ya I removed the damper oil as well when it was not necessary now have to re bleed it. only the seals needed to be changed. that damper takes a lot of effort to take the air out. gladly I did not remove the other damper. hope it goes well for u.
Love your videos you really take the time to break down what your doing and give the little tips or tricks that can mean alot for someone that hasn't done something like this
Great video. I'll add that it's a good idea to normalize, or relax, an o-ring after it's installed. With a small screwdriver or pick just place it under the o-ring and lift it out of the groove as if you were going to remove it. Then just roll the screwdriver or pick around the circumference of the groove to allow the o-ring to "unwind" and sit in a relaxed position. Also, the oil will wick up cardboard so the level is best checked with something a little more non-porous to get an accurate measurement.
Good video. I just did mine and used 1000, 1500, then 2,000 grit paper (wet with fork oil) to smooth out the lower fork tube. Worked well. I really like the cardboard trick, I'm stealing it. Thanks Cameron.
Great tutorial man...i like how you have alternatives for special tools which not everyone can get and you explain the steps perfectly... thanks man this really helps me with my CR250
An absolute clinic on fork rebuilding...! 🤘 Great info, great procedure and great camera work... Nice pace as well... Way to give people confidence to try on their own...! GREAT WORK BRO...!
I'm sure this video will a great resource when the time comes to put seals in the forks on my SuMo. Your videos have already been helpful as I have put a 1977 IT400 back in order. It's forks were a heck of a lot easier then the ones in this video! I did have to make a special tool to get them apart though.
Excellent video sir! I love your passion for clean, neat work. The results speak for themselves. This video has helped me conquer rebuilding the forks on my ‘06 CRF 250R. Honestly, I probably wouldn’t have attempted the job if it hadn’t been for your efforts. Cheers!
Hey Cameron I just want to say thanks for the cr250 videos. I'm in the process of rebuilding my '01 and I've been watching your videos. After hitting some 100ft jumps last week my forks are dripping puddles after sitting for a week, so I ordered the exact hardware as you so I can watch your video and attempt to get the job done right and rip in the Oklahoma hare scramble in April . So thanks for the content man. These videos will come to good use through the season as I rebuild and replace!
Gosh, it hurt me to see you working without gloves, especially after what you went through. Then I realized this was shot before that :) Great vid as always Cam.
Thanks so much for your fork videos. I really appreciate it man. I bought a Ducati P V4 with a bent fork so know I can repair it myself. Thanks again!!
why didn’t you put the final bushing of the first fork on first? wouldn’t that eliminate the need for the fork cap during the process? unless it is not flush with the fork itself....
Watching these suspension videos is definitely making me reconsider sending my forks and shock off to a local tuner here in California to get a re-valve . All the local guys around here got some high price tags though ...considering I get my correct shim stack and springs for my weight I’m considering doing the rest of the assembly..I’m curious if the results will be close to some of these suspension gurus around here
Confirmed my suspicion, I have no business doing this on my own. I will stick to air filters, oil changes, and if I’m feeling daring, swapping out a clutch. No way I’m trying this! Great video, though, really enjoyed it!!
Hello Cameron !, I am a loyal follower of yours and a big fan of the restorations you do to motorcycles, I have a query about the fork shock absorber, I am changing the fork seal and when installing the fork cover assembly fork and adjust it, when I pump the shock absorber rod nothing returns and a part of the oil leaks through its two upper drainage holes, not if it is because of the O-rings and the Teflon bushings that it carries, I would infinitely appreciate if you can give me information about my case and that could be greetings!
Cameron thank you for sharing your knowledge and giving us the viewers The step by step procedures To keep our machines in tip top shape I am in the process of a full 85 Tri Z Build from the frame up I am going to attempt a full fork rebuild For the first time Is their a difference in telescopic forks Compared to the inverted I look forward to the challenge Once again thank you for all your hard work Invested in these videos They are full of valuable information That will stay with me God bless Cameron
Very organized and informative content. I’m working on a project similar to your CR250. Mine is a 06 CRF450 supermoto. Only recently subbed but every search I ended up on your videos. Keep up the good work
Great video. I have a question: what do you do if the damper is leaking? I have a 1994 RM 250 Suzuki and it seems that there is a seal somewhere inside but I don’t think it’s accessible do you have any suggestions?
Hi I'm John Paul from Philippines and I love all of your videos. I have a 2015 RACAL 150 and was wondering if you have any ideas to restoration of this Chinese motorcycle enduro. ❤❤
Everyone I've seen do this and the manual shows measuring from the top down. And if you buy the Stockton measure rod and syringe same you measure from top down are you doing something different on purpose? Just on the inner cartridge everything else is spot on I'm almost 99% positive inner cartridge should be pretty much completely full . Good video.
A better way to remove the damper bushing rather than buggering it up with a screw driver is to use circlip pliers. Initially a screwdriver or the like may be required to gain a bit more space to fit in the pliers. But once they are in, they will pry the ring open neatly since there won't be any sharp metal rubbing against the ring. Another option that is trickier and requires more hands is to use dental floss (especially the tape type). With a bit of fiddling, the floss can be worked inside the ring. Add a loop of floss to each side of the ring. If the split is 12 o'clock, the loops should be about 2 and 10; in some tougher jobs, adding a loop at 6 o'clock may be useful. Also, depending on how tight the ring is, several loops may be required to avoid breaking the floss. Remember, some of us have no choice but to reuse parts ;-)
Hi, Thanks a lot for the video, it helped very much! question, as shown at minute 14, the damper rod on one of mine will not return, i took it apart and re did it, still the same, any advice where to start??
Quick tip for next time. run some aluminum oxide 220 sand paper on the fork tubes and create a cross hatch. It will take down any nics and helps reduce stiction from the seals. As for the damping rod, use some fine scotch bright pad with oil to smooth out the surface. It will be as smooth as a whistle.
Hey great video. Can you please guide me or tell me a website name from where i can order the top fork cap,damping rod and some other stuff too. I would really appreciate your help. The last guy who had the bike damaged it and the suspension is not working so needsome help with it.
What video should I do next?
Cameron Niemela Riding video, the 125 needs some attention!!
Engine build gets my vote! Quality video as always Cameron
Engine
Since we are on Suspension, you might as well do the rear shock before you move onto other things.
Motor
Rest in peace brotha, your videos have helped me through a lot.
My first fork rebuild went unusually smooth thanks to you. I can't thank you enough!
I’m just rebuilding my rm125 forks and you can not imagine how much this helped me, thank you so much
im a simple man when i see Cameron post a new video i click and i enjoy.
If your bad at remembering how they assemble, only do one shock at a time.
I already fucked up. it's why I'm here.
Good idea.
And take pictures.
ya I removed the damper oil as well when it was not necessary now have to re bleed it. only the seals needed to be changed. that damper takes a lot of effort to take the air out. gladly I did not remove the other damper. hope it goes well for u.
I just finished my set after watching the video. Thanks Cameron!
Nice tutorial man. I like how you're very organized
Love your videos you really take the time to break down what your doing and give the little tips or tricks that can mean alot for someone that hasn't done something like this
Great video.
I'll add that it's a good idea to normalize, or relax, an o-ring after it's installed. With a small screwdriver or pick just place it under the o-ring and lift it out of the groove as if you were going to remove it. Then just roll the screwdriver or pick around the circumference of the groove to allow the o-ring to "unwind" and sit in a relaxed position.
Also, the oil will wick up cardboard so the level is best checked with something a little more non-porous to get an accurate measurement.
The quality of your videos is amazing!🤙 The cr is going to look so fresh🔥
Followed your advice to the T and was able to bleed out finally. Thanks man!
I like the idea of matching them up in order it really makes things easier in making sure things go back in order
You’ll be missed buddy 🤘🏼 always good watching you! Ride in peace brotha!!
This is AWESOME! I’m rebuilding my cr250 and I have never done forks before, this helped a lot.
Good video. I just did mine and used 1000, 1500, then 2,000 grit paper (wet with fork oil) to smooth out the lower fork tube. Worked well. I really like the cardboard trick, I'm stealing it. Thanks Cameron.
Great tutorial man...i like how you have alternatives for special tools which not everyone can get and you explain the steps perfectly... thanks man this really helps me with my CR250
Awesome video! I had no idea how many parts were involved with the forks. Thanks for sharing your knowledge with us all!!
I love that your videos are so professional and clean on builds and teardowns, but yet you still show that you dont need that $80 tool!
You know this like an original factory mechanic!
An absolute clinic on fork rebuilding...! 🤘 Great info, great procedure and great camera work... Nice pace as well... Way to give people confidence to try on their own...! GREAT WORK BRO...!
Really really big thanks to you. i changed the seals to my forks and the job come out great with these instructions
Your videos are awesome. So clear and well thought out. I really appreciate your level of detail.
Excellent Tutorial man!!
Nice how you show the disassemble and assemble process !!small details and tricks are very important. Thanks!!
Another master piece! You make it look sooo easy. Thanks for sharing
I can’t get enough of your videos!!!!!
I'm sure this video will a great resource when the time comes to put seals in the forks on my SuMo. Your videos have already been helpful as I have put a 1977 IT400 back in order. It's forks were a heck of a lot easier then the ones in this video! I did have to make a special tool to get them apart though.
Best Dirt Bike Videos on all of utube bro... hope yr feeling better
A much better video than the one 7 years ago definitely improved
Insanly helpful video 10 times better then all the other fork rebuild videos out there thanks
Loving these 250 videos!!! KEEP THEM COMING!!!!!
Very good video for someone who has never done this before
Excellent video sir! I love your passion for clean, neat work. The results speak for themselves. This video has helped me conquer rebuilding the forks on my ‘06 CRF 250R. Honestly, I probably wouldn’t have attempted the job if it hadn’t been for your efforts. Cheers!
Hey Cameron I just want to say thanks for the cr250 videos. I'm in the process of rebuilding my '01 and I've been watching your videos. After hitting some 100ft jumps last week my forks are dripping puddles after sitting for a week, so I ordered the exact hardware as you so I can watch your video and attempt to get the job done right and rip in the Oklahoma hare scramble in April . So thanks for the content man. These videos will come to good use through the season as I rebuild and replace!
Gosh, it hurt me to see you working without gloves, especially after what you went through. Then I realized this was shot before that :) Great vid as always Cam.
Thanks so much for your fork videos. I really appreciate it man. I bought a Ducati P V4 with a bent fork so know I can repair it myself. Thanks again!!
The best video so far and I watched a lot of videos. Thank you.
why didn’t you put the final bushing of the first fork on first? wouldn’t that eliminate the need for the fork cap during the process? unless it is not flush with the fork itself....
Actually genius
This is a well made video about an important skill.
You really did make that look so easy and smooth, thank you man. Subscribed.
Another classic from ReviveMoto. Priceless info as always Cameron thank you 🙏👍🏻
Thumbs up for the PVC seal driver tool!!!
Watching these suspension videos is definitely making me reconsider sending my forks and shock off to a local tuner here in California to get a re-valve . All the local guys around here got some high price tags though ...considering I get my correct shim stack and springs for my weight I’m considering doing the rest of the assembly..I’m curious if the results will be close to some of these suspension gurus around here
Confirmed my suspicion, I have no business doing this on my own. I will stick to air filters, oil changes, and if I’m feeling daring, swapping out a clutch. No way I’m trying this! Great video, though, really enjoyed it!!
Dude once you do it the concept is really simple !!
Idk why so many people act like this is rocket science honestly @@idc.letsbikex853
You got it man I’m about to try it for the first time aswell
u make it look so ez it makes me believe i got this ty man
Awesome! Been waiting decades for you to do This one! Thank you, it was worth the wait....
Thanks to you willing to share your extensive knowledge with others I've successfully rebuilt my 96 rm125 forks...chuffed as, thank you 😊
You’re the best, You make it look easy.
Another great video you are smart and a great teacher.
"Looks like there's some dirt underneath the clip there"
I swear I could hear the panic in your voice 😱 😉
Hahaha
This helped a lot I like the creative way you do things!
Always looking back too your videos great job man
Hello Cameron !, I am a loyal follower of yours and a big fan of the restorations you do to motorcycles, I have a query about the fork shock absorber, I am changing the fork seal and when installing the fork cover assembly fork and adjust it, when I pump the shock absorber rod nothing returns and a part of the oil leaks through its two upper drainage holes, not if it is because of the O-rings and the Teflon bushings that it carries, I would infinitely appreciate if you can give me information about my case and that could be greetings!
Cameron thank you for sharing your knowledge and giving us the viewers
The step by step procedures
To keep our machines in tip top shape
I am in the process of a full 85 Tri Z
Build from the frame up
I am going to attempt a full fork rebuild
For the first time
Is their a difference in telescopic forks
Compared to the inverted
I look forward to the challenge
Once again thank you for all your hard work
Invested in these videos
They are full of valuable information
That will stay with me
God bless Cameron
Very organized and informative content. I’m working on a project similar to your CR250. Mine is a 06 CRF450 supermoto. Only recently subbed but every search I ended up on your videos. Keep up the good work
thanks for showing how to take the forks apart
Great video!!! Very organized and detailed!!
Great video. I have a question: what do you do if the damper is leaking? I have a 1994 RM 250 Suzuki and it seems that there is a seal somewhere inside but I don’t think it’s accessible do you have any suggestions?
Awesome video, thanks. We're going to try doing our own trackside
I like how you use common tools! Awesome
Hi I'm John Paul from Philippines and I love all of your videos. I have a 2015 RACAL 150 and was wondering if you have any ideas to restoration of this Chinese motorcycle enduro. ❤❤
that oil seal looks mangled at 10:06 any leaks after?
Everyone I've seen do this and the manual shows measuring from the top down. And if you buy the Stockton measure rod and syringe same you measure from top down are you doing something different on purpose? Just on the inner cartridge everything else is spot on I'm almost 99% positive inner cartridge should be pretty much completely full . Good video.
Much thanks for another excellent, informative video!
A better way to remove the damper bushing rather than buggering it up with a screw driver is to use circlip pliers. Initially a screwdriver or the like may be required to gain a bit more space to fit in the pliers. But once they are in, they will pry the ring open neatly since there won't be any sharp metal rubbing against the ring.
Another option that is trickier and requires more hands is to use dental floss (especially the tape type). With a bit of fiddling, the floss can be worked inside the ring. Add a loop of floss to each side of the ring. If the split is 12 o'clock, the loops should be about 2 and 10; in some tougher jobs, adding a loop at 6 o'clock may be useful. Also, depending on how tight the ring is, several loops may be required to avoid breaking the floss.
Remember, some of us have no choice but to reuse parts ;-)
Another great video mate.
Maybe a part 2, tuning and setup of the forks?
Thanks bro
You really know what your doing, awesome man
Always thought there was more work to it, pretty straight forward too.
I wonder if this process will apply in rebuilding the forks on a cr85??
I wonder if you googled it
I like your video..very details and easy to understand...can't you make some video how to paint light yellow at your absorber..
Nice video man. Can u tell whats that ring at 6:24 for? I lost one and i dont know if that really matters at all... Thanks!!
Great job Cam.
Hi, Thanks a lot for the video, it helped very much! question, as shown at minute 14, the damper rod on one of mine will not return, i took it apart and re did it, still the same, any advice where to start??
Also note. I replaced the damper assembly tube. But haven’t opened up the valve or shims at all. Thank you!
Quick tip for next time. run some aluminum oxide 220 sand paper on the fork tubes and create a cross hatch. It will take down any nics and helps reduce stiction from the seals. As for the damping rod, use some fine scotch bright pad with oil to smooth out the surface. It will be as smooth as a whistle.
Great job on explaining everything.
Thanks for shearing. Great videos! I have start doing a lot of stuff on my bike watcing your videos. Thanks! 🙂
This is great to help me with my bike. All I need is to find the amount of fluid and the correct rebuild kit for my bike
Dennis kirk has alot of great kits
Was one full bottle enough oil for both the forks?
Man you look about 15!!! Love the videos keep up the great work. A fan from the UK :-)
what is the name of the protector for inserting the seal in minutes 3:13 ?
So the outer fork tube bushing was set in place by the oil seal when you drove it in. Is that correct?
Your videos are amazing and have helped me out so much and I am glad you are doing better hopefully many more videos to come thank you so much
Thanks for the great vids... how much does rmz 250 2006 takes oil? Thanks
This is not Google. Can it
I have some white looking build up on the fork housings. How can I clean it off without taking off the gold or having to take off the entire forks?
Hello should you always replace the bushes? Im replacing leaky oil seals but didn't realise that I should put new bushes in too!
Does the rebound on the damper need to be fully hard while I’m bleeding it or does it not matter? Cheers
Is it the same process for the KYB forks? I got a small leak on one of my forks and I'm just going to rebuild them since I already have all the parts!
Yes, the process is very similar for a KYB fork
@@CameronNiemela thanks
how do you fix "that's gonna need some attention" @ 14:22
Great work buds !!
So what do I do if there's oil on the shaft 14:30?
Tyler monogan gave you a shout out
Is it okay to buff out the innertube if it has scratches?
Your videos are always entertaining👍🏻
Question.
Why would someone replace the springs in the forks? Is it necessary to do ?
Wonderful job! Thanks for the video it will help me with my forks
Will you be keeping the stock carb on doing a Kehin swap or possibly lectron?
Still figuring that one out!
would love you to do this with a xl600r. do they make a rebuild hit for those old bikes? I have an 86 I am restoring.
Do you have a video of how to take apart the whole fork. Don’t wanna make a mistake
Good tip I saw on another video, is use old seal to press on onto new one
Hey great video.
Can you please guide me or tell me a website name from where i can order the top fork cap,damping rod and some other stuff too. I would really appreciate your help. The last guy who had the bike damaged it and the suspension is not working so needsome help with it.