same issue. Any ideas?
I would suggest the SP-9100 SWITCH PANEL POWER SYSTEM and TOYOTA TACOMA SDHQ BUILT SWITCH PROS OEM KEYPAD MOUNT.
Awesome installation
Thank you!!
El rojo enseguida del negro es para q las luses del swich se ensiendan y es va conectado con el q biene del relevados positivo
How do you open the hood with the ditch lights
The same way as if they weren’t there lol they don’t obstruct it
Caliraised has a switch wiring video.
Where's the Cali raised switch bar video located at?
Plus you really should disconnect the battery before you mess with wires!
I mentioned that in my video!
Did your Ditch lights wiring have the same color? I had purchased the Diode Dynamics Ditch light and the switch have black and 2 red wires. I'll be connecting it to cali raised OEM switch too, but i have no clue where the two red wires from Diode Dynamics will connect to the oem switch. Any help would be great. Thanks!
Done wired it wrong.
I didn’t see you mention how you connected the light bar? Did you not connect it to the battery? Which part went to the battery? Maybe I missed that part 🤷♂️