The BEST GoPro CINEWHOOP just got BETTER! GEPRC Cinelog 35 V2 Review!
Вставка
- Опубліковано 3 чер 2024
- The V1 Cinelog 35 was in my opinion one if not the best cinewhoop for full Gopro, Geprc listened to all the advices on how to improve it and delivered with the V2!
💰Buy the Cinelog 35 V2! 💰
Geprc GET 5% off with code rimzler ! (Rimzler5 does not work lol)
geprc.com/product/geprc-cinel...
❤️Follow me on Social❤️
/ rimzler
/ rimzler
/ rimzler
👕Get Rimzler™ wear and accessories!👕
teespring.com/stores/rimzlertm
⚔️Toss a coin to your Rimzler!⚔️
paypal.me/rimzlertech
00:00 Introduction
01:14 Unboxing
03:02 Specs
07:03 First Flight
13:53 Second Flight
20:32 Final Opinion - Навчання та стиль
Discount code is RIMZLER not Rimzler5, I'm a moron ahahahahaahah
lol
great review, your videos are great man!!
it's really nice to see a review from someone telling their honest opinions.. nice job!
Well done Rimzler! Thank You for another great review.
Always love your videos.
Another banger! Quality as always, Bought the frame and swapped out the guts from the original added the 03 and yeh top frame! Flys 👌
You rotating around the dog made me smile wide this morning hahaha nice piloting skills man! And yeah I might buy this Cinewhoop this Summer. We'll see :)
Ottima recensione come sempre 👍
You sir, are and excellent pilot! Really incredible.
Would be interested to see how you tune this one further
Awesome flight!
Geprc just never disappoint I really love there products
14:20 section was so funny mate - spat my coffee everywhere 😂
The chicken shots had me dying hahah awesome video man
Man love your vidéo !!
I got some probleme in betaflight the setup calibration is wrong could you share your settings and rates ?
Great video! Do you know if it came with Preset 4.3 or 4.4? TIA
Loved the review. Nice rip meet you.. New Sub from Philly.. 👍👍👍
Mikey
Hey man thanks for the review! What is your PID rates for cinewhoop in general?
I so love the chicken chasing scene! Thanks to your video, I just ordered this and can't wait for it to arrive. Quick question. Since I got the GPS version, will the FC already be setup in Betaflight Configurator for Return to Home and Landing or do I need to set that up myself?
2:29
Grear review. I have the "performance" eddition of the v1 (the one with the neon green prop guards) and it uses the same 2105.5 motors and the noise of the props/motors is my only complaint about it. It's way louder than all my 5" quads. I like the changes the v2 has made but not enough to buy another. Ive already added gps and I fly with a Runcam 5 orange so the toilet tank battery doesnt really bother me.
What a great yard/location :)
Thank you for the info and for frightening the chicken 😁 😁
Thank you so much for another great Video, Man.
I just got this drone as well, would love if you can explain or send me a good tutorial how to bind it all together as I have a problem even to arm it
Thank you
Hello, do you happen to have any tutorials on configuring the DJI Remote Controller 2 in Betaflight (regarding arming, gps etc)? I also own a Geprc CineLog35 V2 with a DJI Air Unit, Goggles 2, and FPV Remote Controller 2.
I bought the previous version after watching one of your videos. I thought there were a few changes needed. I am tempted by the V2
The V1 is one of the drones i used the most for work with full GoPro, always did the job, V2 is a good way of having redundancy, for sure is a little better, but imho not enough to switch as V1 is great already and I'm going to keep using it for riskier stuff😂
Hi!
Wich do you prefer? Evoque f5 o3 or mark5 o3?
16:27 I loved that Chicken Run! 😂
Chicken run is always a joy😂😂😂
Thank you for the review! I'll consider to get it
Thank you for tuning in 😍😍😍
What did you tune your sensitivity too? Just bought the same drone and agree its very sensitive
Great video Rimzler, will you share the pids and filters for the Cinelog35 V2?
I've kept it all stock really, flies fine for me!
Ciao capo, do you have any suggestion about the cinelog35 v2 with the new motors it flys good but if I want to dive or go to zero trottle it wobbles like crazy... Run it with 1300mah and full GoPro 11.
Thank you!
What do you think is the best 3 or 3.5 inch quad for freestyle flying and tricks and also whicj is best for freestyle out of the cinbot 30 or cinelog35 performance or cinelog35 v2?
Hey bro! How durable are the guards on this? I had the V1 and those were terrible. Broke very easily. Are these better on the V2?
Thanks for the review. How does it handle the flight out there on the wind?
Not bad at all, it has the power to push through, of course something with no ducts will hold a bit better!
Nice video!!
Where can I get your red GoPro vertical mount? 0:21
Thank you so much!
www.thingiverse.com/thing:5215994
I just one of those. I also feel like with the gopro it speeds up a lot. I'd like to see what rates are you flying in it, can you show us?
Be sure to verify how they wired things... I had a reverse polarity on the gopro adapter... black on red !
How are you flying with the FPV controller 2
Chicken chaser ;) dirty drone is instant karma :)
Like the cinewhoop with gps idea, and also I'd fly it with o3 - good enough quality, less cash risked. But also I never fly for clients. Thanks for the review. My gf asked already, when are they traveling and eating delicious Italian food again? ;) greets, Mario
What controller do you used ?
Great video. I cannot figure out how these GPERC drones are build and how to set them up? Do you have to build it, if so, does it require soldering? How is the setup? Do you have to configure ever single parameter, like you had to with Pixhawk controllers? Do they have some sort of flight modes or is it pure manual flight? Thanks.
If you get a BNF (bind and flight) it's already built and programmed, just have to link your radio and goggles but you have to get the appropriate version
It has also stabilized modes
Hey Rimzler! I'm thinking about getting this. So expensive though lol.
I’d be interested to see how it flies with a 1050 mah Lipo with GoPro.
And also like to see Alec freestyles with a 1050 Lipo
CineLog 35 series is simply amazing. The best CineWhoop ever made.
I'd like to see it up against the Qav Pro from Lumenier. I suspect the QAV is on par if not better. Especially the nano that just came out.
Hi! Is this model used with dji glasses?
Hi there, could you please give me an advice me. Is it possible to pair cinelog 35 v2 Performance HD Avatar to DJI Goggles V2 ?
Nice video man. Love it. If I live in Portugal, wich is a country from Europe, if I use your link Will I have problems with paying extra taxes? Thanks you man
"Come on, come on! No no no don't stop, or iamgonna cook you for dinner!" 🤣🤣 My favourite is chicken chase!!
Ajajhahajahahahhahahahahha didn't have many chicken chases lately, gotta do something about it🐔🛸🐓
@rimzler Thank you on behalf of the chickens! 🐔👊
can he calculate the distance to the house without GPS, only by ping? and, did you put wtf os on glasses to get the whole osd?
I love your videos *THUMPS UP* Can you tell me what PID Settings you use ?
Thank you so much! I usually don't touch the pids drones come pre installed with! Especially for reviews I show how they come!
love the chicken chase and video as always @Rimzler. Question - how would you compare this to the cinebot30 O3? have the bot30 O3 and considering this, but not certain if needed. I'd like the bigger drone's stability possibly but curious if you have thoughts. I have 6s cinebot so it has quite a bit of power. Going to test it with full GoPro soon - just need a case for it.
I’m in the same boat. Also thinking about going with a smaller cine25.
They are two different drones. It's basically just a matter of fingers, but being a hair less powerful, the Cinebot, you'll have less need to get your hands on the expo. Both carry a full GoPro. If you are looking for performance, the drone just reviewed is better, but being a cinewhoop it is quite unlikely that they will professionally ask you for a pure acro flight. Most likely an outside flight of a certain type and an inside flight. If so, the Cinebot is better. Let's say that on balance the first version of the Cinelog 35 (among the three series) would be better, and I don't even consider the Performance which is practically equal to the V2, at least in terms of engines and FC. So yeah, I agree with Rimzler about version 1. And I highly recommend him to stick with it. So much so that I installed the O3 both on the Cinebot 30 (at the time of purchase this model was only available with the Caddx) and on the Cinelog 35 V1 and not on the performance. Of course it is my personal opinion.
@@andreachiuppi thoughtful post. thanks for sharing and your points make a lot of sense. for now, I no longer have FOMO :) (fear of missing out) on the v2
@@victorlugardo3703 yes, it feels like looking for the goldilocks zone. "One was too small. One was too big... And, one was just right" :) but these could all be in the goldilocks zone for their specific use cases.
@@fokusfpv I would up buying the Flywoo LR4 🤓. I couldn’t stand it it anymore and went off the rails.
The chicken scene was epic like a jurassic park epic moment :')
Ahahhahahahahahahhahaha thats
because I am relatively new I would like to ask your opinion if it is better to upgrade the Avata with axisflying or to get to buy the Geprc 35 ?thanks a lot
What do you need it for? Cinelog will be nimbler and fly better
Is it good frame to protect O3 ?
hahaha, i laughed like 3x during this. thank you.
just purchased the cinelog35 v2 hd03 (elrs with gps) - and used your code brother. thanks for the informative videos. this is my first drone 😃 excited to get it and start making videos and then make some money 💰
That's amazing! How is it going?😍
@@Rimzler still waiting for geprc to ship it. just purchased it right before that comment lol. I will let you know! followed you on instagram also 👍
Good video IMHO. It confirms to me that as a GPS drone pilot moving to FPV i should start with the Cinebot30 O3 with 6S system and battery that lasts close to 8 mins. 4-5 mins on this seems too short coming from a M3.
I get over 10 minutes consistently out of GepRC 6S 1100 LiHV on my CineBot30. I'm expecting delivery of this CineLog35 V2 any day now. I'll be experimenting with batteries but I'm thinking GAONENG GNB 1300 LiHV may be ideal. I hope to get between 6 and 8 minutes out of it. I primarily bought the CineLog35 to chase chickens.
@@ShaneInseine hello, have you tried ? What are the results? I'm hesitating between the cinebot30 and cinelog 35 v2
Thanks ! 🙏🏼
Hey Rimzer, how are you?
I wanted to ask you, would you be able to give me the settings you used in betaflight for your cinelog35 v2?
I'm struggling to make it fly with the GoPro 11.
Send a mail to rimzler.tech@gmail.com
This drone rescue mode is actually work?
Ciao, con una GoPro 11 mini è meglio il cinelog35 o il cinebot30?
Nice ! a friend of mine messed up the settings and I reloaded the CLI files. Is there a better way to get everything back to factory setting or setting that will get it to fly better? on the Cinelog 35 v2 the orientation and everything looks normal in beta flight but when I arm to takeoff instead of gradual power it just goes straight to almost full power and is a screamer when I hover. Thanks for your help.
You can try asking Geprc for the proper cli dump so you have the right settings, in case they don't give you send a dm on my Instagram
Hi!
Where did you buy the support to leave the GoPro vertically?
Thanks
Printed and designed myself!
Hey bro do you reckon that this could fly the new go pro 12 ? It’s kind of a lot of weight but do you believe it would fly just fine ?
Yes no problem at all!
With the O3 air unit and the DJI goggles, how are you getting the home direction and satellite counts appearing on your OSD? I selected them in Betaflight OSD but they don’t show up in my DJI goggles. I could really use the help! Thank you.
What betaflight version?
I think I figured out what is wrong. The GPS is no longer talking to the flight controller for some reason. I have to figure out why. This happened after I replaced the analog camera with the o3 air unit.
I bought this model 2 weeks ago and the drone flies great, it has enough power to carry the go pro but the problem is with the GPS, I set the settings as recommended by GEPRC, but the GPS sometimes works, sometimes it doesn't, mostly it doesn't work and it takes a long time to catch the bass satellites
With the latest betaflight updates I'm struggling with gps, on all brands they are slow to pick up and kinda unreliable sometimes
@@Rimzler :/
Can you adjust the camera angle tilt on the Cinelog 35 v2? It looks like the O3 camera is held on by two screw on each side, and therefore the angle is non-adjustable?
Yes but the bottoms screw is not a hole, but a curved rail that follows the tilt, so you can tilt no problem and still have it very securely fixed
@@Rimzler This was the exact information I was looking for. For some reason I couldn't find any review that articulated this
A question, is the left rear prop guard of your drone like 1mm lower than the right one?
May be but have to check, I remember the ducts overlap at the standoffs
@@Rimzler that's right as well
Hey one quick question: I see that you are also getting DJI's "remote controller stick error" like me, is there a way to fix that? what is it? My controller keeps disconnecting from the air unit and I dont know if it is related... hmm Great video as always!
I pretty much ignore it, i believe there are 2 probable causes:
1)
It's a bug from the avata, when you go in manual you have to align the sticks and this doesn't happen on o3, so it gives the error
2)
Maybe it's to do with the gimbal spring screws on the back of the radio not being pressed all the way, but i like a little bit of friction and will not change it
I see thanks! It might be good to see a video on the different ranges you get with your setups, dji vs expresslrs vs ...etc. I'm seeing a lot of people complaining about the range of the new dji fpv setup with the integra and fpv remote 2 so maybe we can learn how you do it! As always great videos keep it up!
1:43 Nice quality foam 😂👌🏻
😂😅🤝
Did you try cinelog 35 performance?
Thanks bro!! Did you hack goggles 2(or is it integra)?
i can see you have betaflight information on your goggles screen, i wasnt able to do it, i understood it was only possible in the the other goggles v2, could you help me here? I have the ones with touch panel
🙏
i have the same setup and OSD works fine with altitude, speed, bat level etc... don't have to hack the goggles
love the chicken
Круто управляешь.
They are so many amazing drones on the market but i still love my slow GEPRC CROWN 😅😅😅 (although i really HATE its propwash :p )
Sensacional men 🏆🏆🏆🦅🦅🦅🍏🍏🍏🙌🙌
Thank you for tuning in😍😍😍
Greetings from Toronto. Very helpful video especially for a new fpv pilots like me. I have question if you can shine some light into it. I am looking to purchase GEORC CineLog 35 V2 HD O3 FPV. On the website of GEORC there are few options and I’m not sure which one is the best for me. I am looking to connect it to DJI FPV controller 2 and DJI Goggles Integra. I am seizing there are different options on the website and was wondering if you can give a little help on that. Thank you and I am looking forward to see new videos
Thank you! For your combo you would need the O3 PNP version, that comes without receiver, you will connect the radio straight to the o3
Great thanks for the info, your video and comment was very helpful. I am just awaiting the drone to arrive. One more question GEPRC discontinued the GoPro 11 mini mouth for CineLog 35 V2. I have GoPro mini 11 that I would like to attach to the drone, any ideas from where I can purchase that particular mount or what other options are available out there. Thank you in advance for your reply.
@@sethvane669Did you ever figure this out?
Does anyone know what screws length is needed for the props?
Can you make. Quick comparison to cinebot 30? Grazie mille
I will as soon as I manage to get home ahahahha
Anyone has an idea for more quite props? I can’t get used to the noise level of my cl 35
What do you recommend this one or the cinebot30? I'll be flying with a full sized GoPro and will be filming industrial construction site work and holiday videos
35 makes more sense to me, it's more capable and not that much bigger, I do most of my full GoPro work with it, can also dive buildings and chase cars
@@Rimzler Oh no, I ordered the Cinebot30 1 hour ago 🤣
Ahahahahhahahahahah daaamn, I mean is still a very solid drone, but in one hour they have probably not shipped so can change your order
Another great video! I know they are different sizes... but, compared to Cinebot30, how would you rank those two against each other? Mostly interested in flight performance. Thank you!
They are two different drones. It's basically just a matter of fingers, but being a hair less powerful, the Cinebot, you'll have less need to get your hands on the expo. Both carry a full GoPro. If you are looking for performance, the drone just reviewed is better, but being a cinewhoop it is quite unlikely that they will professionally ask you for a pure acro flight. Most likely an outside flight of a certain type and an inside flight. If so, the Cinebot is better. Let's say that on balance the first version of the Cinelog 35 (among the three series) would be better, and I don't even consider the Performance which is practically equal to the V2, at least in terms of engines and FC. So yeah, I agree with Rimzler about version 1. And I highly recommend him to stick with it. So much so that I installed the O3 both on the Cinebot 30 (at the time of purchase this model was only available with the Caddx) and on the Cinelog 35 V1 and not on the performance. Of course it is my personal opinion.
@@andreachiuppi - Thank you so much Andrea. I am basically looking for one of these to do some clean cinematic shots of canyons and hoodoos, but in the same time I'd love to get something that can pull little faster and do some acro here and there To me, it looks like Cinebot30 is what I'm looking. I'm not doing professional video work anymore, this is for pure personal pleasure :) I'm ordering ElRS, Avatar version for my new Fat Shark Dominator Avatar goggles. Thank you for your amazing and detailed answer once again! Greatly appreciated👍
@@Seii-FPV Thank you for your comment. Unfortunately, having a whole series of drones (I work for Drone Service Italia) I use one of many as needed. Paraphrasing is how analog photography controls the digital one. With film you had to check and be careful with the shots, otherwise you had to carry shoe boxes full of rolls of film with you, while now with digital you don't worry about taking photographs. So having only one drone (analogue film) you could have, like, a narrow horizon. If you plan to use Cinebot30 then consider that you can use it both outside and inside environments, where inside these it is easier to control than Cinelog 35 first version. I repeat, both the Cinebot30 and the Cinelog 35 can be used indoors, but when you are inside a not so large room, the CInebot30 is better. I mean flawless footage, because if I have to go fast and a shaky hair then any drone would be good. Perhaps Cinelog 35, even the first version, would be better only on the outside, while if I had to push harder, the "performance" version would also do very well without bothering the latest version of Cinelog 35, the V2. In any case, if you are interested in the CInebot30 buy it, I am sure you will have no regrets. For slow flight modes, even indoors I recommend putting a Lilo battery. The weight of this together with a GoPro for example the 11 Mini, allows you to go really far, slow and precise. But that doesn't stop the Cinebot from still having power reserves. Obviously, if you do hard freestyle a classic freestyle drone would be better, but if you limit yourself to the usual freestyle tricks the Cinebot30 is fine. In this case just try to anticipate with the throttle and gimbal if you load weight.
If it can be useful, I'll report the flight times (without action camera) that I had made at the time of his arrival.
Cinebot30 without action camera
• 850 BetFPV 4s 05.00 minutes
• 850 Tattu 4s 05.20 minutes
• 1300 Cnhl 6s 05.31 minutes (a little old)
• 1050 Sunpads. 6s 06.00 minutes
• 1000 Tattu 6s 09.00 minutes
• 1300 Tattu 6s (a little old) 09.00 minutes
• 1150 Ovonic 6s 09.24 minutes
• 1350 Fusion 6s 09.40 minutes
• 1200 Ovonic 6s 10.50 minutes
• Anonymous Lilo 5s 13.40 minutes
All things considered, and if a person doesn't have any 35 series models, I'd consider this just reviewed version, no question.
Did I understand right. The cinebot 30 is better for outside?
@ Yes, absolutely!
What is the difference between the CineLog and CineBot?
I love it, I really want it BUT man the sound is hideous 😮😱 really bad, I just have to decide if it’s going to stop me getting it 🤔
Hi there, could you please give me an advice me. Is it possible to pair cinelog 35 v2 Performance HD Avatar to DJI Goggles V2 ? Why I am asking because somebody write that is not possible and I don't know whether to buy a cinelog 35 v2 Performance HD Avatar or not?
You have to get the DJI version to use DJI goggles, either O3 like the one I reviewed that can record videos, or the caddx vista version that doesn't record video
Is this a good drone for real estate cinematic footage (outdoors and indoors) ?
I’m split between cinalog 30 vs 35. Any advice is much appreciated 🙏🏼
I would pick the 35 (and i do when working) because is more versatile imho, slightly larger than the 30 but not by a lot, flies better outside and can pull car chases and a bit of cinematic acro, and that's what I use it for, good indoors too and no much problem around people
Where do you live?? It looks amazing.
Which cinelog35 did you have before? The 2004 motor or performance Version with 2105.5 2600kv motors?😊
I had the first one with 2004 motors!
Hello! Between cinebot 30 and cinelog 35 what would be your recommendation? I already have a 5 inch for freestyle and I'm looking for something quieter to fly indoors and near people. Thank you!
did you decide on that yet? i'm thinking the same thing as you
@@wmfbmp5743 same here i want something quiet i had a cinelog 35 v1 and it screams like crazy
This will be my very first fpv drone. Sad that its even louder than the old one.
I got this drone and on the 3rd time flying it I crashed. When I plug it in to a battery or usb it lights up but there are no beeps. I can see the footage. The FC is flashing like it’s trying to bind and then stays solid red after a while with the receiver staying blue. Everything seems fine in beta flight. Any advice?
Mmh it's weird, no noise sounds like the escs are not connected to fc anymore, but the only thing powering on is 5v rail, It's probable that you will need to replace the board cause it's maybe got hit or bent
would this be too advanced for a first time flyer
Hi! what your preffer, cinebot 30 or cinelog 35v2 (both with gopro 11)? I believe that cinebot is more popular compare to cinelog 35. I will buy an cinewhoop drone for video hobbie (cyclism and sport in general), I have mavic 3 but it drone is not enought for sport video (the perspective is too far and control is slow). Maybe the battery duration is very short (4 - 5 minutes, believe that cinelog have more battery time), is posible that cinelog .- bot fly 8 minutes with and without gopro 11? muchas gracias! (desde Chile)
Totally go with cinelog35, it's more versatile, efficient and can carry everything
You can use the o3 without gp11, get much longer battery life, if you don't push with a 1300mah you could get to 8 minutes I believe
@@Rimzler muchas gracias ! Vamos por el cine log 35v2 se ve muchísimo más versátil . Saludos desde Chile!
🔥
Can you share your pids/rates?
this one or the cinebot30? 🤔 what would be your choice for shooting Mountainbikers in the mountains?
I would go with cinelog35, even 1st version if you don't care about o3, it works very good and super versatile, can also acro
🔥🔥
im stuck between cinebot30 and cinelog35. i want a whoop for indoor real estate stuff, but some people tell me the 35 is too big for indoor flights. i also chase drift cars but i have a 5in for that
Get the 35 Can do more and it’s still Indoor friendly but if you have a 5 in and want something super small with no go pro get the 30
@@creasedaf1s900 thanks for the suggestion! ill be ordering one next week!
Just got mine a week ago and Im having problems with the flight time, getting 2 minutes max with a 1300, and tried a gopro and It just get it up the air for 20 seconds almost max throttle, any ideas??
That's very weird, are you sure the battery doesn't have a faulty cell?
@@Rimzler I already fix it, it was my first inverted motor drone and it came with the propelers flipped jajaja, thanks for the answer love your videos
What remote controller are you using for O3?
If you're using DJI FPV Remote Controller 2, will it work with the Cinebot30 O3 as well?
Nice honest review❤ Is is louder then cinebot30?
Good question, maybe it is but i have to fly them side by side, maybe the old 3.5 gemfan propellers were a bit quieter, have to experiment
@@Rimzler looking forward for further comparison, keep up good work
They are quite similar
@@andreachiuppi thank you
@Rimzler Would you put the old props on the V2 version to reduce noise ?..Would performance suffer ?
What is this “control stick error” message? Anyone knows how to fix it? I keep getting it on my cinebot30 o3