Don’t forget to turn off air mode in Betaflight for this drone! It will destroy itself if it bumps anything in flight. I went through multiple carbon frames before I figured that out. Joshua Bardwell has a great video on air mode and what it does.
Nice build! It’s been a good minute since I have built a FPV quad from ground up. The feeling of flying something you built is so rewarding and satisfying!
Amazing tutorial video, i have two questions, where can i purcahse a ready made drone as i have already have a go pro and dji controller and secondly is this better than the avata drone?
Hello, You can purchase a Ready to Fly of this drone from the GEPRC official website. Or you could check local hobby stores depending on where you are from. It is better than Avata in some factors and Avata is better than this one on some other factors.
Great video. I'm searching for builds that goes well for a WN Moonlight kit. Can you make a build with the Moonlight kit? My idea is a cinewhoops that is great for indoor cinematic(slow) and can also move freestyle outdoor(fast) for night city cinematic. Can carry a naked action cam. Thanks in advance.😊
Very cool! Questions - How much flight time do you get on one battery? And does the DJI 03 air unit also record video, or is it just for FPV live feed? Oh, and how fast can this drone go? Thanks!
Yes, It was shot using Gopro 9, A small portion of the clip is from O3 itself. They are stock settings shot on 4K, 60FPS, ISO, Shutter etc all Auto. No ND filter used. Thank you
Great video. I have been dealing with an unfortunate issue that I believe I put myself into if anyone can help. I’m new to FPV and tried to edit the port tab, but when I pushed save and reboot, my whole list of UART’s reset and now I’m not sure which was selected and how. Any help on where I could find out how the quad comes preselected before I messed it up? Any help would be greatly appreciated.
Hello. Extremely sorry for the late response. This can happen if you enable the UART and select any peripheral at the same time. I hope you have figured this out by this time. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can. Thank you
Hello, can you tell me which battery you are using and how many grams the drone weighs? With my complete setup, the drone weighs 705 grams and it is very heavy. How many grams does the drone need to fly well and stably?
I would love to know how to build a Cinelog 35, because I built one and it flies like jello crap. A good tune and maybe solid camera mounts would do it wonders.
Hello, Question. Should i use the T Motor AIO used in this video or the original GEPRC GEP-F722-45A AIO V2? I think GEPRC AIO comes pre tuned? is it better than T motor AIO? what would you recommend?
It is better than Avata for some factors like ease of repair in case of crash etc. But avata is also than this for several factors including longer flight time. Both has its own advantages and disadvantages. You have to check what suits you the best. Thank you.
Hi guys. I finally finished thus drone build. I updatet to BF 4.5 and when i try to launch the drone its flips to one side. Checked Dshot Bi Dishot and motor and prob direction. Any idea? Somebody on reddit said, its the esc temp limit?
Thanks for the response. How do you mount the props? I have them with the label upside to the Sky. Did you change the aio orientation in BF? Maybe that is my problem?
Thank you. We wish if GEPRC had provided the GPS TPU Mount with the frame. We only had the yellow TPU here, so completed the build with it. Need to order other colors :)
Guys I couldn't figure out how to set board orientation, finally I did and it's all ok. But during the process I managed to switch OSD off. Have only DJI regular stuff but nothing from beta flight. Could someone send me a BF settings nplease for this drone, I believe I messed up with UART
Hello, Sorry for the late response. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can. Thank you
Hello It is Gemfan D90. We found better throttle control and less noise on 5 blade. But we will recommend you to try both and see which one works best for you. Thank you.
There are 2 set of M2 stand off given with the frame. One is very shorter that is used on the front side of the frame, to connect with duct. Second set is inserted inside the ducts as shown in the video. Thank you
![☀ Полноценная замена ваших старых Синелогов?! [GepRC Cinelog 30 V2]](http://i.ytimg.com/vi/6LP-i3SS5wU/mqdefault.jpg)
![☀ Полноценная замена ваших старых Синелогов?! [GepRC Cinelog 30 V2]](/img/tr.png)
![☀ Новый синелог. Задает тренд или просто выбесил? 🤬 [Cinelog35 V2]](http://i.ytimg.com/vi/3LXbOmqhwsE/mqdefault.jpg)
Amazing guys. as usual first commenter here. do more stuffs...Im a happy customer of you.
Thank you
Don’t forget to turn off air mode in Betaflight for this drone! It will destroy itself if it bumps anything in flight. I went through multiple carbon frames before I figured that out. Joshua Bardwell has a great video on air mode and what it does.
Yes, Works great.
Nice build! It’s been a good minute since I have built a FPV quad from ground up. The feeling of flying something you built is so rewarding and satisfying!
Yes, So satisfying. 100% Agreed!
Beautiful build, beautiful country. Thanks for sharing both!
Thank you
will the Dji o4 air unit fit inside of it?
Did the antenna mount and GoPro mount come with the Cinelog kit?
Yes, It comes with Frame Kit. GPS Mount is not included.
Great stuff guys. Thanks
Thank you. It mean alot to us :)
Amazing tutorial video, i have two questions, where can i purcahse a ready made drone as i have already have a go pro and dji controller and secondly is this better than the avata drone?
Hello, You can purchase a Ready to Fly of this drone from the GEPRC official website. Or you could check local hobby stores depending on where you are from. It is better than Avata in some factors and Avata is better than this one on some other factors.
Nice video! thanks for sharing!!
Thank you.
Great video. I'm searching for builds that goes well for a WN Moonlight kit. Can you make a build with the Moonlight kit? My idea is a cinewhoops that is great for indoor cinematic(slow) and can also move freestyle outdoor(fast) for night city cinematic. Can carry a naked action cam. Thanks in advance.😊
Thanks you. We haven't used the walksnail system for now. But we are planning to get one and try it. We will do one video soon.
superb❤🩹i almost build my cinewhoop with help of your last video. thank you for the detail video🙏
Thank you
Very cool! Questions - How much flight time do you get on one battery? And does the DJI 03 air unit also record video, or is it just for FPV live feed? Oh, and how fast can this drone go? Thanks!
Hello
Flight time is around 5 minutes.
DJI O3 also records video at 4K.
We haven't tested the speed, But it can go be pushed to 100 Km/hr, Possible.
Thanks for the video! Is it possible to install it on this cinewhoop Walksnail unit?
Yes, It is possible to install Walksnail unit on this Cinewhoop.
@@quadkart And what about Walksnail Moonlight ??
@@piotrkojder7177I am also interested in Walksnail Moonlight with Cinelog35 v2. Does it fit in the frame?
superb video...
Thanks alot
I assume the footage was from the go pro..care to share settings? nice video.
Yes, It was shot using Gopro 9, A small portion of the clip is from O3 itself. They are stock settings shot on 4K, 60FPS, ISO, Shutter etc all Auto. No ND filter used. Thank you
Great video. I have been dealing with an unfortunate issue that I believe I put myself into if anyone can help. I’m new to FPV and tried to edit the port tab, but when I pushed save and reboot, my whole list of UART’s reset and now I’m not sure which was selected and how. Any help on where I could find out how the quad comes preselected before I messed it up? Any help would be greatly appreciated.
Hello. Extremely sorry for the late response. This can happen if you enable the UART and select any peripheral at the same time. I hope you have figured this out by this time. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can.
Thank you
It was built to the specs in the video and didn't fly. The controller wasn't compatible with the propellers.
Hello. Which controller were you using?
Tang 2
TBS
@@falahyaqoob6628 You have to use Crossfire receiver for it.
I use crosfire
Can you share the PIDs please? TIA
Hello, We are using the stock PID tune.
hi. This is a good guide. I was wondering if you could share the CLI?
Hi, We are using the stock Betaflight tune and settings.
Hello, can you tell me which battery you are using and how many grams the drone weighs? With my complete setup, the drone weighs 705 grams and it is very heavy. How many grams does the drone need to fly well and stably?
Hello, We are using CNHL 1300Mah 6S 100C battery. We don't remember the exact weight, But around 700gram with full size gopro is normal.
liked the video, one suggestion - add voiceovers. & Texts, so beginners can understand easily
excuse me, can I build this with an analog cam and vix setup , with same other specs ?
Yes, You can build Analog of this same version. You can go for a vTX with 20x20 mounting pattern and a Micro Camera (19x19mm).
3d printed parts are aslo included in the frame kit single purchase ?
GPS Mount is not included with the Frame Kit. We printed it here. Rest all 3D Printed parts comes with frame.
@@quadkart how can i order the gps mount ?
I would love to know how to build a Cinelog 35, because I built one and it flies like jello crap. A good tune and maybe solid camera mounts would do it wonders.
It is all stock settings here. Never had any issues and flies smooth. Maybe you can share more info on the build and we can try to fix it? Thank you
Does the dji remote come with drone
This is a custom built drone. The cost breakup at the end of the video includes controller in it.
Hello, Question. Should i use the T Motor AIO used in this video or the original GEPRC GEP-F722-45A AIO V2?
I think GEPRC AIO comes pre tuned? is it better than T motor AIO?
what would you recommend?
Hello. Both are okay. Geprc AIO doesnt come pre tuned, But you can load their CLI. We haven't found much difference in flying.
@@quadkart Ok but what is CLI?
Tbs source one v5 build video please with build cost
Sure, On it!
What is the length of the antenna for the VTX?
Hello
It is the stock antenna that comes with DJI O3 Air unit. Thank you
Hello, question. Can i use CHNL BLACK 1500mAh 6S 100C 22.2V CNHL LiPo instead of 1300mah battery?
Yes, You can use. It will be slightly heavier. But it should be okay.
@@quadkart thank you ☺️
Is this better than the Avata 2?
It is better than Avata for some factors like ease of repair in case of crash etc. But avata is also than this for several factors including longer flight time. Both has its own advantages and disadvantages. You have to check what suits you the best. Thank you.
amazing video
Thank you
Hi guys. I finally finished thus drone build. I updatet to BF 4.5 and when i try to launch the drone its flips to one side. Checked Dshot Bi Dishot and motor and prob direction. Any idea? Somebody on reddit said, its the esc temp limit?
This mostly happens due to wrong propeller, Wrong motor direction, Wrong AIO orientation etc. Let us know if you need help to figure this out.
Thanks for the response. How do you mount the props? I have them with the label upside to the Sky.
Did you change the aio orientation in BF? Maybe that is my problem?
@@quadkart I have the same problem, should I change the degrees in FC alignment?
@@aqua_rezaina Check for FC Alignment. Also motor numbering, directions and propeller orientation.
make more videos bro
and use nd filter next time.
Thank you. We have few videos coming up. With ND Filter :)
battery back up time sir plz
Battery back up is around 5 minutes sir
Beautiful place.
Welcome to kerala😅
Thank you.
Gopro plate is mounted in the wrong orientation.
Yes. We noticed it after almost completing the build. If you check the time stamp 49:00, You can see we are putting it back correctly. Thank you
Nice build❤
Thank you
👏excellent bro ,Can I made this drone with elrs 16s remote?
If yes then what is the process?
Hello
Yes, You can add a ELRS receiver and bind it with TX16S.
Nice build
Thank you
Very nice and satisfying build. Would prefer the GPS TPU Mount to be black instead of yellow though ;)
Thank you. We wish if GEPRC had provided the GPS TPU Mount with the frame. We only had the yellow TPU here, so completed the build with it. Need to order other colors :)
Guys I couldn't figure out how to set board orientation, finally I did and it's all ok. But during the process I managed to switch OSD off. Have only DJI regular stuff but nothing from beta flight. Could someone send me a BF settings nplease for this drone, I believe I messed up with UART
Hello, Sorry for the late response. If you still need any assistance, You can get in touch with us on Whatsapp (+918281205193), or mail (Support@quadkart.in) We will help you out as much as we can. Thank you
Which 5-blade propeller did you use? The link isn’t working.
And which one is better 3 blade propeller or 5 blade propeller for indoor shots?
Hello
It is Gemfan D90. We found better throttle control and less noise on 5 blade. But we will recommend you to try both and see which one works best for you. Thank you.
can you tell me if this drone is good for indoors in a building were i can goto diff levels will it transmit through walls the signal
Hello
It can be used for Indoor shooting. But you will have to plan it if you are going in to differnt levels in a building. Thank you
Analog or digital?
hello men! please share the stl files for Ukrainian guy
Hello
www.thingiverse.com/thing:6070294, Here is the link for the GPS file.
Can you change the angle of o3 camera before flight?
Yes, It is adjustable.
@@quadkart thank you
These build videos are great bro Just found the channel and sub to it
Thank you :)
hey guys i am wondering if you can send me some parts plz so i can also start my fpv journey please
i am a big fan
Where is rx reciver?
We are not using any other receiver. Only DJI FPV Controller which can be binded with O3 Air unit. Thank you
add some coupons also ..Thanks 😆
😄
Nice!
Thank you
I wish my video came out that smooth LOL
Thank you. What setup are you flying?
@@quadkart same as yours GepRC Cinelog35 v2 O3 stick
What is maximum flight time with GoPro
Hello
We got a maximum of 6 minutes with Gopro using 1300Mah 6S Battery.
how to charge battery
m2x4x11.5 standoffs don't look like this. mine are shorter, 11.5mm in length. yours are like 25mm or so ...
There are 2 set of M2 stand off given with the frame. One is very shorter that is used on the front side of the frame, to connect with duct. Second set is inserted inside the ducts as shown in the video. Thank you
i want to buy price?
Hello,
Please get in touch with us on Whatsapp (+918281205193)
Thank you, the instructions on this V2 frame are terrible!
😍🔥
Thank you
how much did it cost to make
Hello
It cost around 1.3L. Thank you
Your Radio Controller link is wrong
Updated all the wrong product links in the description. Thank you
🔥😊
Thank you
It's showing Out of stock on your website, can you please help me to get this and spare propeller guards too of this for future, in Kolkata? Please?
Can you message us on Whatsap (8281205193) ? We will put together a build for you. Thanks
the piece TOP PLATE was inverted
Yes. We noticed it after almost completing the build. If you check the time stamp 49:00, You can see we are putting it back correctly. Thank you
@@quadkart THANK YOU FOR THE VIDEO IT HELPED ME A LOT IN REPLACING PARTS