Towel Bar Repair! Fast, Easy, Strong!
Вставка
- Опубліковано 6 вер 2024
- Super EASY, FAST and STRONG fix to a loose towel bar!
Patreon: www.patreon.co...
Here is a link to the hardware: amzn.to/3a7A28a
Disclaimer: As an Amazon Associate I make a small commission of purchases through these links. Thanks for the support!!!!
I love that you pointed out that most of the time you are just trying to get the job done. Perfection is often unrealistic in real world carpentry.
Important to have a good meeting of perfection vs production. If someone goes towards one side too much, it can be an issue. Some want to get everything done quickly, but quality sucks and they get callbacks and a bad rep in general. Perfectionism doesn't work if things take 3 times as long. For instance opening up the wall for this towel bar and putting in backing goes from a 100 dollar or so repair, so several hundred dollars for time spent patching and painting, return trips, etc.
Should've rebuilt the whole house. Clearly the only correct solution.
😂
With the amount of DI-Why going on in my house, I have seriously considered this on multiple occasions.
I was a Hilti rep for years. They sell these both in 1/4” and 3/16”. These are my go to anchor. What is nice with these is if you remove the bolt the toggle does not fall into the wall unlike the butterfly style toggler.
I totally agree… those Hilti anchors rock.
I HATE those butterflies lol too many lost inside walls in south beach by me hahahaha. Can the hilti anchors be used for drywall? I use em for concrete
@@305liveandlearn yes. And they stay on the wall even when you remove the bolt.
@@robyarrow9690 see that's very useful 👌🏽 thanks for the tip
anchor at least one side into stud behind drywall if possible.
I like tools.
I use my tools.
I like to buy new tools.
I need a bigger house to fit my tools.
I'm a Chiropractor all week and on weekends I'm a carpenter, mechanic, landscaper and painter.
Did I mention that I like tools?
Feels like confessional!😂😁
I'm a full time handyman. I use these a couple of times a week. Towel bar and toilet paper holder repairs, and flat screen TV mounts all day long with these.
I recently redid our bathroom put some nice decorative wainscot on but before I did that I cut a hole in the wall where the wainscot would cover and slid some wood up behind where I knew the towel rack was going to be so now it has solid wood to bite into on both sides. Extremely useful for children who think that towel racks are monkey bars.
I have chisels I use when doing carpentry work that I have specifically for that, so if I hit a nail, it is not big deal. Then I have a set of good chisels I use for woodworking, which I keep in very good shape and extremely sharp. I sometimes use screwdrivers as chisels.
Gotta have a beater chisel
There are two uses for a chisel. If you do intricate wood work then you have a nice set of chisels you care for and keep sharp and keep from getting dings. But for the rest of us a chisel's ultimate purpose is "Destroyer of Worlds". We beat the crap out of them. Smash them into things with a hammer. We use them to rip wood, pry nails, cut off staples, gouge holes in walls, cut wire, whatever the job requires. They tend to last about 10 uses and then they are dull and gouged up and useless. Then we buy a new one!
Me too. I have a nice set that barely ever sees daylight😂
Run that dull chisel on your belt sander with 120 grit and sharpen her up in no time. My old boss sharpened his almost to the handle. Took him 15 years though.
You always seem so happy. I wish you were my contractor
Great video Ben. As a handyman I do a lot of towel bars. The zips work, but are too expensive and take extra time to drill the 1/4” holes through the hardware. Butterfly’s are cheap in bulk, strong, no modifications required which means I’m done sooner
I'm a contractor and I LOVED the defense of your use of a chisel for a screwdriver! I have 2 large chisels and 2 small ones in my tool bag. One of each for chopping out anything and everything without concern for the tool. The other 2 I keep sharp and in good condition for woodwork like a hinge mortise.
I have used them many times in our buildings at work with much success
I've used these before to support half of a TV mount where the studs were not the standard on center instead of tearing out and blocking it. They never failed on a 60" flatscreen TV, I had that mount up for 5 years before I moved to another house. I recently used them to re-mount a botched pedestal sink in the new house that the previous owner left, and they are solid. These are a definite time saver and work well. Oh, they have 2 sizes that I've found locally, the larger ones hold more weight, but I chose with the smaller ones for ease of installation and a smaller hole to patch in case they failed. Keep a few in your arsenal for easy fixes!
Oh yeah I forgot to add, don't use a hammer to tap in the plastic part after you snap off the support arms, it can cause the metal backer to dislocate and fall into the wall.
After fixing a bunch of these bars I noticed that any loose parts could make the whole thing loose over time. Meaning that once the bar in installed back you
shouldn’t have any movements. Avoid the «shaking» sound you hear at 10:24 (when you touch the bar). So I started putting a little bit of caulking in both open
areas of the two bar holders, then I put back the bar. (Or course you wipe out any caulking that will appear once the bar is installed). Once the caulking is dry
(or other glue) the bar doesn’t move at all and this operation makes the three parts (2 holders, 1 bar) as one solid piece.
For the question at the end I’m the kind of guy who go back to the store to get the right stuff. If you do something, do it right! :-)
I've used a butter knife from the kitchen drawer many times as a slotted screwdriver. Often to remove switch and receptacle plates before painting, and then to open a paint can. 🤭
I always carry an OLFA knife and use that for a flathead screwdriver.... I go through lots of knifes haha
@@Phazetic99 Those OLFA blade refills aren't cheap either! They're absolutely the best utility knives there are, though.
As a service tech, I live by "it doesn't need to be perfect, it just needs to work" every day. We are kings of getting by, and making things work to save time and money. Great video, after watching Project Farm's video on anchors, this just made me want to switch from the screw in style. Great video, again Ben!
Those Snap zip toggles are great. I pretty much only use those and triple grip cobra anchors when dealing with drywall. Those EZ screw in anchors just dig out the gypsum and turn it back into dust while blowing out the back paper. Many other wall anchors don't have a proper mechanism to spread the load across the back side of the paper without blowing it out, they are designed to put pressure on the inside of the drywall outward which causes blowouts.
I had a job where I had to change a bunch of old outlets. The screws for the outlets were for a flat blade screwdriver and had so much paint that a screwdriver wouldnt do it. I used my beater chisel as a screwdriver....really cut down on the minutes per outlet. Thanks! I like your channel.
I’m a DYI pro wanna be. Just about ready to replace bathroom fixtures, and this video steered me in the right direction because I know I’ll need new anchors. Well done!
I actually have hung on several of these before! I used them for a shelf and hanger bar in the closet for my wife. After it was done, I figured I would give it a try and ended up slightly bending the bar after hanging on it. The anchors held just fine though! (They are much harder to use if there is any insulation on the other side. Not impossible, just harder to get the metal part in far enough).
Great video. Thank you. I will have to get some of those doomaflichies for towel bar fixes. Great idea. If you want to relocate the towel bar for short people, just knock them inside the wall, repair the 1/2” hole, prime & paint, and it’s done. Yes, I’m a whatever gets the job done. Our working pace is pretty fast and going out to the truck which can be a good distance, makes you lose that momentum.
You said exactly what I was thinking... at that height, the towel bar is just calling out to have chin ups done on it! As an adult, I've never seen a towel bar that high! Last time a towel bar was above my head was when I was 6... 😂 Anyway, good video! I hadn't seen these anchors before...
Whatever it takes. I often by tools with multiple purposes, or figure out multiple purposes as I go. A trip to the store can easily cost an hour.
Purchased. Weird that I have the same exact towel bars in the US and they have Allen screws. I recently realized that for my whole life I've been putting toggle bolts on backwards. No wonder my towel bar is loose.
You're a pro! A pro always looks around to find something to use as a backup 'tool' to get the job done now, avoiding a trip to the store or work vehicle. Sometimes these descovered 'tools' work better than you anticipated and then become your secret weapon!
Those Togglers are my favorite for the heavy duty things like a wall mirror. I've used them enough that I learned once I push the metal part through the wall, if I grab each each of the two white straps independent of the other in each hand and pull them in opposite direction at the same time it opens the anchor up to the parallel to the wall position inside the wall:)
I use these Toggler zip toggle anchors to hang cabinets every day. They're a life saver in apartment buildings. You can also get a version with smaller machine screws. They are designed for use with concrete block as well as drywall, and have very good holding power when used correctly. Make sure the metal is vertical behind the drywall and pull the two tabs tight before you try to thread the bolt or it might spin inside the wall, which is annoying. Also, make sure the two ends of the plastic are equal or the metal may be sitting at an angle which will make it hard to thread the bolt. Take the two plastic parts, hold the ends together and just bend them up and down to break them off. And I've done a chin-up off a cabinet that was held up with these, sooo...yeah.
I am a licensed electrician for 45 years….those plastic toggle anchors are really good…..been using them for yeats
I've been using those Togglers in different sizes for ten years maybe. They're great. I used 'em a lot in commercial buildings with cinder block walls as well as drywall. There is no room for error when drilling the holes, but they have fantastic holding power. Just gotta be careful when tightening them. I've crushed the board a couple of times with my impact driver when in a hurry and being careless.
I have done used these before and had no trouble with them. I’m a handyman and use whatever I have on hand. I’ve used my 20volt batteries as a hammer.
If you are working in a condo (or somewhere they used skinny studs in a partition wall), sometimes there is not enough depth to be able to have the toggle swing open. I've had to cut 1/4 to 1/2 inch off the end of one side of the toggle to have it clear the back face of the drywall. Cordless grinder with a thin cut-off blade to the rescue.
There isn't a contractor out here who can say they have never used their cordless drill as a hammer...#whateverittakes
Again Vancouver carpenter you hit the nail on the head! Great videos very clear informative and helpful based on real life situations. Always looking forward for your next guidance.
Getting the job done is the way to go. Whatever tool works best. Thanks.
Lol, you rock buddy. If anyone thinks less of you for getting the job done then they are clueless.
They are great. Strong enough to hang cabinets from.
Tks for the video. Saw the same product on Project Farm and used it yesterday to install shelve brackets on a brick wall. Basically their not good for precision work. If you need precise hole location, these anchors will make your work very difficult as you have no wiggle room once installed. So if your carbide bit slides just an 1/8” inch, your anchor will be off center. Whereas with the old fashion butterfly anchor, their are way more forgiven in terms of placement. And their way cheaper. Another note on these plastic anchors, if you press them to hard during installation and at an angle, they will break.
A job done is better than a job not done! (as long as the results are the same and no damage was done!)
I commented about these in the last video, but have a comment for this one as well!. They also make a 3/16" version of this as well. The 1/2" hole is still the same. But the bolt is a little more manageable than the 1/4" for tighter spaces where the head can't be too big(unless your hanging something crazy heavy, then yeah use the 1/4").
Other advantage is you can also remove the bolt and reuse it, unlike the metal ones where you lose the piece in the wall.
Couple of nice points on those snap togglers
1. they also come in 3/16th bolt size
2. you can toss one up and as long as the plastic stays, you can take down and put back up the item that you hung.
3. they'll also hold pictures and other things where the bolt has to stick out extra from the wall instead of being fully tightened.
to snap them off, it's easier/faster to just push up and then down (or left/right depending on which way you orient them) with both pieces than to snap them off individually
I love Snap Togglers and I've been using them for years for mounting TVs and hanging shelves. They come in 3/16" for smaller holes and 1/4" for the big brackets. I buy them in bulk on eBay for around .50 cents a piece. One tip: you don't need to snap each side individually. Once the Toggler is in place, simply run your hand up across the plastic, and then down. You'll snap both pieces perfectly very quickly.
OMG! I, like others, have used and still use the same toggle bolts. Used them in my garage mostly, including hanging stuff from the ceiling. They are fantastic and work great!
I don't like using them for new work unless it's for something that's heavy and REALLY needs to NOT come loose, like for a giant mirror, but if it's just a picture or something like a towel bar, once a hole is gouged out from someone pulling an anchor loose, then they are really the only best option.
Keep on doing what you do!! I'm sure your not charging a 1000 dollars to fix a towel bar. So your methods are spot on.
:)
Great video as always. I frequently put a dab of silicone caulk inside the bar holder socket on the top so it hold the bar snugly in place. Makes the whole assembly feel higher quality.
Oh, I also destroy tools as needed because who needs a 15 year old screwdriver? Do what you've got to do and buy new as needed.
I'm definitely the type of person that babies my tools, I have to say I'm fussy with my tools and never use them for anything but what they were intended for. Probably just because they are too expensive to be buying over and over because of misuse. Another awesome video as usual.
Nice towel rail fixing. Thank you for sharing. I like to baby my precious tools but also like to get the job done too lol. Cheers mate. 🦘🇦🇺
As a DYI’er who is somewhat anal about my work, I’ll switch between always using the correct tools back to using screwdrivers as chisels. It depends on how much time and energy that I have to burn.
BTW - You are such a positive individual who seems to enjoy your work. Watching your videos always makes my days go better.
Thanks, VC. I'll use this method. BTW, wouldn't you want to remove the paint mess on the towel bar holder before reinstalling it? Would like to have seen your preferred method for that task.
These work great for anchoring through drywall into a metal stud.
Great point about making a job work versus perfect... it's all about cost and time management. The perfect way would cost $$$ and just for a 20$ towel bar
Snap toggles are extremely good stuff I’ve hung 75” TVs with these. Each one claims to hold 120kg. Love these to bits but recently I’ve comes across a
Few issues with these, if there is a vapour barrier in the stud wall these sometimes can’t open up. If there are insulations - same
Problem. Also have problems with them with a less shallow stud wall.
I've use those for tv mounts they are great. I will still add some 1/2 inch plywood mounted to the studs, for extra support. Because the packaging might say it will support 350 lbs. I dont believe that the sheetrock will support it.
I baby my stuff ridiculously...That's why I watch your videos :) ...to get the best ideas
I must admit you come up with some useful ideas and I get a good laugh at some of your remarks... thankyou for your posts! John 3:16
I get the job done but then feel bad for my tools sometimes and give them a wipe down it actually makes you feel refreshed surprisingly
I aspire to the Japanese ethic, you work fast, perfect & clean.
I used a special pair of tweezers to tighten the microscopic set screws in my el-cheapo but cute towel bars, 3 days ago! 😊 Do what you gotta do.
That's a forever fix great chose in hardware bro
I'm a trades person that tries to use the right tool for the depending on whether I have it or not. If I have it and it's conveniently close to me, I'll use it. If I'm up say a ladder or up on a second floor or top of some scaffolding I'll use what ever is handiest until either the job is done or I'm damaging something to much. It's a balance of convenience and just getting the job done because I've got other things to do. Yes I have used a screwdriver as a chisel and also a chisel as a screwdriver although the later alot less frequently. The one I use is a old chisel that I call my down and dirty chisel, it owes me nothing.
I have a couple of 15 year old beater chisels too :)
Pick up a package of the 3/16 version, which you will use for most light to medium weight items. It's the same 1/2 inch hole in the drywall though.
Too late now, but E-Z Anchor makes 100 lbs Drywall Toggle-Lock Anchors (#10006) that have a one-piece screw-in body with a flat toggle that will not eat into the backing of old drywall. It uses a small screw too, so you don't have to modify the mounting hardwares. I've used them on wire-racks, towel bars and tp holders... where-ever 300 lbs toggle bolts are over-kill.
Ben. THANK YOU.. I have thinking about using those hangers. I will buy some to have them in my stock.
I have banging screw drivers & chisels used just for those rough work.. I also have good screw drivers & chisel used for their respected uses & never cross them up.. Love your videos & Keep up the good work!
When I worked for Future Shop (Best Buy), we used those to install TVs… the rule was that we had to have one side in a stud and then we would use 2 of those for the other side…
Also when you were talking about how flimsy the plastic is, that only holds the metal piece in place to bolt it down, it doesn’t do anything other than that
Yeah, that was a detail I didn't think about until I looked up the part. The plastic is just holding the metal in place, and the screw is driven into the metal. Just like the butterfly toggles, but the screw is added after. With the butterfly toggle, you would need to thread the screw through the piece, then stuff the spring loaded part into the wall. With this plastic one, you also don't need to think about how much clearance you have behind the wall to unfurl the butterfly
I use a awl as depth gauge. Whatever works.👍👍
Loved loved loved! Gonna try those for my bathroom renovation. Thanks VC. Oh and I'm w/you . . . just want to get the job done.
those toggles are the best invention since baked bread! 4 of them will hang an 80" tv on dry wall!
I have a chisel I refer to as my 'shovel' because it's used for any sort of bashing action where I don't have space.
Removing a window in a double brick house and need to break the brick ties clouted onto it through a small gap? Shovel
Digging a small hole around a pipe? Shovel
Need to pry something open with leverage? Shovel.
Hell I'll use the shovel as a hammer too.
I'm a DIY and I've used that product and really like it. Only wish, which you may also agree, is if it came in smaller bolt configuration and having the plastic strips more durable - maybe metal or tin that can be cut to size.
Why would you want the plastic strips to be durable? They are designed to get the back portion in the wall and break off with ease lol. They do not play any role in the strength of the anchor.
Very impressive. I just did a quick search, but as with most good gear, not available down under. We have to order in, which virtually doubles the price.
it all depends on the situation.... but as you said it is all about to get the job done and good
Haha, I put these and another anchor in the comments on one of your other videos a few weeks ago. These are one of my favorite 3 anchors.
This is great info.that even us ladies can do. Thank you so much. This helps a lot coz I usually DIY some of the stuff in the house.
I’ve seen these toggles, never tried them. Always thought, why? But seeing them put to use, they have clear advantages over regular toggle bolts. As for the tools, if you take care of your tools, they will take care of you. I don’t baby my tools, sometimes ya gotta do what ya gotta do to get the job done. But I don’t abuse my tools, i.e. wrenches are not hammers, chisels are not substitutes for screwdrivers. So far it worked well for me, I still have all my fingers and both eyes.
I thought screwdrivers doubled as small chisels. Man I learn a lot from this channel.....
Didn't see your video on wall anchors that you reckon don't work but in my experience, Ramset Hollow Wall anchors work fine. As long as you choose the correct one for the thickness of your wall and preferably use the setting tool instead of trying to screw it up, they will sandwich the board perfectly. Using the screw to pull it up is difficult because you need to keep a lot of force toward the wall to make sure the anchor remains firmly seated against the wall and doesn't start to pull back. I've found the anchor you used in this vid are really good for those thick polystyrene rendered/clad walls.
If you search online there is different type of molly bolts. I believe there are smaller screw size for the type you used. On the molly bolts you have to match thickness of the wall it is written on the the package for what thickness; like it will be written for wall thickness 1/2 inch to 5/8 inch; you might have use the wrong wall size that's why it pulled through the drywall. I have a tool to use for setting the molly bolts it looks like a pop rivet gun. Stay safe.
Plaster board anchors are a hot topic for discussion.
All of them have their issues.
I never liked gravity toggles or spring toggles for a variety of reasons, but sometimes nothing else will get the job done. The biggest issue is they are a single use item, ya can't reuse or remove and replace with them.
I've used hundreds of those screw in Anchors, ( we call em wallmates here), I used to buy them in plastic and metal by the box of 100, but I've gone off them lately. The issue is half the time they come out of the wall when you unscrew the mounting screw leaving a ragged hole that is a pain to reuse.
These days my prefered plasteboard anchor is those expanding metal "Daisy bolts", installed properly they can be incredibly strong.
BUT you have to pay attention to install them properly.
First you need a clean hole where the paper is not torn on the back.
Second you need the right size for the plaster thickness and the load carried.
Fail in the above two and the load carrying will be badly effected.
Setting them with the prescribed tool also makes the results far more predictable
The other thing is brand, while the generic ones can work very well most of the time, the name brand anchors are much more consistent.
I don't know about the US and Canada, but here in AU, ALDI sells kits of daisy bolts from time to time with a fixing tool ..... I always buy a hand full of those kits when they come up.
BUT where it matters or the wall is a little "difficult" I use only brand name anchors.
BTW if you are going to use the ALDI setting tool, replace the little cap screw that holds the setting jaws onto the pulling shaft, with a high tensile one as long as will fit. That is the one straight in the business end of the tool.
I've seen those anchors you demonstrate both in vids and on the shelf, yeh there are times when nothing else will get you out of trouble, and very little will be stronger, but they are expensive, slow and are pretty bulky once fitted.
Not something I'd want to use 30 or 40 of in a day
ANYway
You are right again, used this method and saved my self hours. Thanks
I do use those all the time they are very strong good choice 👍🏼
I’m just a homeowner who tries to do it himself. I will say though you were the sole reason I went out and bought a darby. -U10
nice departure video from dry wall (though watching all those makes me appreciate why the drywall part of our reno seemed to take so long , I hope we got a quality job like you do ) - It would also be interesting to see some finish carpentry or installation of double closet doors (as a replacement of annoying bifold doors ) - really enjoying all your videos !!!!!!!!!!!!!!!! thank you so much ( I confess my husband wasn't thrilled when he realized I "borrowed' one of his chisels to open a paint can 30 years ago - - I did think it was a funny screw driver !!! )
I use whatever I have that will work. Nice review, I'll have to try those someday. Great videos! 👍👍👍👍
Omgs- the regular toggle bolt video gave me shivers 😝 I literally can't Stand them. Been using the togglers for 20 years and Absolutely swear by them. One of the best bonuses is that you can pull out the bolts and reinstall them again and again. These things are the bomb!!! Rock solid And they hold better than the regular toggle bolts too, because they pull flat to the rock instead of biting in points. Despise regular toggles, did I mention that? 🤪
I think these are way better too. Just never thought to try them.
Step bits are worth their weight in gold! Especially if you already have a hole that you need to make bigger. 😊
Toggle bolts are all I use for hand and towel bars. I use to work maintenance for apartments and other properties. You see it all the time...someone rips off the bar or breaks the drywall because those plastic anchors!!! What are people doing in those bathrooms anyway...pull-ups???
It helps to have the right tool for the right job !!
I agree very much with you about using whatever you need to to get the job done at the time. As far as whether you should use tools to do whatever you need to do instead of keeping them perfect, there's a difference between doing it commercial purposes or doing it for yourself at home. Normally when a carpenter or anyone goes and does a job for someone else they get paid for it. So then with the profit you make it's not any kind of issue to go buy new tools all the time. If you're the weekend warrior type like you mentioned, and are just doing things around your own house or for yourself, odds are pretty high you're not going to get paid for doing it. That makes it not quite as easy to run out and buy new ones all the time. I would think in a lot of cases that would be a big influence as far as that goes. I did disaster restoration work for several years. And I constantly had to buy new tools while I was working. But now not working anymore, I don't want to wreck the tools I have because I'm not getting income from using them anymore. I'm only getting my own self-satisfaction out of them now.
We use those to hang TVs can usually only get one stud. Those are usually rated for hundreds of pounds. So they say. I bought that exact same screw driver to do the same thing lol
For me, DIY Good Enough is Perfection
I use whatever I need to get the job done!
I grew up watching me dad improvise, he used whatever was on hand and I guess I’m the same way now 😳
Professional auto mechanic. I have tools I baby, but definitely not above getting the job done.
Another good solution is to mount a 3/4 inch by whatever width and length is needed to cover any gaping damage to the drywall and catch at least two studs. Almost like a backer board, but on the wrong side. Very strong and easy to replace if ever needed. P.S. Have you considered trying carpentry? I know you'd be good at it.
yep, round over the edges with a router to give a finish look, paint or stain.. good option when the drywall is fricked.
They work great.....I'm impressed.
Looks great for exterior brick application too! Flagpole mounts, eh?
I use them for safety handle in showers. Except one time when I drilled the hole and found the there was NO board behind the tile. No drywall, no cement board nothing. 3/8inch thick tiles stacked upon each other. I think the edges were glued together. I told my client, she said she would deal with the tile guy!
As a former tile guy, I can tell you it would be practically impossible to install them like that. I’ve never heard of anyone even attempting such a thing and I’ve seen all kinds of hack crap throughout the years. Was it an older shower? It’s possible that water was getting behind the tile and termites came in and ate most of the backer board.
I'm a baby and I cant help it😣. But i def have lots of idgaf moments and def know how to get it done with whatever I have in hand. Isnt that what separates a pro from a diyer? Being able to get the job done with what you have in hand?
I “try” to use the right tool for the job. I am a weeked warrior when in comes to home repairs, car mechanics, landscaping… I would likely make the trip to the van or more likely the other end of the house in most cases to get a tool. That being said i have “innovated” one tool into the tool I wish I had but wasn’t going out to buy it. This can and has lead to buying 2 tools next time I at lowes/home depot/the hardware store/on amazon… the actual tool and a replacement for the “innovation”. I am an engineer, if you think knowing a little is dangerous, try knowing a lot. lol. For the record just about anything flat is a screwdriver and anything heavy is a hammer. 🤣😂🤣😂🤣 Lastly and most importantly, loving all the videos!
The metal hollow wall anchor is meant to be set in place with a raulplug setting tool, not sure how much of a difference it actually makes tho!
And I think he had the size for hanging on a door too. They normally don’t squeeze down to an 1/8th.
The specialized setting tool makes a world of difference when installing "molly bolt" hollow wall anchors, and is definitely a worthwhile purchase. Fast and easy to use, with very little chance of a failed install.
Whatever it takes! My tool bucket chisels are a multi-use device!!
Those are my 2nd fav anchor, and GREAT VID.
Love the jokes, and gotta say, think any woodworker would baby there hand tools, especially chisels, hand planer, etc….🤣
hate it when my kids get "yoinking on the towel bar!" ha ha ha... dah! great video, as always.
:)
I make furniture. I have a buddy who does a lot of home repair. He brings chisels to me a couple of times a year to be "restored". He's my bud so I do it, but damn he abuses his tools, some of those things are like 2 inches long now.
I am a professional, licensed tradesman. I have many, many, many specialty tools. When I start a job I grab what I figure I will need and load them up on my cart, and wheel it wherever in the plant the job is to be done. If it turns out I need something that I didn't bring, and I'm a three minute walk from my tool boxes then suddenly my tool horizons broaden. A screwdriver makes a fine cold chisel when whacked with a crescent wrench. Whatever gets the job done.
It astonishes me that most of the other tradesmen that I know use the most shockingly crappy tools. Mastercraft, Husky, Kobalt, even (and I shudder to even mention it...) Power Fist.
I like good tools, but you don't always have the perfect tool available. Get the job done and hope nobody catches you. :)
When I worked on jobsites I was using the best I could afford. It turns out that other "tradesmen" couldn't afford any of their own so they just took mine. I learned fast. Buy shitty tools if you work in construction. They aren't worth anything at the pawn shops.
@@peternorthe1912 I work in a much more constrained area. Just this morning I had a couple of tools returned by the night shift - they had found them on various panels through the night, where I had left them during the day. :) When something disappears I just have to wait a while and it will come back when somebody finds it.
I can TOTALLY understand where you're coming from, though. I used to drive a service van and I had to be waaaay more careful.
Good job figuring out you were hitting the other side of the wall. I'm a get it done kind of guy.