Wonderful, thorough, easy to understand video. Two additional things I did that was not included in this video was #1 Holding the machine with the filter up I then VERY GENTLY ( I spent $600 on this vacuum, I take extra good care of it) tapped the machine onto a folded dish towel laying at the edge of my counter top. I did this 3 more times. There was more fine powder dust that came out of there than everywhere else combined. I used a flashlight and looked down the vacuum hole and could see a thick layer of powder dust so #2 I took an extra soft toothbrush and inserted it into air intake hole on the lower right side of the machine. The layer of dark grey dust came right out. The machine was even more dirty than before I took the canister cover off so I wiped it down again and used the soft toothbrush to go over the rubber parts and crevasses. I sat the filter, canister, roller and roller end cap out in the sun to dry and put it all back together the next day. It works perfectly and looks like it just came out of the box brand new.
Video was helpful for me but thank GOD I double checked before I washed the brush head like he says in this video. That part is NOT to get wet and people have ruined theirs so BE CAREFUL and always check different sources
Hi. I have recently bought my dyson v10 and I m so very happy with it. But after a month , now it's time to clean it. I am glad I came across your video of cleaning my dyson V10. This is the first I time was cleaning it and with your clear instructions I was able to do it so easily and efficiently. 😃👍One thing you didn't showed how to clean the floor soft tool attachment , but I was able to figure that out with another video. 😃Thank you so much and best wishes.😊
When cleaning don't clean while motor in case. Clean case carefully and dry out. I've done this a 100 times on v10 with no issues. Have to always be careful
Replaced by Dyson Ball with this sucking monster. Now my friends enjoy vacuuming their rooms and the constant nagging at them is over--Thank God!. I always wondered why I couldn't just purchase the long arm to go with my smaller wireless Dyson handheld (b/c it fits perfectly) but the actual motor on this new one is far more superior than the Dyson Ball and the handheld. KEEPER!!!
So far so good with this vacuum. ua-cam.com/users/postUgkx8ISPQRRAfpAaX4msGjyodObTBnlj4T5g I was a little concerned to find it seems to be all plastic, but the reviews were good, so I'm hoping for the best. Very easy to assemble Recommened, and only attachments I've used so far work well, and are easy to use. Doing a good job on the new carpet in my bedrooms and stairs. Works well on the hardwood on my main floor too. Reasonable weight and cord length. I already knew from an earlier review that it wouldn't fit under furniture, but I can use my Eufy for that, so no problem - the high traffic areas that need a stronger suction was really what I bought this for. If it continues as it's started, it will be a good buy and well worth the money. I have had two Shark Rocket stick vacs in the past that are super easy to use, but the motors just don't last well, even with scrupulous cleaning of the filters. I'm hoping for better with this Bissell.
I’m seeing so many conflicting comments to your video. You washed the brush head housing with the motor piece attached. Is that how you’re supposed to clean it?
Alright, so I rinsed out the motor brush (where the soft brush goes) after reading the comments that you SHOULDN’T put it in water, so now if it doesn’t work, How do I fix??😫
When cleaning don't clean while motor in case. Clean case carefully and dry out. I've done this a 100 times on v10 with no issues. Have to always be careful.
Have you gone mad ? You can't rinse the brush head off just like that, because there are mini cables and motor inside, so never like that, there many tutorials showing how to separate the motor bar from the head so you can wash it easily, it may take some time to do, but it avoids you damaging it. While for the brush roller, you can use some soap 🧼 and water to wash it and let it dry.
Help please! The roller part that has the hair on it - I took it out and cleaned (did not wash) but now after putting it back in it doesn’t spin anymore - have tried reassembling a few times but not sure why it won’t spin anymore 🤷♀️
I have cleaned my v10 following your direction till it came to removing the beater bar. The cap in hand but beater bar will not release from unit. What do I do?
Not sure if I know which part you are talking about. But I think you are asking about the part that all the hair gets stuck in. To release you need a 2p coin and twist anti clockwise. Like and subs to support channel
RayS Tech-Know-logy Yes, it is the part that hair gets attached to. I have released (unlocked) the end .. it’s supposed to stay attached and you pull it out to clean. Well, that’s not what happened. I attempted putting it back together thinking it would reattach and remove as it’s supposed to. No luck! I need HELP, please.
Video is great. But I never saw how you wash the piece that holds the roll sweeper. It gets really dirty as the litter from cat box gets sucked up & plasters on the foot & roller brush. Can I wash them in water?
my dyson is starting to smell iv cleaned the filter and wiped out the bucket but wondered is it safe to use washing up liquid to clean the clear bucket
When cleaning don't clean while motor in case. Clean case carefully and dry out. I've done this a 100 times on v10 with no issues. Have to always be careful
Oh my gosh! I assumed Dyson's cordless stick vac's were up to speed with no hair wrap technology. I was really close to purchasing one but that is a deal breaker for me. I'll wait...
Absolutely the worst value machine out there. Why? I moved into a brand new flat, am single and hardly make any mess. This is my second replacement. It is impossible to see where there could be a blockage. Initially it stopped working after a week and I was given a replacement. After 4 months, it stopped again. Was sent a new filter, did not work. Was sent a new main body. Why do we know this machine is useless? Dyson send a new body and do not ask for the old one as they know this will happen over and over again. As it has done to many, many other people. Just Google Dyson V10 problems and it is always the same issue...BLOCKAGE! Very expensive vacuum cleaner and when the guarantee runs out...no more replacement parts and you will have wasted your money. DO NOT BOTHER BUYING THIS MODEL.
I have this machine and hate it! I complained to Dyson and they send me a second for free, and I hate it too. First world problems, maybe, but seriously - not worth the $$$ !!
Wonderful, thorough, easy to understand video. Two additional things I did that was not included in this video was #1 Holding the machine with the filter up I then VERY GENTLY ( I spent $600 on this vacuum, I take extra good care of it) tapped the machine onto a folded dish towel laying at the edge of my counter top. I did this 3 more times. There was more fine powder dust that came out of there than everywhere else combined. I used a flashlight and looked down the vacuum hole and could see a thick layer of powder dust so #2 I took an extra soft toothbrush and inserted it into air intake hole on the lower right side of the machine. The layer of dark grey dust came right out. The machine was even more dirty than before I took the canister cover off so I wiped it down again and used the soft toothbrush to go over the rubber parts and crevasses. I sat the filter, canister, roller and roller end cap out in the sun to dry and put it all back together the next day. It works perfectly and looks like it just came out of the box brand new.
Video was helpful for me but thank GOD I double checked before I washed the brush head like he says in this video. That part is NOT to get wet and people have ruined theirs so BE CAREFUL and always check different sources
Fuck, I washed mine...
Thank you so much for your clear and informative lesson. You have saved me from a lot of aggravation! Thanks!!
Hi. I have recently bought my dyson v10 and I m so very happy with it. But after a month , now it's time to clean it. I am glad I came across your video of cleaning my dyson V10. This is the first I time was cleaning it and with your clear instructions I was able to do it so easily and efficiently. 😃👍One thing you didn't showed how to clean the floor soft tool attachment , but I was able to figure that out with another video. 😃Thank you so much and best wishes.😊
Thank you for your kind words and feedback. Please make sure you register your dyson for warranty. Please like and Subscribe
Me to big thanks
But I knew the main body of the brush could'nt bewashed at all!!! Because there is tre second engine group!! Am I wrong or what?
Omg, this video was great. Helped load. Guys, remember to let everything dry properly. Takes around 24hrs. Common sense apples. Keep up great work.
Thank you. Yes very important to let everything dry at least for 24hrs after washing. I leave it near a heater.
This is good step by step process. I like it.
Thank you
Ooooooh I didn’t know I could wash the foot!! Thank you that’s what I was looking for.
When cleaning don't clean while motor in case. Clean case carefully and dry out. I've done this a 100 times on v10 with no issues. Have to always be careful
Best review and worked great for me. Remember to dry everything
Replaced by Dyson Ball with this sucking monster. Now my friends enjoy vacuuming their rooms and the constant nagging at them is over--Thank God!. I always wondered why I couldn't just purchase the long arm to go with my smaller wireless Dyson handheld (b/c it fits perfectly) but the actual motor on this new one is far more superior than the Dyson Ball and the handheld. KEEPER!!!
So far so good with this vacuum. ua-cam.com/users/postUgkx8ISPQRRAfpAaX4msGjyodObTBnlj4T5g I was a little concerned to find it seems to be all plastic, but the reviews were good, so I'm hoping for the best. Very easy to assemble Recommened, and only attachments I've used so far work well, and are easy to use. Doing a good job on the new carpet in my bedrooms and stairs. Works well on the hardwood on my main floor too. Reasonable weight and cord length. I already knew from an earlier review that it wouldn't fit under furniture, but I can use my Eufy for that, so no problem - the high traffic areas that need a stronger suction was really what I bought this for. If it continues as it's started, it will be a good buy and well worth the money. I have had two Shark Rocket stick vacs in the past that are super easy to use, but the motors just don't last well, even with scrupulous cleaning of the filters. I'm hoping for better with this Bissell.
Great video super helpful. Reading comments made me take 1 extra step. Let the foot dry fully before using.
I’m seeing so many conflicting comments to your video. You washed the brush head housing with the motor piece attached. Is that how you’re supposed to clean it?
Hi. Cannot unscrew the knob?any tip? Thanks
Coin
Alright, so I rinsed out the motor brush (where the soft brush goes) after reading the comments that you SHOULDN’T put it in water, so now if it doesn’t work, How do I fix??😫
When cleaning don't clean while motor in case. Clean case carefully and dry out. I've done this a 100 times on v10 with no issues. Have to always be careful.
Super helpful - thanks very much
Thanks for the comment, like and subs to support me.
Very helpful, thank you for the tutorial.
The plastic part the houses the roller, cannot be submerged in water, how do you clean that?
Hi I submerge it. As long as it’s been detached. As there is no wires in it or you can use a damp cloth.
Like and subscribe would be great
False. I rinsed mine under a running faucet and it stopped working
Have you gone mad ? You can't rinse the brush head off just like that, because there are mini cables and motor inside, so never like that, there many tutorials showing how to separate the motor bar from the head so you can wash it easily, it may take some time to do, but it avoids you damaging it.
While for the brush roller, you can use some soap 🧼 and water to wash it and let it dry.
I was dumb not to read the comments, now mine won’t spin.
How often do you need to do this?
This should be done 1s a month but depends how much you clean. The other way is when a pipe image comes up on the hoover.
Please like and sub
What screwdriver I need for this dyson v10
Help please! The roller part that has the hair on it - I took it out and cleaned (did not wash) but now after putting it back in it doesn’t spin anymore - have tried reassembling a few times but not sure why it won’t spin anymore 🤷♀️
Is the spin still attached. Check nothing on the inside. Not sure want else. Anyone else ideas pls
I have cleaned my v10 following your direction till it came to removing the beater bar. The cap in hand but beater bar will not release from unit. What do I do?
Not sure if I know which part you are talking about. But I think you are asking about the part that all the hair gets stuck in. To release you need a 2p coin and twist anti clockwise.
Like and subs to support channel
RayS Tech-Know-logy Yes, it is the part that hair gets attached to. I have released (unlocked) the end .. it’s supposed to stay attached and you pull it out to clean. Well, that’s not what happened. I attempted putting it back together thinking it would reattach and remove as it’s supposed to. No luck! I need HELP, please.
Feel free to send a small video or pic of your issues to TechKnowlogyenquiries@gmail.com
Feel free to send a small video or pic of your issues to TechKnowlogyenquiries@gmail.com
Video is great. But I never saw how you wash the piece that holds the roll sweeper. It gets really dirty as the litter from cat box gets sucked up & plasters on the foot & roller brush. Can I wash them in water?
What’s the difference between v10 and v11 animal???
More power and better battery life
Thank you for your service sir
Very good directions.
Thank you. And again please let all components dry properly
All the bridles on my rotating head are gone,making lots of noise on floors but not carpet,my Dyson not very old either.2 years
my dyson is starting to smell iv cleaned the filter and wiped out the bucket but wondered is it safe to use washing up liquid to clean the clear bucket
That smell isn't the bucket. It's the bacteria filter. You need a new filter if it's beens used for about 6 months ish
@@Tech-Know-logy havnt used the hoover that much checked the filter nothing wrong with it and rinsed it
@@colmcoleman6421I had to change filter as the bacteria layer started wearing out after washing it so much.
thank you for this helpful video! :)
Thank you for watching
How to clean the rest of the head ?
That is the whole head. The tube is easy. Just wash with hot water and a long stick.
Like and subs
My brush wouldn't slip out, does anyone have a suggestion on how to get the brush all the way out of the holder?
mine wont come out either. hopefully someone has an answer.
DO NOT RINSE the brush. That's where the motor is you will damage your product
When cleaning don't clean while motor in case. Clean case carefully and dry out. I've done this a 100 times on v10 with no issues. Have to always be careful
You made soo simple 😮💨
Don't wash brush, unless you removed that bearings.
Works great
Thank you so much!!
I want a dysentery but soo expensive
Huh?
😂🤣😂🤣😂
Lmao great helpful and funny too. Ty
Oh my gosh! I assumed Dyson's cordless stick vac's were up to speed with no hair wrap technology. I was really close to purchasing one but that is a deal breaker for me. I'll wait...
Yeap. Even after all, they charge still the headache lol
@@Tech-Know-logy 🤦
@@Tech-Know-logy I'm eyeing the V15 detect now. Not buying, yet though.
@@LisannNatoli let us know if its worth buying. Or is the laser a gimmick
@@Tech-Know-logyOK
I use a seam ripper to my daughter’s long hair out of the brush head.
Great tip
Shouldn't wash the brush head housing as there is a motor in there. Just give it a wipe down with a moist cloth
I did this not knowing that and now it won’t spin 😥
Best Video! Thanks so much!!!
Thank you. If you can like and subscribe to support my channel.
You didn’t show how you washed it
Remove filter just turn it comes out
So thanks 🤩🎉
I missed the part where head was getting washed. I know how to cut hair with scissors its much easier, safer and doesn’t scratch your hover.
The females in my family 😂😂😂😂
Absolutely the worst value machine out there. Why? I moved into a brand new flat, am single and hardly make any mess. This is my second replacement. It is impossible to see where there could be a blockage. Initially it stopped working after a week and I was given a replacement. After 4 months, it stopped again. Was sent a new filter, did not work. Was sent a new main body. Why do we know this machine is useless? Dyson send a new body and do not ask for the old one as they know this will happen over and over again. As it has done to many, many other people. Just Google Dyson V10 problems and it is always the same issue...BLOCKAGE! Very expensive vacuum cleaner and when the guarantee runs out...no more replacement parts and you will have wasted your money. DO NOT BOTHER BUYING THIS MODEL.
I have this machine and hate it! I complained to Dyson and they send me a second for free, and I hate it too. First world problems, maybe, but seriously - not worth the $$$ !!
Why else do you hate it so much.
Changing a bag is much easier than dealing with this. Way overrated!
It's just light and easy. No wires. But yes cleaning it is not fun.