Bardzo pomocny film. Miałem problem z moim autem, wyraźny spadek mocy, komunikat check engine. Komputer pokazał błąd EGR. Dzięki Twojemu filmowi zdemontowałem zawór, był kompletnie zapchany. Po wyczyszczeniu śmiga jak dawniej! Dziękuję bardzo i pozdrawiam 😊❤
Magic, just about to do that to my 2009 T31, has slight vibration at idle so going to try the simple stuff first before digging deeper, already cleaned out turbo solenoid and MAF sensor (car runs much better after that), hoping cleaning out EGR does the trick re vibration, now I know how easy it is to remove it. Thanks for taking the time to do the instructional video.
Happy to help. Hope you get the vibration sorted out! Have the timing chain been changed? I hear it's a good idea after 200k km on the clock. Not sure if it will create any vibration, but you might get some ticking noise. Anyways, good luck to you mate!
@@cygarage timing chain and upgrade kit, sprockets, guides, tensioner crankshaft pulley, all changed 3 years ago. I thinks it lower engine mount or injector 3 causing vibration flow chart showing slight uneven fuel trim on live data. But will clean out EGR first and see if any difference. Cheers.
Thanks for this video, I've been struggling to get mine off, think this will definitely help. Unsure on how you managed to get the underside bolt undone on the EGR valve (one for the last bolts to undo) any tips on reaching round to get that bolt undone?
You have to move that pipe out the way to get average access to that bottom bolt, it's hard but I managed to get a thin spanner in there and break the bolt, then I found it easier to twist it with my fingers
A few things can cause a knocking sound. I need some more information to give you any useful tips. Is it only when the engine is cold? Are you sure it's coming from the engine? Whats the mileage on the car? If the mileage is high I would definately change the timing chain. That might make a knocking sound because it's getting a bit slack over time.
Looking for a new or seccond hand EGR valve? ebay.us/6nwVXN
Thanks a lot! Camera work was really thoughtful, one of the best mechanic video I've seen. Cleaning the EGR will be my summer project.
Bardzo pomocny film. Miałem problem z moim autem, wyraźny spadek mocy, komunikat check engine. Komputer pokazał błąd EGR. Dzięki Twojemu filmowi zdemontowałem zawór, był kompletnie zapchany. Po wyczyszczeniu śmiga jak dawniej! Dziękuję bardzo i pozdrawiam 😊❤
Hey man I just want to say thanks I used your video to take off my EGR valve and put it back on so thank you!!
Glad I could help 😊🙏
Magic, just about to do that to my 2009 T31, has slight vibration at idle so going to try the simple stuff first before digging deeper, already cleaned out turbo solenoid and MAF sensor (car runs much better after that), hoping cleaning out EGR does the trick re vibration, now I know how easy it is to remove it. Thanks for taking the time to do the instructional video.
Happy to help. Hope you get the vibration sorted out! Have the timing chain been changed? I hear it's a good idea after 200k km on the clock. Not sure if it will create any vibration, but you might get some ticking noise. Anyways, good luck to you mate!
@@cygarage timing chain and upgrade kit, sprockets, guides, tensioner crankshaft pulley, all changed 3 years ago. I thinks it lower engine mount or injector 3 causing vibration flow chart showing slight uneven fuel trim on live data. But will clean out EGR first and see if any difference. Cheers.
How did you go after cleaning EGR?
Great video just watched this and then did mine fixed the problem thank you for this sir
Thanks for this video, I've been struggling to get mine off, think this will definitely help. Unsure on how you managed to get the underside bolt undone on the EGR valve (one for the last bolts to undo) any tips on reaching round to get that bolt undone?
Yes keen to know also.
You have to move that pipe out the way to get average access to that bottom bolt, it's hard but I managed to get a thin spanner in there and break the bolt, then I found it easier to twist it with my fingers
Thx bro i needed that next Saturday i will fix it 😁
Glad I could help 😊 good luck!
So i removed cleaned and set back but not helped still i have code p0409-0488 if im correct its egr valve and i should buy new one 🤔
Did you end up getting new one and did it fixed it?
@@yeryangchang5000 tomorrow i should get right parts so at weekend i will fix then i will update
Hi, Changed teh EGR valve but still knocking sound - any thoughts? The knocking is louder and faster when acclerated No smoke at exhaust
A few things can cause a knocking sound. I need some more information to give you any useful tips. Is it only when the engine is cold? Are you sure it's coming from the engine? Whats the mileage on the car? If the mileage is high I would definately change the timing chain. That might make a knocking sound because it's getting a bit slack over time.
@@cygarage Hi, it was the rod end bearings so had to scrap the car😪
Oh no, that's too bad :( what car did you get after? I assume you got a new car
@@cygarage I'm using our second car for now A jaguar X type
Which engine is that?
2.0 dCi 😊