I had a lot of autism clients that were super scared of my other clippers because of the noise but using these made them all calm down and get very comfortable.
Those JRL's are slept on. I keep two on my station. One with the taper blade & the other with the faper blade that JRL sells online. Compared to the new Instinct clipper I feel that they cut just as well with the faper blade without having the loud "hum" the Instinct's vector motor makes.
I think the issue with barbers not wanting to give clippers a chance is because with certain clippers like the JRL or cordless fastfeeds you have to tweak your system. JRL, cordless fast feeds, and babyliss fx clipper give me some of the best blends in a short amount of time but you have to flick. If you can't flick like crazy they might take you longer to use and might not produce the results you want.
Love your videos from France here. I'm applying your fading process on self cut since where I leave there ain't good barber. Thanks a lot for your content and help you give to everyone
ive never tried the jrl trimmers, but i LOVE my jrl 2020 clippers ...ive got one pair with a fade blade that i use for flat tops cause u can hold it like a pencil... & ive got a second pair with a wahl staggertooth magic cutting blade & jrl's taper fixed blade on em that i only use for fading... so far ive loved them both ...& theyre super quiet... & may i say, u always do such good work man, thank u
@seancutshair you should do a wahl cordless senior beastmode 2.0 with the fusion blade and tomb 45 upgrades! And i really love your videos as an up and coming barber i learn alot from your videos! thanks for the content you share bro!
Great review for those that don’t care about the clicking lever on jrl simply unscrew the lever and turn the clicking washer the other way around and you get a floating lever
I love the jrl but agree the blends aren't as good as other clippers I've used. I just love how quiet they are. I have some sensory issues that force me to switch to them just bc of that often 😅 I wish other companies would start to use that technology and make there stuff quiet also 🙏🏼
I feel you on the jrls, very nice Clipper can definitely get the job done but I could never get down with them. Probably my least used clippers but I do like it for beard work or detailing because of the taper blade
great video! Question: the JRL clipper (2020C) comes with a set of guards; can't figure out if those guards work with the trimmer (2020T) too? I'd really love the trimmer for the beard with a 6mm guard.
Nice content and thanks buddy I appreciate me winning the shortlist I just couldn’t afford the shipping and handling at that time I just passed my exam and my master barber license is on its way ❤it. Your awesome at making those jrl look good.Nice cut
Is the blade open on these really a big difference compare to a wahl or any other clipper? I’ve read that these open little more than your regular clipper. Does it affect the blending process do you take a different approach
@@Seancutshair not that I’m aware of no. After so long they need to make one. They also just need new clippers and trimmer in general just to have other models at least
@@Reborn95 I cut with the stock blade for about a week and it was just ok at best in my humble opinion and then I threw that Fusion blade on there and it’s almost night and day for me and they are still super quiet so it’s a win win in my book🤙🏾 I haven’t picked up my Rebels or Mythics at all since I got them a few weeks ago👀might be that new clipper syndrome though lol but I’m really really rocking with these JRLs
Will jrl drop a new clipper this year? Need a new clipper but cant decide between jrl and the boosted, im a Hobby Barber and cutting hair @ Home. What do you think? Great Video as always sean
Hey Sean, for my clippers right now I have a magic clip w the gamma faper blade attached j bought a senior and put on taper blade but dont think they any better then the magic clips thinking of returning the seniors and buying the JRLs what are ur thoughts?
Curious im a creature of habit.. I'll admit, I stick to my system with my tools and try not to stray from it..I am going to most likely pick up the instinct but I know the JRLS are top-tier looking forward to it 👍🏼 maybe do something on detachables brother just for the newer barbers? That might be interesting for some people.. they're versatile to always have in the arsenal. Maybe a dumb idea? but just putting it out there for some content 👍🏼
@@Seancutshair I get it brother honestly, I don't use mine much either.. they're good to have though in the arsenal.. and their corded still 😁😭.. shows how long I've been cutting and how far technology is come.. I love to be part of the klutch team man. My family needs a change I've been running a shop in Pittsburgh for quite a long time but sometimes it's time to move on and take a risk.. just has to be the right move. Anyway keep up the good work man you have a hell of a squad and you're first class man. 💪🏼🙏🏼💈❤️
That sound weird the cutting blade shouldn’t be anywhere close to scratching the skin. Maybe just take it apart and make sure everything is good. Put it back together and see if it’s any different. Sometimes they’re just slightly off
I had a lot of autism clients that were super scared of my other clippers because of the noise but using these made them all calm down and get very comfortable.
That’s interesting I feel like these would trigger a sensory overload. The buzz on these drive me crazy lol
Those JRL's are slept on. I keep two on my station. One with the taper blade & the other with the faper blade that JRL sells online. Compared to the new Instinct clipper I feel that they cut just as well with the faper blade without having the loud "hum" the Instinct's vector motor makes.
Yeah they’re definitely quiet
Bro i have the exact same setup, the jrl are lighter and quieter too
Put the faper blade and it was game changer when it comes to fading
@@monkessj469faper blade from style craft on the jrl ??
Love your Clipper & Trimmer review videos! Keep em coming bud!
Thanks! Will do!
I think the issue with barbers not wanting to give clippers a chance is because with certain clippers like the JRL or cordless fastfeeds you have to tweak your system. JRL, cordless fast feeds, and babyliss fx clipper give me some of the best blends in a short amount of time but you have to flick. If you can't flick like crazy they might take you longer to use and might not produce the results you want.
Yeah true! Well put
Love your videos from France here. I'm applying your fading process on self cut since where I leave there ain't good barber. Thanks a lot for your content and help you give to everyone
🙏🏼🙏🏼🙏🏼
Can't wait to watch the video already
🙌🏻🙌🏻🙌🏻
Good stuff! Solid blend as usual.
ive never tried the jrl trimmers, but i LOVE my jrl 2020 clippers ...ive got one pair with a fade blade that i use for flat tops cause u can hold it like a pencil... & ive got a second pair with a wahl staggertooth magic cutting blade & jrl's taper fixed blade on em that i only use for fading... so far ive loved them both ...& theyre super quiet...
& may i say, u always do such good work man, thank u
Nice 👌🏻 appreciate it
@seancutshair you should do a wahl cordless senior beastmode 2.0 with the fusion blade and tomb 45 upgrades! And i really love your videos as an up and coming barber i learn alot from your videos! thanks for the content you share bro!
I basically just did in my recent senior video!
Great review for those that don’t care about the clicking lever on jrl simply unscrew the lever and turn the clicking washer the other way around and you get a floating lever
👌🏻👌🏻👌🏻
I just got a pair of JRL and they are the best clippers I have ran yet!
Nice 👍🏻
I love the jrl but agree the blends aren't as good as other clippers I've used. I just love how quiet they are. I have some sensory issues that force me to switch to them just bc of that often 😅 I wish other companies would start to use that technology and make there stuff quiet also 🙏🏼
Yeah idk what makes it so quiet but other companies should definitely try it out
@Seancutshair I'm sayin man! We've got to much access to tech to not ask for better ha
My Arsenal is Wahl seniors and JRL clipper. Both are great. Jrl good for straight hair. I have a fade blade on the JRL
Nice 👍🏻
How do the jrl cut with the fade blade ?
For the jrl trimmer u have to use the silver blade it's thinner and hits waaay better
Gotcha 👌🏻
I feel you on the jrls, very nice Clipper can definitely get the job done but I could never get down with them. Probably my least used clippers but I do like it for beard work or detailing because of the taper blade
Totally agree but I was pleasantly surprised with them
Put other blades like wahl
@@saidzueke4782 I saw moefadetastic run the Faper blade on it, I’ll probably have to try that next
try it out with the fusion blade, so smooth and feels like a whole different clipper!
I’ll have to tell Phil to swap it out
Do you need any mods to switch to the fusion blade?
Sean the man
🙌🏻🙌🏻🙌🏻
Great video 👌🏽 - did you use the full power setting when using the clipper or the half power setting?
Yeah full power
6:26 my gamma alpha clippers makes the same noise when I’m closing the lever with the wahl 1 guard and the wahl half guard…
What should I do?
It rattles because the blade is touching the guard, this is due to your clipper blade being zero gapped a bit too close.
@@monkessj469 sucks to hear that man… I didn’t zero gapped them it was like that straight outta the box like that…
Yeah exactly just set a little close. Just loosen and scoot it back just a touch
@@Seancutshair appreciate it man🙏 keep going with the great content I’ve learned so much from your videos and got much better at cutting hair ❤️
great video!
Question: the JRL clipper (2020C) comes with a set of guards; can't figure out if those guards work with the trimmer (2020T) too? I'd really love the trimmer for the beard with a 6mm guard.
No they wouldn’t work for the trimmer. Not sure if the trimmer comes with it’s own guards some do
Nice content and thanks buddy I appreciate me winning the shortlist I just couldn’t afford the shipping and handling at that time I just passed my exam and my master barber license is on its way ❤it. Your awesome at making those jrl look good.Nice cut
Appreciate it! And that was a scammer don’t fall for any messages like that. If it doesn’t say Seancutshair only it’s not me
Can’t wait!
Is the blade open on these really a big difference compare to a wahl or any other clipper? I’ve read that these open little more than your regular clipper. Does it affect the blending process do you take a different approach
Were you a LS ? You got the cross keys on your vest
No it’s a pin that a barber put out a few years ago
JRL with the fusion blade is 🔥🔥🔥🔥🔥🔥🔥🔥
Or wahl blades💪🏽
👌🏻👌🏻👌🏻
Does jrl make a fusion blade? Or is that a style craft blade
@@jDot2414 style craft
I have the JRL with the wahl fade blade :) and works great.
Right on
Imagine JRL coming out with a quiet shaver 🔥🔥🔥
they said they gonna drop a new shaver in this year they workin on it
Do they make one at all?
@@Seancutshair no they don’t . Not yet
@@Seancutshair not that I’m aware of no. After so long they need to make one. They also just need new clippers and trimmer in general just to have other models at least
They are
I threw the fusion blade on my JRLs and it was a complete game changer!!!
Did you keep the stock cutting blade on it or did you change it too? And did it affect the sound? Might have to give that a try 🧐
@@Reborn95 I cut with the stock blade for about a week and it was just ok at best in my humble opinion and then I threw that Fusion blade on there and it’s almost night and day for me and they are still super quiet so it’s a win win in my book🤙🏾 I haven’t picked up my Rebels or Mythics at all since I got them a few weeks ago👀might be that new clipper syndrome though lol but I’m really really rocking with these JRLs
Nice 👍🏻
@@WaveyCuts87 where did you get a fusion blade for the jrls?
Bro jrl cut the best don't ignore that. BTW i enjoy your videos
They did cut nice just can’t do the shape
They have own attachments or can you fit wahl ones on them?
Yes and yes!
I use a babyliss graphite taper blade for my beard which doesn’t quite hit certain areas. Any suggestions ? fade blade or different blade
Yeah may try a different blade or maybe just adjust them a little
Blend is ⛽⛽⛽⛽. I love my JRLs btw lol
🙏🏼🙏🏼🙏🏼
jrl 1 st the best , 2 gamma x ergo , 3 - senior 4 gamma boosted / babyllis boost plus
👌🏻👌🏻👌🏻
Is there anyway to make these JRLs into a half system? I just don’t like how wide they open, and the taper blade it came with is 🗑️ too.
I’m not sure what you mean by half system.
@@Seancutshair My bad. I mean, is there any way to get them to open less to where they open up to a half like the Wahls?
I take way way too long on my haircuts coming blurry with the JRL, definitely my least used. Love the content as always brother
Appreciate that
They did a pretty good blend.. Wahl still has the smoothest blend in my opinion.
👌🏻👌🏻👌🏻
Which clipper of Wahl?
Magic Clip
Will jrl drop a new clipper this year? Need a new clipper but cant decide between jrl and the boosted, im a Hobby Barber and cutting hair @ Home. What do you think?
Great Video as always sean
Haven’t heard much from JRL in a while. The boosted is definitely my favorite so can’t go wrong there
Hey Sean, for my clippers right now I have a magic clip w the gamma faper blade attached j bought a senior and put on taper blade but dont think they any better then the magic clips thinking of returning the seniors and buying the JRLs what are ur thoughts?
Senior is definitely the best out of the bunch. I’d just try the faper on it. But at the end of the day it’s just your preference
@@Seancutshair how about gamma x ergo, is it close to boosted?
Thanks
Curious im a creature of habit.. I'll admit, I stick to my system with my tools and try not to stray from it..I am going to most likely pick up the instinct but I know the JRLS are top-tier looking forward to it 👍🏼 maybe do something on detachables brother just for the newer barbers? That might be interesting for some people.. they're versatile to always have in the arsenal. Maybe a dumb idea? but just putting it out there for some content 👍🏼
I might. I totally got rid of detachables though so I’d have to borrow one!
@@Seancutshair I get it brother honestly, I don't use mine much either.. they're good to have though in the arsenal.. and their corded still 😁😭.. shows how long I've been cutting and how far technology is come.. I love to be part of the klutch team man. My family needs a change I've been running a shop in Pittsburgh for quite a long time but sometimes it's time to move on and take a risk.. just has to be the right move. Anyway keep up the good work man you have a hell of a squad and you're first class man. 💪🏼🙏🏼💈❤️
by any chance does the trimmer for the jrl charges with the babyliss charger?
I’m not sure
how are u adjusting ur work with the extended lever that the jrl has
I’m used to using extended levers so it fits right in
@@Seancutshairwhen cutting hair with a clipper that has an extended lever, do i use the same fading steps as i would do with a regular clipper ?
@@danimelvin3091 I do. It’s just going to extend the range of each step slightly
Serious question good app to edit thumbnails?
I have a thumbnail video check it out
Hey man new to the channel, what guards do you use? Keep up the great content! 👍
MartyBlendz premium translucent guards. I have a new video coming out soon 👌🏻
@@Seancutshair thanks! Looking forward to it 🤝
where are those guards from
Martyblendz.com
@@Seancutshair thanks my bro!!
my JRL clipper while lining up the beard it scratches the skin even half way open ?
That sound weird the cutting blade shouldn’t be anywhere close to scratching the skin. Maybe just take it apart and make sure everything is good. Put it back together and see if it’s any different. Sometimes they’re just slightly off
What color Guards are those let me know
MartyBlendz skittles
wahl magic clip or jrl??
Jrl
Can someone give me the contact of which distributor. I want to buy these machines for my barbershop
Try fwbarbersupply.com
The wahl premium guards from wahl definitely don’t make a sound in the JRL
Noted ✅
Should I buy a jrl clipper and trimmer set for 315 cad
That’s solid!
الكاميرا
I am from Algeria and I hope to work as a barber for you in Canada
It was funny to see how loud the trimmers were with the Gold FX blade. I put that blade on my VGR trimmer and it's loud as hell. Haha.
Yeah I feel like any time you start swapping stuff it immediately gets louder
очень круто)спасибо за видос )красава!!!!
Welcome!
Super jrl❤❤
🙌🏻🙌🏻🙌🏻
Im going to buy thesw
👌🏻👌🏻👌🏻
Luar biasa..bagus sekali bossku..👍
🙏🏼🙏🏼🙏🏼
I like to live life on the edge so I use a fade blade. 🤣 Nah but really I want to try the faper blade on my seniors.
Do it!
🙏🏼
Tara Prairie
Put the andis gtx blade on it. No mod needed! Thank me later
Might be solid 👌🏻
JRL get a good fade haircut
👊🏼👊🏼👊🏼
JRL Clippers are the best I've used in 30yrs 😊🔥💈🔥💈🔥💈
👌🏻👌🏻👌🏻
Ок👍
👊🏼👊🏼👊🏼
Teknik cukur gradasi butuh kejelian dan langkah2 yg lumayan banyak tingkatan
Yes it does!
Jrl trimmer is a big No no
Why ?
Phill ass to upload on his channel frfr
He done for 🤦🏻♂️
Good tools but bad haircut
Well thanks 🤦🏻♂️
Just bought these. Hopefully they grow on me .
They’re solid. Not my favorite but they’re good clippers
The blade don’t matter in my opinion. It’s just hype
I wouldn’t say it’s hype. Blades are different and cut different but you can get it done with any of them