Making A Leatherworking Half Moon Tool 🌙
Вставка
- Опубліковано 21 вер 2024
- Upcycling a high carbon steel circular saw blade into a classic leatherworking tool.
Want to see how it's supposed to be used? Check this video by @DarkHorseWorkshop
• How to Build a Sheath ...
And while you are there be sure to subscribe for great content all about leather!
Index of operation and materials:
0:30 Rough shape cut with angle grinder and cut off disk
1:17 Coke forge used to heat the metal
1:30 And bend the tang in position
2:06 Anhealing the steel to make it soft and easy to grind
2:25 Mark outline of tool I have drawn on paper with spray paint
2:30 Grind profile to shape with 2x72 belt grinder
3:17 This inside radius is easier to shape with a die grinder and abrasive stone bit
3:50 Hardening
4:00 Remove scales with bench grinder and steel wire wheel
4:16 Grind bevel to zero with 2x72 belt grinder
4:50 Hand sand up to 1200 grit for a mirror finish
5:15 Buff to mirror with bench grinder and fine polishing compound on cotton wheel
5:40 Prepare handle material (possibly cherry wood, not sure)
6:10 Handle is turned on the 1912 wood lathe
6:55 Only critical measure is the place for the steel ring on top
7:15 Cut excess material with bandsaw
7:50 Press the steel ring, friction fit
7:50 Drill hole for blade tang
8:00 Split dowel used to secure the tang.
8:20 Boiled linseed oil to protect parts and help them fit one in the other
8:50 Turn a brass cast ingot into a small disk for the bottom of the handle
9:13 Stamping initials
9:26 Antique patina to darken the letters and make them pop
9:40 Buff the raised parts with fine steel whool
9:50 Glue the disk with a drop of five minutes epoxy
10:13 Boiled linseed oil as finish
10:23 Stropping the edge with fine polishing compound on a piece of leather
I just started to list some of the stuff I use for my projects in this amazon storefront:
www.amazon.com...
It's affiliate marketing, so if you order something from here you'll help the channel for free! Thank you!
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproje...
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects
Hey! Watch this next!!
ua-cam.com/video/1qYFYLmA3aw/v-deo.html
If you want to know more about any particular process shown in this video be sure to check description, I always write detailed list of operations and products used.
And if you like what I do consider supporting me so I can keep on making, join as channel member or check my Patreon for early access and voice-over edit of my videos. Thank you!
Hey BBP, not sure if you know about this or not but you can add captions to a video so you can just write the detailed list of operations there and they will pop up in the video. (Then it's up to the viewer if they want to see that info or not). I'm not sure how you do it currently but maybe it will save you some time? Just a thought! :)
Good 💯🌹👌☺️👍
Quick question! When you use a respirator, do some fumes go through due to your beard or can you mantain a good seal?
Did you have coronavirus
👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Nice work. However, as a working saddle maker for nearly 50 years, I would recommend anyone wanting to make a round knife, is just copy what has been made for donkey's years, and leave it at that. For the serious user in heavier leather, the knife should have a gentle convex grind from well into the blade out to the edge, on both sides. These heavy short bevels I see being ground on round knives would possibly be fine in light leather, but I couldn't imagine them in the heavy stuff, say 4mm and thicker. I am constantly into harness leather , sole leather etc, and one needs all the help one can get. The outer two points are very important for accurate cutting , and are best a little wider than the knife is round , so to speak. Handle needs to taper from butt to ferrule, because when laying the knife down to skive, flanges will be a hindrance. Please yourselves, no skin off my nose. I have more than fifty round knives , some going back a century, and all different makers. They all have the features I have mentioned, because that is what works, in all types of leather!
I mentioned wanting more leather-working videos and 2 weeks later here it is. I don't know if he was seriously listening to his viewers or not, but I hope so! This dude is amazing.
Very beautyful work My friend 👌👌👍
Красавчик, лучшие ножи, безподобная заточка. Сил, удачи, новых идей и побольше наличных!)))
Спасибо
Ну и зачем такое чудо непонятной мысли?
@@starlord1978 а причем тут Вы?
@@wach4oo603 а вы?
@@starlord1978 не знаю :)
Just beautiful. I Know what I'll be doing with my old high carbon steel saw blades now. Nicely done sir 👍
Nico! Just got some saw discs - way to go. Thanks for inspiration!
There's something about the startup noise your belt grinder makes in fast forward that is oddly satisfying.
Действительно мастер!!! 👍👍👍.У меня тоже есть 2 диска ,и вот всё думаю во что их превратить ?Спасибо большое за идею! !!!!!
Killer. I have a few saw blades I've been making blades from and was thinking this would be a good idea! Nice job. Love it!
Красавчик. Работа на высшем уровне!!!!!!!
I need one of these tools. I hadn't considered making one. That's a great idea.
This is fantastic work. Love the wood. Hope you and your loved ones stay safe in the current crisis.
I'm so happy to see you post a new video. If I remember, I think you are in Italy. I know your country is enduring a great challenge. I know that the challenge will be met by people like you. ..........God speed and, God bless!
Your videos have inspired me to go to the next level of my hobbie ,but the thing that really impress me is the way you fit your handles to the tools you make . the round hole then the dow rod is a super smart idea. I have done this twice now and I Am very happy with the results .so thank you and looking forward to moore gratr ideas. cheers.
I love when Black Beard just makes his own stuff. Most of his workshop has been restored, or crafted himself.
I know. This exact thought came to mind with the mallet. That was ages ago and here he is using it for a brand new project.
That came out great. Take care of yourself buddy. Y’all are a little farther along than us yanks
Todd halfacre ghvjgnfncnc
Крутой дядька! Руки «золотые»!
I saw that tool in my family (grandfather) workshop!
Good job!!!
DEUS TE abençoe sempre VOCÊ e sua família
Parabéns pela iniciativa
Parabéns pelo trabalho Guerreiro
Parabéns pelo seu vídeo
BRÁSIL
São Paulo
Invaluable tools great sir your hands sharpness very good
Não sei que ferramenta ou arma é essa.Mas tu é muito bom no que faz.Parabéns.👏👏🎖️🎖️👏👏🇧🇷Fron Brazil.
Love the sounds of Formula 1 race cars in background.
Отличный получился очень удобно я себе тоже из диска делал
La cosa positiva della quarantena è che da tempo di fare i lavoretti in garage
Wow! That turned out beautiful.
Looks like a Stingray !!!!!! Awesome leatherworking Half Moon Tool !!!!!!!!!!!!!!!!!!!!!!
Ingenious use of safety tools. Very impressive
Making a dowel to fill up the hole in the handle is GENIUS.
Yeah.
Speed up the fitting process like crazy.
Beautiful work. All the ones ive owned have both sides sharpened not sure if it makes a difference
Excelente artefacto, gracias por compartir en la red. Esta bárbaro
Looks like you made yourself a nice Eskimo knife an uluu with a real funky handle...good job!
Молодец! Правильные руки!
Дело мастера боится!!!Сделано с любовью!!!
Excellent workmanship.
Super 👍 robota kolego 😊
Pozdrawiam serdecznie z Polski bądźcie zdrowi ☝️
عمل عظيم ، يستاهل مليون اعجاب ❤👌
Nice work, like the end result 👍
You need a mortiser for your drill press,to make rectangular holes for the tangs. It's like a hollow chisel with a drill bit in the middle. Look it up,they are cool as hell and been around for about a hundred years or so.
But... why? This tang does not have regular shape, and his solution is just great. I'm definitely stealing this dovel technique.
Great video as always, thank you. I'm glad you are still creating, with the current situation, hope all is going ok.
Canoas RS - Brasil.
Muito bom, parabéns!
@The-Man-Who-Chortles jajaja, es cierto, el shampoo tiene parabenos... 😁😁
Bravo !!! Doctore !!!!!!!!!
Hopefully you'll have time to answer questions. First of all, did you quench in water? Secondly, did you not have to temper? I'm asking because I have circular saw blades and have already started one knife....but some instruction would be awesome
love this restoration
Me encantó da gusto verte trabajar lo haces ver todo como si fuese tan fácil super 👍👍👍👍👍👍👍
How do you decide whether to use hand tools or power tools? You used a hand saw, to cut the blank, for the handle but then you used a band saw to cut off the end, after the lathe work.
5:37 на скорости 1.75... Флеш нервно курит в сторонке👍👍👍🤣🤣🤣
Это очень круто, вы молодец!!!
Its a work of accuracy and patience. I can never do it
Toute mon admiration du bon travail respect
You are awesome. Excellent work!
That was beautiful man.
Linnnnnnnndo mto maravilhoso você é um génio louvado seja Deus que DEUS TI CUBRA COM TODA SORTE DE BÊNÇÃOS 😘❤
You are a Genius!!!
Beautiful project
Really beautiful blade! The brass insert is a really nice touch!
Thank you, Sir. You inspire me
Nice tool. Very well done Sir. Enjoy you ability to do what you do. it's a bllessing. .
Very nice and I enjoyed your video also gave it a Thumbs Up
Hello, a long time ago in Russia such an instrument was used together with a trough, cabbage, meat and other products were chopped in the trough with this tool. Such an instrument was called a cross-section.
Very interesting! Thank you for the great idea. After you quenched the blade did you have to anneal it?
great job 👍 have you considered trying a hot black oxide on projects like this? i think it would add that extra touch without costing much more to make. just thought that might be something to look into keep up the great work
You're doing great. You're a master.
Когда руки с того места выросли)
Все идеально!)
Nice job man amazing craftsman ship and style.
Muito bom o seu trabalho.
Rio Branco ACRE- Brasil
Good job, go on.
Thank you.
Parabéns pelo trabalho. Muito bonito. Criativo!
Absolutley beautifull!
Excellent work.
Very nice. I need to make one for my leather working but will wait until it is not too hot to light off the forge.
Nice!👏🏻👏🏻👏🏻👍🏻
Good Job
🇧🇷🇧🇷👍
Is it weird that those vids are chill to watch??????
It turned out great; if I had a choice it would have looked even better if the entire metal surface was buffed/polished like the angled blade area. jmo
IMPRESSIONANTE!!!!!! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 🇧🇷
Leaving the saw teeth on it would be a great zombie axe 😉, just in case ha
Incredible hands...incredible idea for an old rusty saw blade...Great Job👍👌🤙💯
Very nice leather working knife . I want one !!! 😀😀
A fellow Parkside user... nice
I like the way you edit your videos and I like the sparks flying
Thanks very match, 👍from bacia amazônica 🇧🇷brasil👍🍻 congratulations
Wow that turned out beautiful!
Fantastic job 👍
Once again a job well done!
I don't know why I watched this but it was great
Truly Amazing craftsmanship!
Really interesting video, nice job, came out great. Look forward to other projects.
pravo very perfect work 🇮🇶
Good Craft man
With 💗 from India
TOP NOTCH 👍🏻🇬🇧
amazing works
Born of fire
you do great work-thank-you ..they have been an inspiration to me to do my own stuff
Работа спору нет , как и любая работа требует, уважения . Непонятно , где применим, такого типа лезвие . Таких пил у нас много . За роботу большой респ !!!
Капусту резать
Для шенкования капусты в корыте применяется
Ты - Мастер ☝️👍👍👍!
Fantastic job....
Молодец не каждый так сможет !!!)
Cuantas envidias los que han puesto los no me gusta....Gran trabajo campeón y mis respetos
Bravo bravo bravo!