How to Replace a PC Board in a Wine Cooler

We show you how to replace a broken PC board in your thermoelectric wine cooler. All it takes is a few minutes and some simple, household tools.
In a wine cooler, the PC board distributes power between several different components, including the fan, cooling kit, temperature controls, and interior light. When one breaks down, it can cause a lot of serious problems. The good news is that these boards are easy to replace and in this video, we walk you through all the necessary steps. We show you how to remove the back panel, disconnect the wiring, replace the board, and re-connect the wires, so your wine cooler works as good as new. The whole operation can be done in less than 10 minutes. You will need:
1. Philips Head Screwdriver
2. Power Drill
3. Wire Cutters
4. 18-Gauge Wire Strippers
5. Electrical Crimps
6. Wire Crimper
7. Zip Ties
For your safety, make sure the unit is turned off and unplugged before you attempt to remove or repair any of the pieces inside the cooler. PC boards can be purchased by contacting NewAir customer support. Make sure you have the wine cooler model you’re calling about in order to make it easier to get a replacement shipped out to you.

[@nigelmayne522]

this is a great video, thank you, even a lay-person like myself can do this, my only concern is that my existing wine cooler has lights on and I just want to be sure it is he board I need to replace. I think it is unlikely that both of the "heat exchange units" are defective so I would assume its the board, how can I tell?Mine is an AW-321ED with 4 cooling inits and two boards and it is only one side that does not work so I am thinking it is the board. I would very much appreciate any feedback or advise, thx

[@jjr9723]

My wine cooler is haier it uses the same parts, and can you put the link where i can get it and the thermoelectric cooling system

[@jtampa3]

did the cooler stop working, I have one with a single fan it comes on temp works but it's doesn't seems to be chilling

[@dnktravel]

My replacement pc board from Newair did not have the red and black wires attached to it. Now what?

[@dunacting]

When can you get a new PC Board? Also what happens to the NTC1 cable in the new board doesn't have a connector?
Does that mean the NTC1 cable is not necessary?
Many thanks.

[@diedericho]

Great video but where do I get the board?

[@newairusa]

Give the customer service department a call: 1 [phone]
They can help you out

[@j.paulrobinson1095]

it would be useful to know where you got the board from?

[@newairusa]

Hey there, here's all the PC boards we have available for purchase for our products. Hope this helps!
www.newair.com/search?q=PC+board

[@nicholasubillus2912]

So where did you get the replacement board?

[@newairusa]

Hey Nicholas! If you contact customer service at [e-mail], they can help you out with getting your replacement part!