Trash To Cash! Knifemaking / Restoration Of The UGLIEST Flea Market Knife Ever
Вставка
- Опубліковано 16 січ 2020
- Install Raid for Free ✅ Mobile: clcr.me/FgR8TQ ✅ PC: clcr.me/iCqSNt Start with💰50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards” program
Yes! Another knife restoration. I love making this kind of projects!
This rusty old knife came from a recent visit to my town sunday flea market, needless to say I paid pretty much nothing for this. I guess it's no surprise, not many would buy something in this condition right?! But I knew it had potential. Under rust, dust and bad welds the steel is nice and hard! (between 50 and 55 Rhc) We can even see a hint of a makers mark, unfortunatly incomplete, so I am not able to discover when and where it was made and for what specific use. Still cool!
For the handle I used: stainless steel, ebony wood, white felt liners, stabilized cork and stabilized curly maple (I think it's maple, not sure).
I just started to list some of the stuff I use for my projects in this amazon storefront:
www.amazon.com/shop/blackbear...
It's affiliate marketing, so if you order something from here you'll help the channel for free! Thank you!
Here are some of the videos where I go in more details about tecniques and tools used in this video:
Stabilizing wood: • Stabilizing Wood With ...
Vacuum pump and chamber used to stabilize: • DIY Vacuum Pump And Ch...
Felt liners: • Felt And Resin Liner /...
Stabilized cork: • Cork Stabilization IKE...
My lovely drill press: • ROSA Drill Press Resto...
My lovely buffer: • 1950s Italian Bench Gr...
Ind ex of operation and materials:
0:30 Weak welds, easy to break loose
0:54 Electrolysis: water and sodium carbonate solution, parts connected to negative side and steel sacrificial anodes to positive sice of a DC power supply (car battery charger). 2-3 hrs at 5amp.
1:17 Remove patina with steel wire brush in water
3:16 Cut off disk on angle grinder to remove ugly welded tang extension
5:05 Remove rust and patina with steel wire wheel on bench grinder
5:17 Fill old pin holes with stick weld
6:12 Transfer design with paper template, small magnets and random spray paint
6:31 Re-shape on 2x72 belt grinder, edge kept cool with water bucket
7:18 Round cornes with die grinder and stone bits
7:40 Grind new bevels on 2x72 belt grinder, edge kept cool with water bucket
8:00 Hand sand to 600grit sandpaper
8:20 Etch in ferric chloride
8:30 Satin finish with fine steel whool
9:06 Notch onthe tang for glue to grab later on
9:50 Cut materials for handle stack
10:16 Grind faces flat
10:46 Glueing the handle stack with 5 min epoxy resin
11:19 Grind square
11:38 Drill tang hole, 10mm in diameter
12:17 Mark and center puch guard holes
12:40 Drilling with 3 mm bit
13:06 Grinding back side with dremel to save some file work
13:38 Filing to size
14:05 Tang dowel took to the exact diameter by spinning on a plate with hole drilled with same bit as the tang hole
14:20 Splitting the dowel
14:32 Enlarge the slot to match the tang thickness on slack of 2x72 belt grinder
15:00 Final glue up with slow setting epoxy glue
16:00 Squeezout cleaned with nitro solvent
16:18 Grinding handle to shape on 2x72 belt grinder
17:00 Hand sanding up to 600 grit
17:34 Boiled linseed oil as finish
17:54 Sharpen with MadEdge sharpener
18:23 Strop on leather with fine polishing coumpound
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
/ blackbeardprojects
★Website★
blackbeardproject.com/
★Follow me★
Facebook ► / blackbeardprojects
Twitter ► / blackbeardproje
Instagram ► / black_beard_projects - Навчання та стиль
Install Raid for Free ✅ Mobile: clcr.me/FgR8TQ ✅ PC: clcr.me/iCqSNt Start with💰50K silver and get a Free Epic Champion 💥 on day 7 of “New Player Rewards” program
what sharpenning system is that?
You made the tang too weak.
Always over engineer.
how bout no should be called raid garbage legends
what sharpener did you use Black Beard Projects
Understand that he's being paid by Raid, but do not actually install Raid. Raid is trash, meant to farm idiots for microtransactions in a "game" that is no fun at all.
It would probably be wise to get sponsored by a company that makes sanding belts... this looked expensive.
Yep, better than to advertize a pay2doanything game...
KYŌDɅI KΞN I see them so often, I just reflexively fast forward through them anyway.
@@tommyhill199 Yep, same.
! SILICON ! - Carbide Legend !! download and play free now !
@@kyoudaiken this comment was sponsored by RAID SHADOW LEGENDS!
Hey!!! If you want to know more about any particular process shown in this video be sure to check description, I always write a very detailed list of operations and product used. Also links to related videos that cover specific topics like making felt liners or stabilize wood!
14:05 I got to try this! Great Video
si
You probably been asked this 4 billion times but do you sell your restorations? And how much for this knife?
I love your work. Thx for sharing.
Hello there. What is the sharpening apparatus called, please? Really enjoy your channel, thank you.
Tomatoes and arm hairs is a typical italian dish.
Can't confirm or deny
Black Beard Projects I can confirm
Don't forget the olive oil and Gouda.
Female arm hair is really the best! LOL!
It is bruh
I literally can't get away from Raid Shadow Legends, they're gonna start advertising in my dreams next XD. Its cool you're sponsored though.
Ahah! Thank you
By now you've probably already heard about Blue Apron....
Don't ever use XD you 62 yr old virgin.
Right when he started talking about raid I saw this comment 😂
Seriously though like about every single video I click on it’s sponsored by raid
You can get away from it...it just cost 11.99 a month 😅
Beautiful restoration and modification. Brilliant solution for the tang. I'll never forget the work that you did on the Slavic razor...nothing else like it anywhere! When you finish a piece I always find myself thinking...'I sure wish I had that.'
Putting a dowel on the tang for an easy fit up is such a clever idea, I've watched so many knife making videos and trying to cut out a perfectly rectangular hole for the tang is always something that invariably goes wrong and takes ages. What a clever idea!!!
Indeed. But an easier way would just be wrapping the tang with electrical tape. At least that's what I do.
@@alanbrunner4116 intellectual
I always fill it with epoxy and pin it.
The reason this isn't done is because its mechanically unsound. The only connection between the tang and the handle is the glue/epoxy between that dowel and the handle. Bang it a few times and that connection will break resulting in the knife handle coming free of the blade. It will either start to turn, or come flying out during use. There needed to be a set of pins through the tang to hold everything together mechanically.
@@mizinoinovermyhead.7523 Been making knives since 1992. No failures yet. Remember the tang is sitting in solid JB Weld and a hardened pin. It isn't going anywhere.
Saubere Arbeit! Das tadellose Ergebnis spricht für sich!
Die Klinge faktisch mit einem Dübel im Griffstück zu befestigen ist ja mal eine ausgefallene Idee. 👍🏻👋🏻
I wasn't keen on the handle....until it actually came together and was on the knife. Then I loved it. Great vid!
Michael Moss I’ve noticed handles are usually the main sticking point in knife restoration videos. Probably because a sharp blade is a sharp blade, but handles are more specifically aesthetic?
Initially it looked like something you'd find under an inmates bed in a Thai prison. End product was outstanding.
Made from a metal bed slat 😂😂
@@zxg77215 its just a joke man. I live in Chiang mai.
Just like me, at first sight I thought "nah, that's coming the first bad video from him". At the end "wow, totally worth to watch till the end"
@@zxg77215 Relax, it's a joke. Don't bring racial politics into this. It's all fun.
Yea I get it is a joke, just want to dig up some story or sort.
Please allow me to delete the above comment to avoid further concern, and sorry for causing any trouble. :P
Mom: You can't play Fortnite today.
Every single 10/yo: 7:16
This comment is underrated
I don't understand what you mean
@@yazanm70 listen the sounds look like screams of the boy who's like "eeeeeeeeee I wanna playyyyyyyy"
hahahahahahahah
KEKW
I enjoyed this knife
18:40 I THOUGHT HE WOULD CUT HIS OWN ARM TO SHOW HIS MASTERPIECE, LIKE A FREAKING VIKING.
Habce WHY ARE YOU SCREAMING
WHY ARE YOU BOTH SCREAMING
WHY ARE WE *STILL* SCREAMING
**!CONFUSED SCREAMING!**
WHY ARE WE CONFUSED AND SCREAMING
How clever is that! The split dowel for handle fitting, and the jig for sizing the dowel... Brilliant!
It's so jarring hearing one of these restoration channels actually talk. Like, literally none of them actually talk while they're doing the video
Breaking the rules
It's the easiest way to do it. Perfect for an antisocial fuck like me. Maybe that'll be my channels name.
I can never tell. I always mute the video.
There is nothing like watching a master at his craft. Epic job.
nicely done Conrad
That was the most complicated way to cut a tomato I have ever seen!
O. L. I know 😂 every cut was wrong!!
@@Crazyknives 😧
Lolzzz 😂
That was something but it certainly was not a tomato.
WOW!!! When I saw what was left of that tang I was so curious about how you were going to repair it for the handle... as always... absolutely beautiful sir!
Wow. It truly was trash to treasure.
I originally thought you'd weld on the needed steel, but instead...
The handle was beautiful. Loved watching every second.
Easily the best knife restoration video I have seen
It’s good to see that you still can’t chop tomatoes 😂
Right? I'm like "this dude knows how to make an unbelievably awesome knife out of a piece of garbage, but he can't sharpen it properly?" :D
@@WandereringFamily123 It seemed rather sharp to me. Am I missing something? The shave worked fine, and the tomato cuts were clean. Heirloom tomatoes are rather difficult to get thin neat slices of.
It slices! It dices! It makes Julienne fries!
@@jeffr0 And wait! There is more! It also stores easily under your bed! Don't wait, there are only a few left! Only $999.99! Call your local number NOW!
I think that knife is begging for a 15deg hollow ground bevel. I bet the tomato slicing would go much better.
This one was absolutely amazing
Please sign your work ,it is art !
How does anyone hate this guy or his channel? This show relaxes the hell out of me. He's an excellent craftsman.
I´m in love with this knive!
Have you ever thought about silver soldering the joint between the bolster and the blade? It would keep bacteria from growing in there. And it looks very cool. :) Enjoyed your video! :)
Nice fit up on this piece 👍
I think a lot of your stuff is great...but this....this one was spectacular.
That tiny tang breaks my heart. You did what you had to do but damn.
One more masterpiece was born from scrap. Thanks a lot!
Props to RSL, they can't make a good game, but they singlehandedly fund half my UA-cam experience XD
Well done👌🏼👌🏼 really creative
I would be the guy that took a hard pass on that knife at the market, never seeing it has potential. That turned out amazing.
They way you put your arm on the table after you've sharpened the blade is kinda scary :D
Also slightly triggering for people who self harm...😗
Wow. A piece of rusty metal restored to a knife I would never stop using. Fantastic .
Awesome work brother.
love the knife but seriously excited about the heirloom tomato.
It would be nice to know when is the right time to use a sandblaster vs rust remover...or can both be used in each case? If yes then would it not be faster and better to use sandblaster in the initial phase of the video?
Lovely work as always! Kudos from India.
That handle is amazing!!
Great cleaver, the patina looks beautiful
Are you telling me that Knife can cut a tomato? Outstanding.
I love the way you keep the patina and not make it to a perfect shiny knife like most channels do
Carbon steel
Carbon Steel
Carbon steel
I can barely wire a plug but I love watching these vids
This knife had an outstanding transformation
How much free time do you have on your hands?
"Yes"
YES
That was the last knife I used in the Titanic it's crazy how somebody found it
"It's been 84 years..."
That’s probably the best one can do without a sandblaster. Nice job.
That one mosquito in the middle of the night: *4:54*
New profile and finish look fantastic, although I’m concerned about the cuts you added into the tang. I know you added them to increase the strength of the anchoring to the handle, but it might also increase the chance for stress fractures to form near the cuts.
Leo Marrah, I wouldn’t worry about tomato cutting stress....
It could chop millions of tomatoes before the handle turns into sauce bruh...
I'm enjoying your videos.
Beautifully done
Very good job! 👍
that is the smallest, saddest tang i've ever seen in my life
Yeah I thought the same but I guess it isnt a combat knife so fair enough
My girlfriend 2020
Segio Siea lol rip
dangerously small
That's what she said
I cant even be arsed repairing a slightly bent spoon or fork then you have this G
Always so rad to see people breathe new life into old things, and give broken tools the ability to do their job again. Awesome video!
In the condition it was in, it would've probably been cheaper to make one out of a lawnmower blade. Lol
Hey Black Beard. Did you ever find out what the stamped imprint on the side of the blade was from? I saw a faint one at 19:20 and 19:55.
“Now that’s a knife”👏🏻👏🏻👏🏻👏🏻👍🏻
THIS IS SUPER COOL BRO
NICE VIDIO
13:55 waaaaw
Sex
That's hilarious.
Beautiful restoration. I was happy to see you scrubbed the rust away with a proper brush, not a toothbrush as I've seen on other channels. It drives me bonkers.
ben candelaria Ya right 👍🏻
That came out really beautiful! (And useful too!)
It literally shows the amount of quality of edging and sharpening that comes out in his craft.
Shaving arms and cutting paper is so 2019.... To REALLY prove how sharp it is, trim your toe nails. That will be avant garde.
Nope, gotta shave your pubes. 😵😄
Michael Myers called. He wants his knife back.
It is a great idea the way you fix the blade into the handle!
Is this guy incredible or what?? What skill.
You should never use gloves with wire wheels because your hand can get caught up in it and mess your hand up
This guy really likes to make a tomato salad.
إنني أتابعك من العراق..أستمر في عملك لأنك الأفضل..في نظري....تحياتي لك .
Beautiful restoration.
Raid Shadow Legends claims another victim...
bro how u gonna raid shadow legends me when im trying to chill watchin my no-dialogue workshop videos.
my man's gotta make his money right
I don’t even care anymore if my favorite channels display ads. You deserve the money. When will you show us the pieces My Mechanics did to you?
Top de mais irmão
Parabéns pelo talento
was this thing found stabbed inside of a bear or something?
Raid has claimed another youtuber :"(
With how Google is taking things, sponsorships are really the only way for creators to earn a decent amount of money. It’s a shame, but business is business I guess.
Outstanding craftsmanship.
Someone obviously once loved that knife enough to try and fix it multiple times. I'm sure they would have loved what you have done with it ❤️
That handle looks amazing, but I’ve never been a big fan of leaving the pitting from the rust on the blade.
looks cool but not wise for kitchen knives because the pits hold bacteria.
Man, doing Raid ads must pay pretty well, seeing how everyone universally knows it's shit, but every content creator on UA-cam still does the ads
Well with UA-cam deciding they want an ever increasing share of the add money, content providers are doing what they can to make ends meet. Pretty sure they enjoy making these inviđeo adds as much as we love watching them. Better than loosing content like this. But ya f¥ck Raid SL!
Raid shadow legends is actually pretty decent.
Beautiful work!!!!
You Sir are an absolute artist with these restores.
E' un ragazzo giovane, sa fare qualcosa.... Secondo me qui si parla di "eccellenza". Punto.
Concordo al 100%
Qualcuno sa dirmi in che cosa immerge il coltello al minuto 8:20 ?? Grazie
18:52 where did you get this Tomato from, Chernobyl?
Love the video
Handle is good. Nice job!
So this is what I find on quarantine
At first that thing had so much rust you could get tetanus from just looking at it
I think he had his tetanus protection goggles on :p
14:05
This scene approved by Ministry of Sexual Innuendo
Hentai
Excellent work👍👍👍. Thanks for sharing
Great job on the handle
I think that's the ugliest tomato i've ever seen
Heirloom tomato. They're ugly, but super tasty.
Excellent result 👍👍👍👏👏
Saudi Arabia 🇸🇦 🇸🇦✋🏽
lotta work and very special tools, but very well worth it, its gotta feel good bringing something back to life
Very nice . The Rocky Balboa Society of North America salutes you .
Exquisite. Great composite for the handle, made the whole thing look absolutely elegant.
yet another brilliant restoration👍😊
Amazing restoration 👏👏👏