It takes a long time to get a response to the commands I send, and there is no immediate notification when the power goes out. I have tried several times.
hi, i have this all functionality works as described except the most important one: it does not send the SMS when the power fails. it only sends sms when power returns. i changed to a different bigger Li-ion battery so the battery is not the problem. couldn't be that the firmware is corrupted? did sent an email to the email address on website but there was no reply
@@marlborowims hi i would like to ask, I already use gsm alphabet but when i put message that have number it didnt receive the message but for word it receive the message
I need the function in the opposite direction! If the cable is cut, it triggers the alarm! The device is in the boot and the cable goes round the bikes on the bike rack.
@@marlborowimsI already check my phone, and it use gsm code but it just receive message that is alphabet such as RESET but for @#123456890 it cant receive. Hopefully u can help me
@@marlborowimshi i would like to ask, I already use the gsm alphabet but the message it can receive just RESET and when i message @#1234567890 it didnt receive the message. Hope u can help me
@@marlborowimshi i would like to ask, I already use gsm alphabet but when i put message that have number it didnt receive the message but for word it receive the message
It takes a long time to get a response to the commands I send, and there is no immediate notification when the power goes out. I have tried several times.
will this work with any GSM card ie an EtherSIM card (uses push notification and does not expire)
Verizon operates on CDMA. Will the GA01P work with Verizon network?
Do you have a link for the battery pls?
Search 3.7v Rechargeable 802540 600mAh
hello, can you tell me if it is possible to operate in closed contact, the alarm will be activated when it opens?
yes
What is the battery capacity?
hi, i have this all functionality works as described except the most important one: it does not send the SMS when the power fails. it only sends sms when power returns. i changed to a different bigger Li-ion battery so the battery is not the problem. couldn't be that the firmware is corrupted? did sent an email to the email address on website but there was no reply
I have exactly the same problem, please let me know if you found a solution, thank you very much
I had it too. It was a low battery. It must have 600mAh
@@marlborowims hi i would like to ask, I already use gsm alphabet but when i put message that have number it didnt receive the message but for word it receive the message
@@muhammadnaqib7145 Hello. Try using an old push-button phone.
when you cut the power it doesn't send me sms signal even when it comes back please help me
I need the function in the opposite direction! If the cable is cut, it triggers the alarm! The device is in the boot and the cable goes round the bikes on the bike rack.
if I understand correctly, my phone will send an sms on the number of the sim card installed in my GA09? but it does not work, I have an error 0
Text programming messages MUST be written in the GSM alphabet. Not UNICODE. Alternatively, use an old phone. For example, a push-button Nokia
@@marlborowimsI already check my phone, and it use gsm code but it just receive message that is alphabet such as RESET but for @#123456890 it cant receive. Hopefully u can help me
@@marlborowimshi i would like to ask, I already use the gsm alphabet but the message it can receive just RESET and when i message @#1234567890 it didnt receive the message. Hope u can help me
@@marlborowimshi i would like to ask, I already use gsm alphabet but when i put message that have number it didnt receive the message but for word it receive the message
@@niklutfil2361 Hello. Try using an old push-button phone.