Squier Mustang CV 60' - Dynamic tremolo setup guide.
Вставка
- Опубліковано 2 лип 2024
- After few months of owning this superb guitar I decided to try making some setup tutorial. There are lots of bad opinions about Mustang Dynamic Tremolo, and most of them come from poorly setup guitars. I tweaked it to the point it plays like a charm. So if you got a Mustang with tremolo try to set it up correctly and enjoy the ride!
Time stamps:
00:00 Intro
00:21 What's all about?
01:08 Neck.
01:50 Strings height.
02:30 How Dynamic bridge works.
07:25 Re-string of the guitar.
10:18 Maintenance.
11:50 Nut.
12:20 Putting new strings on.
15:40 Tuning.
17:50 Lets hear how it sounds!
Gear used:
Squier CV 60s Mustang
Orange TH30
2Notes Torpedo Captor
Lewitt LCT 240 PRO
Audient ID4
D.A.W. - 2Notes Wall of Sound
![The Perfect Stratocaster Trem / Vibrato Setup [Floating, Flat Or Blocked?]](http://i.ytimg.com/vi/PjVXWyUGpwc/mqdefault.jpg)
![The Perfect Stratocaster Trem / Vibrato Setup [Floating, Flat Or Blocked?]](/img/tr.png)
Honestly, I admire that English isn’t your first language but you still had the balls to make the video anyway. Great job 👍
Well I listen to lot of stuff in English, and write some, but I don't have too many opportunities to talk in English so my speaking is quite sloppy. I'm searching for word's I need on the fly ;D
Thank you for the essential explanation, I just improved the adjustments of my new Squier Mustang. Lowered the bridge a bit and lifted the cigar (a lot). Nice low action, and now I can really surf 🏄🏼♀️ on it.
TY for what you do. I appreciate those who share knowledge.
I do my best ;)
Great video! However, contrary to what you state in the video, you can actually change the height of the saddles by adjusting the bridge height with a hex key.
Thank you, extremely helpful! I'm a pretty experienced guitar tech but have not owned or worked on a Mustang in over 30 years. I just received a brand new MIJ Fender Traditional 60's. Wonderful guitar but the factory setting for the tremolo was atrocious. I had to LOWER the cigar-tube A LOT and a little trial and error with your video as guidance and it is spot on now. This bridge and tremolo is really unique in terms of the steps for a proper set up and this video is great.
I've watched couple videos and done some troubleshooting enough to share some thoughts about this setup. I'm very glad that this video was helpful for you ;)
Dzien dobry, I have a CV Mustang too and i love it!
great video :)
Hello, From the StateS 🇺🇸 I'm new to your UA-cam Channel. Thanks For Sharing 🎸🎶 ✌
Excellent explanations. Thank you so much for doing this video. I have a problem with a Fender Mustang that doesn’t hold the tremolo bar even when the little screw on the side is tight. Any tips?
The bridge does have height and lower adjustment. Those two holes at either end have a threaded black thin rod, if you take your smallest alllen wrench in your tools that come with guitar. The bridge can be adjusted up and down. I too thought it was a fixed bridge, but I found it by accident. Hope this helps.
It's crucial for Mustang setup, I thing I mentioned it in the video ;)
I think he was referring to individual saddle height adjustment...
That was some real nice playing at the end. I just bought this model Squier. It’s the first Squier guitar I bought that was unplayable out of the box. Absolutely impossible to get the guitar in tune. I’ve never done intonation on a guitar but this guitar would need it and a complete setup. I could play lead melodic lines with it but chords were impossible. Not sure if I’m going to keep it. It’s a really unique guitar and actually inspiring to play (avoiding chords) but I’m not certain if a setup is all it needs. A guitar should be playable right out of the box. I don’t understand why manufacturers often send guitars out that have tags showing who inspected what, but essentially are not set up properly. If someone got a guitar for a gift that was this messed up it would really chill the glow. I got several Squier Basses that were absolutely excellent, but the Mustang I got was bad off.
I get your point, but guitar is made of wood, it's impossible to ship it with full setup worldwide, truss rod should be looser then normal etc. And then proper setup cost money, if You buy a cheap guitar expect that you need to full set it up by yourself. The solution is to buy it in your local store so they could set it up for you. I'm not sure if it's good for a beginner guitarist, I would recommend something with fixed bridge.
Every guitar can and should be set up. Cheap guitars definitely do not come set up and often are totally out of whack. Most guitars in stores are also not set up. It's no reason to return a guitar. If you have no idea how to do it give it to a good tech and then learn how to do setups yourself, it's literally a matter of turning a few screws. Mustangs require a bit more finesse.
@@AndreaAustoni Yeah, I took it in for a setup but I’m going to acquire some tools and learn how to do it myself.
i got 2 that were so bad i couldnt belive that anyone inspected them!!!! im now waiting for the 3rd one, i hope its good cuz i wont be able to return for the price i got it for. Its a shame how bad qc is on squire mustangs.
Thanks for taking the time to explain all of this! If you don't mind helping me out with a question: I recently got my new CV Mustang set up, but noticed yesterday when I put the whammy bar on that the cigar doesn't return to the same position when you press the bar down or up, so whenever you use it, the guitar goes out of tune and you have to "find" the tuning my putting the bar exactly where it was before.
What could be the issue? The luthier told me he'd raised the cigar because the angle on the strings was too small, and they were touching the intonation screws on the bridge, but now it looks like it's crazy high. Could this be the issue?
Thanks!
There's a solution for that, swap the bridge so the intonation screws are facing the neck, and then shave of some metal on the other side of the bridge so there will be more room for strings behind the bridge. Then You have more room to adjust it. I recommend using one degree shimm on the neck and then set everything up. With 11-48 gauge strings and standard tuning it should do the trick.
If you want to change tunings, do you have to set up/adjust the height of the posts/cigar all over again??
If you won't change the string gauge to accommodate the altered tuning it may need some little tweaking.
any idea why the bridge would keep coming forward even if I'm not using the trem? also it goes really out of tune if I do use the trem. the strings aren't touching the bridge like you said, so idk what else it could be
It's all about the tension. In your case the tension of the strings is bigger then the tension of the springs under the bridge. Also I discovered that the bridge likes to have it's neutral position leaning to the cigar a little. In this case I can use cigar and have my guitar in tune.
I have a few different shims, a .25, .5 and 1 degree. Which did you use or would you recommend?
Maybe start wit .5 and go from there. I'm thinking about putting 1 degree right now.
Thank you for the explanation! This video helped me set up the tremolo and it is perfect now! Doesn't go out of tune at all. I got a question if you don't mind, what pickup height do you recommend for the CV Mustang?
I don't have any rocommendation on this matter, you must tune it by ear. They shouldn't be to far from strings neighter too close.
@@riffsandpancakes I'll try using my ears for once haha, thanks.
do you know the size of the cigar height adjustment allen key
It's like 2,5mm so m3 allen key I guess.
Do the washers have threads and screw onto any threads of the posts?
What washers?
Thanks so much for the video :) This is what I've been looking for months now!
I watched the complete video in search of a solution with the tremolo system of my Mustang: I can only push the whammy bar towards the body but I cannot pull it like you do with jazzmasters or jaguars. Should I raise the tailpiece (cigar) or what would you suggest to make it work like a normal Mustang vibrato?
Thanks so much for the informative video, nonetheless!
Best regards from Mexico City!
Yes try raise it a little, then it should pivot in both directions. The goal is that the string behind the bridge saddle should go just a hair above the bridge, so another place of contact for the string is cigar. If the strings touches end of the bridge it cuts all the lovely harmonics "behind the bridge sound".
@@riffsandpancakes thanks a bunch, my friend :) I'll try to do that. These Mustang vibratos are tricky when you're not very familiar with them but I'm sure they're worth it!
@@brunokubin If you nail the setting they're very rewarding in usage ;)
Please tell me how you got the cigar so that the hole for the trem bar is on the top. Thank you!
Well it's the only way you can get it, and it's through hole.
I think he means that the cigar is at 90 degrees with the guitar top so the hole is exactly on top. As far as I understand, you need to remove the tremolo system and move the 2 springs to another thread to add or remove tension. Changing strange gauge will also change the tension.
Does the whammy bar snap in? Or does it just sit in it freely?
It goes freely in, and then you need to screw it in with the side screw.
This guy sounds like Skwissgar from Metalocalypse!
I love riffs, and I love pancakes🎸🎸 🥞🥞
That's a dream come true combo IMO ;) And maybe coffee ;D
@@riffsandpancakes absolutely kind sir!
i have one and it's a great value well made guitar and sounds awesome. BUT the trem sucks, let's be honest. most of us have a few guitars, so if u wanna play a lot of whammy stuff, this would not be the one for it IMHO. Hardtail this and get something with a good trem like a mastery or a strat style . :)
one more thing... haha. the slider switches are cool looking but are not as practical as a 3-way on the fly. I still love it for what it is .
Jazzmaster/Jaguar vibrato is much better.
Did I miss the Pancakes?
Check out my video about Fuzzly Bear ;)