75mm 2s Freestyle parts bin build - Desk Video
Вставка
- Опубліковано 13 вер 2024
- A breif desk review of my new 75mm 2s Freestyle parts bin build.
Kwad Build:
Frame: AlfaRc Rocky 75mm Freestyle
FC: HappyModel Crazybee F4 v3. AIO 1, 2-4s (same as original Cine8)
RX: Onboard (SPI FrSky)
VTX: Rush Tiny Tank 350mW
Motors: Older Style BetaFpv 0802 14000kv (courtesy of Xplicit FPV - Thanks Brother)
Props: Gemfan 40mm Bi-Blade
Camera: Caddx Ant.
VTX Antenna: Braided Dipole.
Special Thanks - to all the great folks at C2CFPV for their continued support and friendship.
Xplicit fpv, / slammedbug
Hillbilly fpv, / @hillbillyfpv1
Aythix FPV, / @aythixfpv
effinchet, / @effinchet6228
devilfpv, / @devilfpv6085
Rader FPV, / raderfpv
Gordon Scott, / @greatscottxs650
Ghost_OF_FPV_1151, / @lobsterman1151
FPV Budget Builds, / @fpvbudgetbuilds4631 ,
Stacy Abshire, / @stacemanfpv
JustJosh FPV, / @mousefillabong
Nice quad!
Thank you. It is a fun little ripper for small spaces. I have some test flight video posting soon.
no way!!! i have one of these!! mine is 1s though, 2s would be awsome! ❤
It, for sure, is fun, especially on the bi-blade props. Flight videos are processing, so keep an eye out for them.
For the future, rubbing alcohol releases most hot glue.
I will give that a try, but for me, it might just be better not to use the hot glue.
Awesome lil build bro! Love spare part builds!
Thank you. Yea, it's fun to just put a jumble of parts together and have a decent build at very little cost. Flight vids are coming soon.
Also an upgrade to a baby ratel2 on this little one.
That is so freaking cute. 😄 One word of advice about hot glue… Don’t 😉 E 6000, can be had at any hardware store, Walmart, etc. It is flexible when dry, sticks better and removes easily. It’s made with some sort of witchcraft. 🤷🏻😁
Great tip on the E6000. I use a product called welder that is similar for frame repairs. Im getting away from the hot glue. It causes me more damage than good, and its not made with some sort of witchcraft, so that might be why. 😃