eBike Factory: Connectors from Julet
Вставка
- Опубліковано 23 лип 2024
- Take a trip with one of more ubiquitous eBike parts out there: the Julet connector! Such attention to detail on the small details can get a lot of attention if detailed attentively.
Here's there site: en.junleidq.com/
They also go by the name Junlei, for their far east customers, in case you're curious.
If you'd like, you can go to bluemonkeybicycles.com, but it will lead you back to UA-cam. Up to you... - Наука та технологія
It's finally nice to put a factory to the name Julet, ever since my first kit I always wondered who made these waterproof connectors, it's also nice to know they are all made under one roof I always assumed the designs were just licensed out and each different ebike kit manufacturer made them as required - still though it's not a common name tag on ebike related products I either search by picture or "waterproof" if I need a controller or after market part.
ever tested looking on the actual contacts`?
Hi ! Great topic. ! I’m trying to find a 3 pin to 2 pin adapter for my Lectric XP2 …any thoughts or suggestions ? I’m trying to connect brake sensors as part of a hydraulic brake upgrade. Any thoughts appreciated.
And now when plug head breaks, from moving battery in and out . Your gotta replace whole module or do they make a plug head fix ?
I need to change from a flat connector to a Juliet connector to upgrade my CYC gen 1 motor to ASI controller. Any instructional videos on installing the JULET connector?
Is there a way to tap a higo Z910 Julet connector for USB power? I have a bafang hub motor and a 52V battery and I want to add a USB device in between.
Nice. Fit easy and tight when new, impressed. 3.5 years later plastic has hardened and cover slipped back exposing pins. will dielectric grease help, or heat?
Can I ask a question I have a (9pin) Juliet connector on my rear bike motor where do I look to see what type of battery connector do I need since I want to upgrade my battery ah can you help me with this info I have a shwinn sidewinder 26” 36v 10.4 ah 250w can you plz help me with this thank
Your thoughts on using Permatex DiElectric grease on connectors to make dis-connecting easier?
Hi I own a 500W Samebike and these bikes do not have a connector in the controller/hub motor cable. In the event that one needs to simplify the detachment of the rear wheel, which Julet connector is the one to order ? Thanks
You'd have to ask the bike company
How do you test with a multi meter. My motor is not engaging
i need a 100mm julet 2 pin male to female connector, where can i get that?
Hey Mikey,
The Julet on my Pulse zr2 has snapped now my bike doesnt work,
There is 11 wires going in and 8 wires going out, how can i connect these wires with a crimp wire connector ? Or do you think there is a better solution.
Thx
Connectors are custom made for bike (or system) companies.
I'd contact the bike company who makes that bike for help
my julet cable melted, which one can handle 1000w?
Hi Mikey. Very good video. It would be nice if you explain the colour wire where they get connected from to where. Many thanks in advance.
Those are all custom for the bike company. They're are trends, like red for positive, black for negative, but ultimately, each bike is different.
@@BlueMonkeyBicycles Exactly there is NO standard and every e-bike manufacturer connect the wires differently.
What are the spec of the connector shown in the thumbnail?
I need that one
Pls help!!!!!
That's a motor connector. I don't know of anywhere to purchase just one. If there's a bike store nearby, you can take a long shot and ask if they have a busted bike, and you can hack those connections and be on your merry way
I always wondered what this connector was. It is nice and compact. The other connectors in the waterproof controller are randomly called m5/m8 cable. Another connector that is used in between controller and accessories is called 1T4/1T5 cable. These names are not standard.
Fantastic, the Julet plug has become a de facto e-bike industry standard BUT I can't find the bloody plug anywhere!!!
Thanks. I need a 2 contact male/female adaptor plug for my new headlight.
Hey I need help.
Most ebike wheels are not in julet connector but I need it in julet.
Will that work to convert it?
Please let me know asap
These parts are rarely sold individually to end users. These connectors are sold in mass to bike companies.
If you can't get a spare part, you may need to change the system (hopefully not entirely).
@@BlueMonkeyBicycles That sounds like a stupid monopolistic trick to force end users buy what they don't want to!
How should you separate Julet connectors so that checks can be done (on a non-working Swytch bike).
The connectors are designed to be pulled apart by hand
@@BlueMonkeyBicycles that's... hilarious. What's the real answer though? Or have I just slacking on "finger day" at the gym?
Other reasons why they are coming out with quick connection water proof cable is because they don't want you to swap the controller ( they are trying to limit your top speed ) that is for example 26 amps for another controller that might end up being probably 40 or 50 amps continuous discharge current, which pretty much allows you to reach a higher Top Speed at the expense of amp hours...The con to this will probably be that your battery will be depleted at a faster rate therefore you are going to have to charge the battery more often than normal plus another con is... 👉...less 🔌charge cycles left for the🔋 battery which refers to life for the battery it's definitely something to think about. If you do decide to go with a higher amp discharge controller make sure that the BMS inside the lithium ion rechargeable battery grants you to discharge the battery at 40,50,60,or 70 amps (normal) continuous discharge and not peek discharge / something else. The pro to this cable is quick,simple connection. The con to this cable is you won't be able to find out what color cable is positive,negative,phase wires,Hall sensor wires,etc.
These connections have been out year's
I have a 48v 12.5 ah battery and I want to buy a 48v 28ah triangle battery, but my battery has a julet cable from it going to the controller but the 28ah has a yellow square connector, so how would I connect the new one? If this made sense lol🙄😀
Where can i buy julet connectors in India.
Do they sell direct to the public? Looking for a waterproof connector.
Not that I know of
Superb. Thanks!
MY LEAD KEEPS POPPING OUT WHEN IM RIDEING OUT! ANY ADVICE PLEASE 😰😰😰😰😰😰😰
Sorry sir...I want to cut the engine cable that is horrible whitout jacks and put two new connectors so i can change the back wheel free...u think It' s possible...
They really are the best, that's why we use them in all our bikes!
Y'all got bikes? Tell me more
Neato
The web address on their site does not open anything....
I need a 9 Pin Conversion Cable for my ebike motor. How do I know what pin goes where ?
You really can't find this unless you go to the kit/bike company.
Or you can test it yourself with a multi meter and manipulatable inputs
I am here because I need to learn about these to fix my bike. I didn't learn a thing. Thanks!
Take the bike back to the store you got it from, they should be able to fix it.
I broke my connection wire beetweent the screen and wireingloom to the bbshd moter can I cut them off and joint them together
I guess you got nothing to lose
@@BlueMonkeyBicycles I have ordered a new wireharness was cheap only like 23.00 pound so ya do you think it would work tho if I chop the ends off as my new one come Friday
I would just wait for the new one, if it were me
@@BlueMonkeyBicycles ya I going to I ride a trek caliber x9 converted to electric its amazing
Great, now when we need to troubleshoot/test the hall sensors and motor phase wires we either have to open up the controller to find where the wires terminate, or do permanent damage to the cable outer jacket to tap into the wires. This makes troubleshooting take so much longer.
Most people don't do this kind of detailed work, and you know it.
@@BlueMonkeyBicycles Many people who are e-bike DIY they DO need a stupid spare Julet plug but I can't find it anywhere!
Nice video. My three ebikes have Juliet motor connectors.
Sweet! What bikes do you have in the stable?
Three Grin SAW motor conversations on Bromptons
Factory tour on HIGO next? And don't forget Amass bro!
@@davidsonshine9678 Slammin! I'm not sure which factories I'm off to next, there's a few stars that need to align. I haven't seen a battery factory yet, and I'm pushing for that.
Ali express has the wires I just saw $15?
Don't buy from them unless you want to be on fire.
The best a man can get
lol
How much are the people in china getting paid to make julet connectors
Don't leave me hanging handshake 😁
Hello Mikey, are you able to share with me the factory' s contact, I need to make a lot connector for my project
How many?
My wife's connector broke inside pins connection
I have them
You cut our FAT-AWD bike🧐
Only in the magic of video can you crack open a bike like an egg!
when you don't know the answer to a question you just don't reply is that how it works??
wtf you want him to say?
Connect it and disconnect it few times and it will brake...
OK
I need a front and break light so drunk drivers do not run me over. This vid is not helpful for that.
This video is about ebike connection factory. I don't have an ebike light video quite yet.
So basically all you said is that you like them.
You are ignorant.
common courtesy is to at least reply with a DONT KNow
Is there something you're referencing? Because you haven't made a reply, just an opening statement.