Nice build bro! I love how you really thought out the 3D printed parts. Another thing you can do if you decide to take off the 3D printed Parts, Is use black gorilla glue and it foams up we'll to seal all those holes and you just cut the excess off with a razor blade and you won't be even to tell that you put holes there to begin with. Alsip awesome to glue 3D printed parts to foam you only need a tiny bit. Going to go find your maid in video now I just got into fpv planes and I want you to anything other than matek for Inav I tried six other boards they don't even come close to the performance of Maytek.
Think those slots you used for routing wires might better serve as mounting slots for carbon rods. Seems like the nose will be the first thing to break off.
Nice build, I’m also building one for long range and looking forward to flying it. My videos will be uploaded to my channel once I have fully finished the build.
why not mount the Matek F405 Wing with the arrow facing forward, fits better that way and then the speed control and radio line up with the board connections.
I like your setup here, but one thing that does concern me is the location of the GPS.. ZOHD says that the cooling port was computer optimized, I'm assuming this means they used cfd to develop that Port that you just put the GPS receiver in front of. If that's true there's a pretty good chance that by having that thing blocking the inlet you may be completely disrupting the airflow into your equipment Bay. It looks like they actually put a little bit of thought into the design to ensure proper cooling, so I would relocate it if I were you. Just my .02, otherwise great build! I'm probably going to pick one up for myself now for a NAVIO2/ 4GLTE super long range build.
Fantastic video 👏 nice detail in the video can you please try and do a build video of Sonic model HD wing or xuav mini talon with the matek f405 wing flight controller they are pretty good models and I would appreciate it if you could consider doing this thank you in advance.😀😀
Did you post the dump files?
Nice build bro! I love how you really thought out the 3D printed parts. Another thing you can do if you decide to take off the 3D printed Parts, Is use black gorilla glue and it foams up we'll to seal all those holes and you just cut the excess off with a razor blade and you won't be even to tell that you put holes there to begin with. Alsip awesome to glue 3D printed parts to foam you only need a tiny bit.
Going to go find your maid in video now I just got into fpv planes and I want you to anything other than matek for Inav I tried six other boards they don't even come close to the performance of Maytek.
Think those slots you used for routing wires might better serve as mounting slots for carbon rods. Seems like the nose will be the first thing to break off.
UART 6 is the dedicated TELEM uart (specifically for gps)
I’d like to see the software setup. My inav return to home won’t work.
what does it do in return to home?
Nice build, I’m also building one for long range and looking forward to flying it. My videos will be uploaded to my channel once I have fully finished the build.
Wow, wasn't expecting the cussing, pretty funny though. Awesome video!
why not mount the Matek F405 Wing with the arrow facing forward, fits better that way and then the speed control and radio line up with the board connections.
How much did this build cost you?
Sweet wing bro!!🔥🤙
I like your setup here, but one thing that does concern me is the location of the GPS.. ZOHD says that the cooling port was computer optimized, I'm assuming this means they used cfd to develop that Port that you just put the GPS receiver in front of. If that's true there's a pretty good chance that by having that thing blocking the inlet you may be completely disrupting the airflow into your equipment Bay. It looks like they actually put a little bit of thought into the design to ensure proper cooling, so I would relocate it if I were you. Just my .02, otherwise great build! I'm probably going to pick one up for myself now for a NAVIO2/ 4GLTE super long range build.
Merry Christmas...!!!
Merry Christmas :)
masha Allah... a fantastic video... insha Allah this will assist me a lot in my own build, thank you bro
I would have took a lower profile Antenna on that vtx. 🤔
Really fantastic wing, dude! Just remove the magnets that are close to the GPS, because of any interference. 😉
Merry Christmas!!! 😊
Merry Christmas :)
Fantastic video 👏 nice detail in the video can you please try and do a build video of Sonic model HD wing or xuav mini talon with the matek f405 wing flight controller they are pretty good models and I would appreciate it if you could consider doing this thank you in advance.😀😀
Amazing
Runcam support is good for you because of your yt channel. My experience was so bad, I stopped buying runcam
matek hv vtw uses 90degree mmcx out the box
First!!
Did you post the dump files?