VP9/P30 Comp Tracker & Sight Tracker Installation Guide
Вставка
- Опубліковано 1 лип 2020
- How to install the Heckler & Koch VP9 and P30 SIght Tracker and Comp Tracker accessories.
VP9 Comp Tracker: us.hkwebshop.com/hkstorefront...
VP9 Sight Tracker: us.hkwebshop.com/hkstorefront...
P30 Comp Tracker: us.hkwebshop.com/hkstorefront...
P30 Sight Tracker: us.hkwebshop.com/hkstorefront... - Наука та технологія
Looks way better than that HK store monstrosity
Just as a reminder.....dab will do you with Rocksett.....if you use a big glob, it will make removal much harder than using just a dab! Red Locktite would also be something to try and it might prove easier for removal should one want to take the comp or tracker off his/her pistol
Excellent video, made my install a snap. Thank you.
If attached to a P30 would this result in an overall slide length equivalent to a P30L for purposes of holster compatibility?
where do i get one of those "shim alignment tool" for a 9mm?
Will there be a compensator made for the p30L??
But why won't these work for the P30sk, P30L or VP9sk
Would this make it equivalent to a VP9L long slide in terms of recoil mitigation and accuracy?
I clicked on both of the links for the VP9 and they're both sending me to the comp itself. Does the comp come with the sight tracker tool? Or do I need to find it separately?
@Tuatha DeDanaan same price different name. In the video he talks about the sight tracker like it's the plastic piece he uses in the vice.
Question: I cannot find, anywhere on the HK website, a PV9 threaded barrel. I'm assuming that I need to replace the barrel that came with my stock PV9 in order to use the Compensator?
You want to look for VP9. The PV9 was discontinued
What's a pv9 ? Or are you referring to the vp ? Never heard of a pv9
Where can I find it in Europe?
Whats the difference between the sight tracker and the comp tracker?.?
Tuatha DeDanaan thank you!
I can’t believe I didn’t notice that..
This channel is Coronavirus proof ♥️
Recently purchased the PMM comp for my VP9. After installing the VP9 fails to feed. Thought it was possibly a magazine issue and checked all 5 mags, same issue. Uninstalled the comp from the threaded barrel, shoots fine. Put the standard barrel in, shoots fine. Any idea why the comp would cause it to not cycle/fail to feed?
did you leave proper clearance so the barrel could seat properly....it sounds like when you installed it, you did not leave the correct clearance
@@HKShootingwithDerekG mine did have a similar gap much like yours in the video and the barrel did lock up. I'm gonna give it another go this weekend.
PBwarrior22 10-4, report back and I’ll continue to try to assist....you should not have any problem if installed correctly
@@HKShootingwithDerekG copy that, thanks!
PMM comp is back on, followed the guide to the T! Hopefully will be able to get out and run a test this next weekend.
BEST FUCKING GUN BRAND YEE HAW!!!!11!!!!
Um dumb observation, but this looks like it makes fully field stripping for a good clean a major pain in the rear. I own a vp9 and p30, shoot them a lot and this just looks frustrating.
Not an issue at all....you disassemble the slide from the frame and then the only difference is you don’t remove the barrel....easy.....you can clean everything.....if you are fully disassembling every roll pin and every part on your VP9 for cleaning, you are destroying your gun. The VP9 or P30 disassembles as usual and can still be further disassembled for armorer work easily with the comp/sight tracker installed......good question and concern though
You can do everything but the barrel - even then, if you do a deep clean on the barrel a few times a year it’s not much more than 10 minutes a year
@@HKShootingwithDerekG I disagree, I think it is a issue. Not a huge one, but there is plenty of crap in between the slide and barrel that absolutely needs cleaned. Comp looks cool, but without removing the barrel from the slide, you won’t get to properly clean the slide. Especially need to clean where the firing pin protrudes, and the extractor as well.
Why not make one for SK!?
Will this work with a VP9 Tactical which has a threaded barrel?
Can you move your front sight from the slide to the compensator so it doesn't reciprocate during firing?
From what I've found you can buy some that have spots for front sights
Yep, I want a gun that requires a wrench and a vise for a simple field strip. That's the ticket.
This is why I use the quick detach comp from HK parts. No tools needed for instal/removal, and still let’s me get in touch with my inner John Wick
@@BlackAceDeathRose I struggled with this decision, the problem I had with the frame mounted HK comp was its god awful bulk, plus the fact that it drops the picatinny rail lower, making light activation wonky should I choose to go that way, on the other hand, the PMM comp on barrel does prohibit the removal of the barrel from the slide, but at worst its only going to affect cleaning ease, which does not impact gun function like lowering the picatinny rail or added bulk to the weapon like the HK comp does, so I went with the PMM comp, now hopefully i wont have trouble installing it, i bought a jarvis threaded barrel for the VP9, this pistol is not my carry piece, i'm just trickin it out a little as a range gun, my carry piece is a USP compact 9
Yes. It is not impossible to live with the slide and barrel married, but... what a stupid product!!! I will never be acused of having stupid ideas again!
Will this comp fit my P30L???
I wondered this as well, but the product page says it will not
Can’t the threaded barrel be purchased for the P30L?
@@carmaniac1029 Yes it can💯💯
What on earth does the compensator do? I thought it just makes the recoil much higher
Compensators make the recoil less. The extra weight makes the gun jump up less, and its ported on the top so it pushes the gas up-and the barrel down. Also decreasing recoil. They do Work!
the VP40 gets no love :(
40 is gross
@@HecklerKochTV If anything has rehabilitated the “they hate us” vibe of the old HK, it’s whoever has been doing HK’s social media in the past couple years. Simply brilliant. Keep up the good work (and occasional snark), we appreciate it.
PMM and HK sight Comp looks very similar but minor differences
The HK one is made by PMM
just ordered a threaded barrel and comp tracker cant lie I just want John wicks gun
must have made a deal with Parker Machine
I really like my Parker Machine. They look pretty similar thats for sure!
It is made by PMM.
What about the VP40?? Damm you, did you guys forget your roots? Give us some VP40 mods!!
Vp40 and the vp9 are the exact same gun you nimrod, just buy the comp that fits your caliber
@@rockhead1731 haha did you report/delete my comment you wuss??
Why the heck do you have a baby's binkie (pacifier) on your work bench?
For all the complainers out there.
I just got the 2020 vp9 on 6-30-20 got home loaded up and it jammed every mag I ran through it 7 total mags 7 jams?? Not what I expect from an HK
Please call customer service. Most likely ammo or grip related. They will help you.
Heckler & Koch the number is in the manual I’m assuming?
NHWilderness I’m sure it would be.
If not, easily locatable online.
NHWilderness it’s really really not supposed to do that!
I’ve had my P30 for almost two years, it’s only jammed once or twice, and they were both caused by the ammo. Don’t remember the brand, but it was aluminum, now I only use brass and haven’t had a problem.
Think I’m around 600 rounds in, haven’t shot as mich as I wish
Death By Lego yup I have a 45 and 40 tactical have had both for many years and have not had a single jam or problem with either of them know matter what ammo I use,I’m leaving the slide open when not in use heard maybe it needs to get broken in..maybe to much tension..?
NO NECESSARY
I love my VP9 but who on earth think that this is a great idea? watching this is already giving me a headache. I like to thoroughly clean and field strip my VP9, I would rather get the long slide instead.
Why didn`t you made a "H&K P90c" (FN P90 on 10mm) just like in "Fallout 2" (RPG) 10x20mm or 9x19mm (on 9x19mm it will be something like this in "Fallout 2" world: damage 10-15; distance 270-220 meters; ammo 27 bullets; speed 9 shots per second)??? On 10x20mm FN P90 is just like "FN FAL 7,62mm" or "Rifle Colt 5mm" at damage, distance and etc... In internet "fallout 2 weapons" you can see the characteristics of H&K P90c 10mm (ammo 24 bullets; speed 12 shots per second), FN FAL 7,62mm, AK-112 5mm ("Assault Karabine" it`s not russian AK, it`s "Rifle Colt")...
What is it with these people how is it that nobody knows how to properly use an adjustable wrench
H&K guns are so overrated.
I had a USP model that jammed every single round + tool mark. It was sent back to the factory, but it was just ignored by H&K. It sold now. Btw I've never seen any tool marks on Glock.
That’s the most overrated comment I’ve ever seen. Enjoy your block with that block trigger. Yack!!!!
I call B.S.💩