Installing and Using Hinges: Woodworking Beginners #19
Вставка
- Опубліковано 4 бер 2015
- In this video I review Installing and Using different types of hinges.
Easily the most common hinge in the world is the Butt Hinge, and it comes in many variations, sizes, materials and coatings. In this video we look at a variety of types of hinges and give some tips and suggestions on how best to install them.
******************
Beginners Woodworking Series #1 to #10: • Woodworking for Beginn...
Beginners Woodworking Series #11 to #20: • Woodworking for Beginn...
Beginners Woodworking #21 to #30: • Woodworking for Beginn...
******************
** Read Full Article Installing and Using Hinges - goo.gl/VjEsU0
** Like me at Facebook: / woodworkweb
** Follow me on Twitter: / woodworkweb
** Join me on woodworkweb: www.woodworkweb.com
** Connect with me on Google+: goo.gl/7fotJq
**** Subscribe here - / knecht105 - Навчання та стиль
This was so amazingly helpful! I'm a beginner in both carpentry and diy so just trying to even understand the basics can be hard because people assume you already know.
I'm trying to build just a coop but I'm using it as a practice for pretty much every skill related to it. I'm sanding, staining, building doors, using trim to hide the end of the hardware cloth, etc. I'm hoping to later use the skills to build my own customized furniture.
You continue to be my “go to” source for this kind of info Colin. Thank you so much!
Thanks Colin. I'm just learning how to install slides and hinges. Your tips will be very helpful.
Great explanation for this Colin - I really like the veneer shim idea.
The ShavingWood Workshop Thanks Tommy, appreciate the comments
Something that should be simple, but to a newbie woodworker this information is so valuable! Thank you!
I remember helping my dad hang doors. He chiseled the recesses perfectly. Marked everything with his pocket knife. Pocket knife, pencil, chisels and planes were always sharp. Used a yankee drill for the screw holes. Drilled for door knobs with a brace and bit. It was great and I miss those days! Anytime he or I needed a marking guage type thing, we just made one.
Gee Dubb Thanks for comment, I love hearing stories like this of craftsmen working at their trade ... thanks for sharing your memories
Some great advice on here as usual thank you very much I have struggled with hinges on a few occasions being a basic DIY have a go so this will help such a lot
COlin, you are a great source of knowledge and inspiration to me, a novice, an amatuer wood worker. Thank you Sir for your posts. Greetings from New Zealand. Stay safe and healthy
Thank you, this was extremely helpful.
Thank you so much for this informative video. it answered exactly the questions I had about which hinges to buy. It's quite confusing to someone not familiar with all the different ways a door can be mounted. You made it crystal clear. Thanks so much!
Very informative. Thank you for making this!
Very useful, Liked how you dragged the chisel back to find the notch.
Thank you
Thanks Colin, very informative.
Thanks! I needed info on how to install butterfly hinges. I didn't know about the centering bits--cool!
Thanks, Colin, that was your most helpful video yet.
A excellent topic Colin. This is one of the make or break issues whenever a lid or door is to be put in place. Mess this up and it can really effect the final outcome of our projects. An excellent video Amigo.
Derek
GiddyUp994 Thanks Derek, yes I have had a number of emails and comments about hinges lately from subscribers so thought it was a good opportunity to take about them ...
At the risk of being called out for constantly repeating myself; I learned a lot from this video. I learn so much from watching your channel.
Wonderful video, exactly what i was looking for!
I was very confused about putting up any sort of hinges, and that was what made me fear starting up the woodworking hobby.
Thank you.
Colin is brilliant , explains everything so well 👍
Thank You!
Wonderful explanations. Thank you.
Thank you. Great demo!
Yah...this arrived just in time. I'll be installing butt hinges in a hidden door I'm making soon. If only you had a video on that. Anyway, another great instructional video. I feel like a have a woodworking mentor in you and your videos.
I'm glad I have you to turn to when I'm doing something new. Thanks!
Colin, another great video. I watch all your videos and always learn something new. Thanks Colin.
Colin from Northern Ireland
colin farrier Thanks Colin, always great to hear from you
Thank you so much for sharing I really had a hard time finding a video that explains the way you do. 😃🌻
My surface hinges are old as is the cabinet that they came off of. I'm having trouble putting them back on because they have been off for months. So according to your video, I should put the hinge on the door first, then the wood wall. And I found small slivers of wood under some of the hinges,I guess it was for proper fit? My home is over 100 years old I've learned many things on the old cabinet work.
I love your beginners videos, they are very useful.
Luciano BSQ Thanks for the feedback, appreciate you taking a moment to give it
A couple of tricks and great info, thanks!
Brian Kristensen Thanks Brian
Such a great explanation. You are amazing!
Good job, thank you.
Thanks for this great video. I need to hang butt hinges in two different ways for two different uses. I have never worked with hinges before and your video has given me the confidence to go ahead and try. PS: your video was not too long.
+Sue Mel1 Perfect ... glad this was helpful
I really liked it, thank you very much for the video once aging for taking time to helps us out.
Ajith Kumar Hey, thanks buddy :)
I'm struggling to install triangle gate hinges for a recording booth. I want it to open the door in and out, which is why I'm using the gate hinges. I seem to always put it on crooked. I have little room to work. This video helps me get a better idea about how hinges should work, as I'm new to carpentry!
Excellent explanation, thank you for sharing your knowledge.
Francisco Corona Thanks Francisco
03441796134
Thank you so much for taking the time to educate so effectively.
olivepressdesign No problem, thank you for taking a moment to comment
Thank you for this video
You are welcome!
Thank you very much!
Thank you for this excellent video.
maravilho aprende bastante, obrigado!!!
lucas regis cardoso Thank you Lucas
Thank you! :)
Thank you for the video, i ignored most of the useful thinks you told in this video and my mirror door will now get a good treatment after learning form you,
Ajith Kumar Excellent, thanks again for your comments
This is very helpful. I dread hinges, can never get them right. This has helped a lot.
Thanks for watching!
Thank you!
realy thankyou
great explan
Thank you Colin
Thank you very much. This video was very helpful.
Good info Colin
Backyard Woodworking Thanks Roland
Great video Colin
RCvolo Thanks RC
Hi there I am installing a door that sits on the outside of my panel and the opening drops down as its a cabin. What is the best hinge? I bought the butterfly hinge!! Thanks
Thank you good info.
Delmar829 Thanks Delmar
My hinges are butt hinges for one set of doors and butterfly or surface hinges for the other set of doors.
good video. im making a storage bench, but only half of the bench will open up. bad thing is, i dont want the hinge to be there as u sit on it. anyway i can do that? hide it almost from the surface?
Great video, thanks.
hubert-germany
hubert Ko Thanks Hubert
i just put some on a box collin,,i got it after alot of trial and error,,do they make a jig you can use to make it simplier using your router
Great video, thnx
I just found out that you made two playlists with videos for beginners. I watched them nearly all. They are very useful. But I cannot find nr 18. Where is it?
I know it's not your job to help me, but I have a project I'm working on that I have a couple questions on (HINGES) and I am STUCK. I am reno-ing a china hutch. Put in new glass, painted inside and out and now am to the point of re-hanging the doors. I don't want to use the old ones-ugly, dated, ick-and am trying to find some new ones that will work. Unfortunately surface mount hinges won't work because the doors and cabinet have a routed edge. But Do the new hinges have to be the exact same size (width, thickness, depth)? I've tried some and can NOT get them to work and so am now in the process of filling all the screw-holes and starting from scratch. Got any help for me? Thanks!
how do I get the right placement for angled fold down door?
Hi Colin, Is it possible to install a butt hinge upside down? I am specifically thinking of the hinge type which has bearings. My common sense tells me that both bearings should share the load of the weight of the door and hence the hinge can only be installed one way. My observations however, tell me that the hinge is manufactured for either way up but then only one bearing will take all the downward force of the weight of the door. Any advice would be welcome. Thanks for many informative videos and your clear voice without any "music" and hype.
I wish you could install the hinge in the middle, the closest one (brass) to you right next to the white hinge.
Hi Colin,
Thanks for the video. In regard to Butt Hinges is there any reason that you use the marking gauge when scribing the timber for the long edge of the hinge, rather than turning the hinge over, pushing the knuckle/pivot up against the edge of the workpiece and scribing along the edge of the hinge? This is how I have done it previously, just wondering what your take is on this method.
Thanks again.
Jon
RJJFavorites I like to use the marking gauge because it allows me different distances of hinge depth and still gives me a nice straight line to follow. There is nothing wrong with how you are doing it, I use the same method from time to time ... I always say, if it is working for you, no need to change :) ... thanks for posting Ron, always good to hear what others are doing.
what happen to the partial insert hinges?
Excelente Video. Querría saber como se llaman esas mechas para poner los tornillos de las bisagras. Gracias y felicitaciones de nuevo desde Córdoba, Argentina
Marcelo Sappia Thank you for your comments, and greetings to you in Argentina. I have not been to your country but it looks like a beautiful place.
What happened to part #18? It's not in the playlist...
I have semi-exposed kitchen cabinet hinges. Is it difficult to change the hinges so they are hidden
Sir,I need a hinge for plexiglass where can I get those can I use regular hinge?
I have a sneaking suspicion that you're from the North or youre canadian... Great video btw
I used a piano hinge to make a collapsible display wall what kind of latch or support can I use to keep it open
Thanks for the tip and thanks for watching!
nice
Thanks!
Thanks for the video. You did not include anything on barrel hinges. Do you not like them?
you failed to show how to attach a but hinge to the door
I enjoy your videos a lot. Please adjust the camera settings to get rid of the "flashing" when you have white or shiny objects on camera, it's very disconcerting.
I got rid of my perfectionism in codependents anonymous..........
Full Back-to-Back Wrap-Around Hinges installation ????
3:33 Will the other person in "we" ever be shown?
Will you ever be smart?
Do you know anyone who wants to buy Brainerd 4" Zinc Plated Strap Hinges? I have over 3,000 of them. Thanks!
What about a parliament hinge?
Helicrete Sydney cancelled by boris sorry mate
I'm a real beginner, but even I can see that the hinge is not properly lined up at 7:31. It's WAY off. Anyone can see that. Why didn't he?
You never covered the third group of hinges…
Half of this video is for "the most common butt hinges", and you didn't even install them so we can see an example of how you fit them properly. Only talking...
Too many tools!!! I don't have half of these. Will keep looking for someone who is doing this with hand tools and ruler. Thanks anyways
Thank you very much (Tudah Rbah, in Hebrew). The real Name of the Creator is Yah (short version). The long Name, asd told to Mose, is Hayah asher Hayah. Do the 7 appointed times, as written of in Leviticus 23. Shalom and ahabah (peace and love ) from our home to yours.
Twenty minutes of explaining hinges? I think you should make shorter videos. I almost always edit mine to less than five minutes.
aqwood Thanks for your comments, the problem is when I make them too short people complain that there isn't enough detail and in the end, it's not about the length of the videos, it's about ... are you giving enough detail to engage. If you find them too long, just press the speed-through button :)
That surprises me... I thought that people like to see the same amount of detailed content in shorter time. You are also making different kind of videos than I am, this is a how-to for beginners, not sharing your projects for busy people with too many subscriptions already :-) So more detail is needed. Thanks for the reply.